# Copyright 2019-2021 VyOS maintainers and contributors # # This library is free software; you can redistribute it and/or # modify it under the terms of the GNU Lesser General Public # License as published by the Free Software Foundation; either # version 2.1 of the License, or (at your option) any later version. # # This library is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # Lesser General Public License for more details. # # You should have received a copy of the GNU Lesser General Public # License along with this library. If not, see . from netifaces import interfaces import os import re import json import jmespath from copy import deepcopy from glob import glob from ipaddress import IPv4Network from netifaces import ifaddresses # this is not the same as socket.AF_INET/INET6 from netifaces import AF_INET from netifaces import AF_INET6 from vyos import ConfigError from vyos.configdict import list_diff from vyos.configdict import dict_merge from vyos.configdict import get_vlan_ids from vyos.template import render from vyos.util import mac2eui64 from vyos.util import dict_search from vyos.util import read_file from vyos.util import get_interface_config from vyos.util import is_systemd_service_active from vyos.util import is_ipv6_enabled from vyos.template import is_ipv4 from vyos.template import is_ipv6 from vyos.validate import is_intf_addr_assigned from vyos.validate import is_ipv6_link_local from vyos.validate import assert_boolean from vyos.validate import assert_list from vyos.validate import assert_mac from vyos.validate import assert_mtu from vyos.validate import assert_positive from vyos.validate import assert_range from vyos.ifconfig.control import Control from vyos.ifconfig.vrrp import VRRP from vyos.ifconfig.operational import Operational from vyos.ifconfig import Section from netaddr import EUI from netaddr import mac_unix_expanded class Interface(Control): # This is the class which will be used to create # self.operational, it allows subclasses, such as # WireGuard to modify their display behaviour OperationalClass = Operational options = ['debug', 'create'] required = [] default = { 'debug': True, 'create': True, } definition = { 'section': '', 'prefixes': [], 'vlan': False, 'bondable': False, 'broadcast': False, 'bridgeable': False, 'eternal': '', } _command_get = { 'admin_state': { 'shellcmd': 'ip -json link show dev {ifname}', 'format': lambda j: 'up' if 'UP' in jmespath.search('[*].flags | [0]', json.loads(j)) else 'down', }, 'alias': { 'shellcmd': 'ip -json -detail link list dev {ifname}', 'format': lambda j: jmespath.search('[*].ifalias | [0]', json.loads(j)) or '', }, 'mac': { 'shellcmd': 'ip -json -detail link list dev {ifname}', 'format': lambda j: jmespath.search('[*].address | [0]', json.loads(j)), }, 'min_mtu': { 'shellcmd': 'ip -json -detail link list dev {ifname}', 'format': lambda j: jmespath.search('[*].min_mtu | [0]', json.loads(j)), }, 'max_mtu': { 'shellcmd': 'ip -json -detail link list dev {ifname}', 'format': lambda j: jmespath.search('[*].max_mtu | [0]', json.loads(j)), }, 'mtu': { 'shellcmd': 'ip -json -detail link list dev {ifname}', 'format': lambda j: jmespath.search('[*].mtu | [0]', json.loads(j)), }, 'oper_state': { 'shellcmd': 'ip -json -detail link list dev {ifname}', 'format': lambda j: jmespath.search('[*].operstate | [0]', json.loads(j)), }, 'vrf': { 'shellcmd': 'ip -json -detail link list dev {ifname}', 'format': lambda j: jmespath.search('[*].master | [0]', json.loads(j)), }, } _command_set = { 'admin_state': { 'validate': lambda v: assert_list(v, ['up', 'down']), 'shellcmd': 'ip link set dev {ifname} {value}', }, 'alias': { 'convert': lambda name: name if name else '', 'shellcmd': 'ip link set dev {ifname} alias "{value}"', }, 'bridge_port_isolation': { 'validate': lambda v: assert_list(v, ['on', 'off']), 'shellcmd': 'bridge link set dev {ifname} isolated {value}', }, 'mac': { 'validate': assert_mac, 'shellcmd': 'ip link set dev {ifname} address {value}', }, 'mtu': { 'validate': assert_mtu, 'shellcmd': 'ip link set dev {ifname} mtu {value}', }, 'vrf': { 'convert': lambda v: f'master {v}' if v else 'nomaster', 'shellcmd': 'ip link set dev {ifname} {value}', }, } _sysfs_set = { 'arp_cache_tmo': { 'location': '/proc/sys/net/ipv4/neigh/{ifname}/base_reachable_time_ms', }, 'arp_filter': { 'validate': assert_boolean, 'location': '/proc/sys/net/ipv4/conf/{ifname}/arp_filter', }, 'arp_accept': { 'validate': lambda arp: assert_range(arp,0,2), 'location': '/proc/sys/net/ipv4/conf/{ifname}/arp_accept', }, 'arp_announce': { 'validate': assert_boolean, 'location': '/proc/sys/net/ipv4/conf/{ifname}/arp_announce', }, 'arp_ignore': { 'validate': assert_boolean, 'location': '/proc/sys/net/ipv4/conf/{ifname}/arp_ignore', }, 'ipv4_forwarding': { 'validate': assert_boolean, 'location': '/proc/sys/net/ipv4/conf/{ifname}/forwarding', }, 'rp_filter': { 'validate': lambda flt: assert_range(flt,0,3), 'location': '/proc/sys/net/ipv4/conf/{ifname}/rp_filter', }, 'ipv6_accept_ra': { 'validate': lambda ara: assert_range(ara,0,3), 'location': '/proc/sys/net/ipv6/conf/{ifname}/accept_ra', }, 'ipv6_autoconf': { 'validate': lambda aco: assert_range(aco,0,2), 'location': '/proc/sys/net/ipv6/conf/{ifname}/autoconf', }, 'ipv6_forwarding': { 'validate': lambda fwd: assert_range(fwd,0,2), 'location': '/proc/sys/net/ipv6/conf/{ifname}/forwarding', }, 'ipv6_dad_transmits': { 'validate': assert_positive, 'location': '/proc/sys/net/ipv6/conf/{ifname}/dad_transmits', }, 'path_cost': { # XXX: we should set a maximum 'validate': assert_positive, 'location': '/sys/class/net/{ifname}/brport/path_cost', 'errormsg': '{ifname} is not a bridge port member' }, 'path_priority': { # XXX: we should set a maximum 'validate': assert_positive, 'location': '/sys/class/net/{ifname}/brport/priority', 'errormsg': '{ifname} is not a bridge port member' }, 'proxy_arp': { 'validate': assert_boolean, 'location': '/proc/sys/net/ipv4/conf/{ifname}/proxy_arp', }, 'proxy_arp_pvlan': { 'validate': assert_boolean, 'location': '/proc/sys/net/ipv4/conf/{ifname}/proxy_arp_pvlan', }, # link_detect vs link_filter name weirdness 'link_detect': { 'validate': lambda link: assert_range(link,0,3), 'location': '/proc/sys/net/ipv4/conf/{ifname}/link_filter', }, } _sysfs_get = { 'arp_cache_tmo': { 'location': '/proc/sys/net/ipv4/neigh/{ifname}/base_reachable_time_ms', }, 'arp_filter': { 'location': '/proc/sys/net/ipv4/conf/{ifname}/arp_filter', }, 'arp_accept': { 'location': '/proc/sys/net/ipv4/conf/{ifname}/arp_accept', }, 'arp_announce': { 'location': '/proc/sys/net/ipv4/conf/{ifname}/arp_announce', }, 'arp_ignore': { 'location': '/proc/sys/net/ipv4/conf/{ifname}/arp_ignore', }, 'ipv4_forwarding': { 'location': '/proc/sys/net/ipv4/conf/{ifname}/forwarding', }, 'rp_filter': { 'location': '/proc/sys/net/ipv4/conf/{ifname}/rp_filter', }, 'ipv6_accept_ra': { 'location': '/proc/sys/net/ipv6/conf/{ifname}/accept_ra', }, 'ipv6_autoconf': { 'location': '/proc/sys/net/ipv6/conf/{ifname}/autoconf', }, 'ipv6_forwarding': { 'location': '/proc/sys/net/ipv6/conf/{ifname}/forwarding', }, 'ipv6_dad_transmits': { 'location': '/proc/sys/net/ipv6/conf/{ifname}/dad_transmits', }, 'proxy_arp': { 'location': '/proc/sys/net/ipv4/conf/{ifname}/proxy_arp', }, 'proxy_arp_pvlan': { 'location': '/proc/sys/net/ipv4/conf/{ifname}/proxy_arp_pvlan', }, 'link_detect': { 'location': '/proc/sys/net/ipv4/conf/{ifname}/link_filter', }, } @classmethod def exists(cls, ifname): return os.path.exists(f'/sys/class/net/{ifname}') @classmethod def get_config(cls): """ Some but not all interfaces require a configuration when they are added using iproute2. This method will provide the configuration dictionary used by this class. """ return deepcopy(cls.default) def __init__(self, ifname, **kargs): """ This is the base interface class which supports basic IP/MAC address operations as well as DHCP(v6). Other interface which represent e.g. and ethernet bridge are implemented as derived classes adding all additional functionality. For creation you will need to provide the interface type, otherwise the existing interface is used DEBUG: This class has embedded debugging (print) which can be enabled by creating the following file: vyos@vyos# touch /tmp/vyos.ifconfig.debug Example: >>> from vyos.ifconfig import Interface >>> i = Interface('eth0') """ self.config = deepcopy(kargs) self.config['ifname'] = self.ifname = ifname self._admin_state_down_cnt = 0 # we must have updated config before initialising the Interface super().__init__(**kargs) if not self.exists(ifname): # Any instance of Interface, such as Interface('eth0') can be used # safely to access the generic function in this class as 'type' is # unset, the class can not be created if not self.iftype: raise Exception(f'interface "{ifname}" not found') self.config['type'] = self.iftype # Should an Instance of a child class (EthernetIf, DummyIf, ..) # be required, then create should be set to False to not accidentally create it. # In case a subclass does not define it, we use get to set the default to True if self.config.get('create',True): for k in self.required: if k not in kargs: name = self.default['type'] raise ConfigError(f'missing required option {k} for {name} {ifname} creation') self._create() # If we can not connect to the interface then let the caller know # as the class could not be correctly initialised else: raise Exception(f'interface "{ifname}" not found!') # temporary list of assigned IP addresses self._addr = [] self.operational = self.OperationalClass(ifname) self.vrrp = VRRP(ifname) def _create(self): cmd = 'ip link add dev {ifname} type {type}'.format(**self.config) self._cmd(cmd) def remove(self): """ Remove interface from operating system. Removing the interface deconfigures all assigned IP addresses and clear possible DHCP(v6) client processes. Example: >>> from vyos.ifconfig import Interface >>> i = Interface('eth0') >>> i.remove() """ # remove all assigned IP addresses from interface - this is a bit redundant # as the kernel will remove all addresses on interface deletion, but we # can not delete ALL interfaces, see below self.flush_addrs() # --------------------------------------------------------------------- # Any class can define an eternal regex in its definition # interface matching the regex will not be deleted eternal = self.definition['eternal'] if not eternal: self._delete() elif not re.match(eternal, self.ifname): self._delete() def _delete(self): # NOTE (Improvement): # after interface removal no other commands should be allowed # to be called and instead should raise an Exception: cmd = 'ip link del dev {ifname}'.format(**self.config) return self._cmd(cmd) def get_min_mtu(self): """ Get hardware minimum supported MTU Example: >>> from vyos.ifconfig import Interface >>> Interface('eth0').get_min_mtu() '60' """ return int(self.get_interface('min_mtu')) def get_max_mtu(self): """ Get hardware maximum supported MTU Example: >>> from vyos.ifconfig import Interface >>> Interface('eth0').get_max_mtu() '9000' """ return int(self.get_interface('max_mtu')) def get_mtu(self): """ Get/set interface mtu in bytes. Example: >>> from vyos.ifconfig import Interface >>> Interface('eth0').get_mtu() '1500' """ return int(self.get_interface('mtu')) def set_mtu(self, mtu): """ Get/set interface mtu in bytes. Example: >>> from vyos.ifconfig import Interface >>> Interface('eth0').set_mtu(1400) >>> Interface('eth0').get_mtu() '1400' """ tmp = self.get_interface('mtu') if str(tmp) == mtu: return None return self.set_interface('mtu', mtu) def get_mac(self): """ Get current interface MAC (Media Access Contrl) address used. Example: >>> from vyos.ifconfig import Interface >>> Interface('eth0').get_mac() '00:50:ab:cd:ef:00' """ return self.get_interface('mac') def get_mac_synthetic(self): """ Get a synthetic MAC address. This is a common method which can be called from derived classes to overwrite the get_mac() call in a generic way. NOTE: Tunnel interfaces have no "MAC" address by default. The content of the 'address' file in /sys/class/net/device contains the local-ip thus we generate a random MAC address instead Example: >>> from vyos.ifconfig import Interface >>> Interface('eth0').get_mac() '00:50:ab:cd:ef:00' """ from hashlib import sha256 # Get processor ID number cpu_id = self._cmd('sudo dmidecode -t 4 | grep ID | head -n1 | sed "s/.*ID://;s/ //g"') # XXX: T3894 - it seems not all systems have eth0 - get a list of all # available Ethernet interfaces on the system (without VLAN subinterfaces) # and then take the first one. all_eth_ifs = [x for x in Section.interfaces('ethernet') if '.' not in x] first_mac = Interface(all_eth_ifs[0]).get_mac() sha = sha256() # Calculate SHA256 sum based on the CPU ID number, eth0 mac address and # this interface identifier - this is as predictable as an interface # MAC address and thus can be used in the same way sha.update(cpu_id.encode()) sha.update(first_mac.encode()) sha.update(self.ifname.encode()) # take the most significant 48 bits from the SHA256 string tmp = sha.hexdigest()[:12] # Convert pseudo random string into EUI format which now represents a # MAC address tmp = EUI(tmp).value # set locally administered bit in MAC address tmp |= 0xf20000000000 # convert integer to "real" MAC address representation mac = EUI(hex(tmp).split('x')[-1]) # change dialect to use : as delimiter instead of - mac.dialect = mac_unix_expanded return str(mac) def set_mac(self, mac): """ Set interface MAC (Media Access Contrl) address to given value. Example: >>> from vyos.ifconfig import Interface >>> Interface('eth0').set_mac('00:50:ab:cd:ef:01') """ # If MAC is unchanged, bail out early if mac == self.get_mac(): return None # MAC address can only be changed if interface is in 'down' state prev_state = self.get_admin_state() if prev_state == 'up': self.set_admin_state('down') self.set_interface('mac', mac) # Turn an interface to the 'up' state if it was changed to 'down' by this fucntion if prev_state == 'up': self.set_admin_state('up') def set_vrf(self, vrf): """ Add/Remove interface from given VRF instance. Example: >>> from vyos.ifconfig import Interface >>> Interface('eth0').set_vrf('foo') >>> Interface('eth0').set_vrf() """ tmp = self.get_interface('vrf') if tmp == vrf: return None self.set_interface('vrf', vrf) def set_arp_cache_tmo(self, tmo): """ Set ARP cache timeout value in seconds. Internal Kernel representation is in milliseconds. Example: >>> from vyos.ifconfig import Interface >>> Interface('eth0').set_arp_cache_tmo(40) """ tmo = str(int(tmo) * 1000) tmp = self.get_interface('arp_cache_tmo') if tmp == tmo: return None return self.set_interface('arp_cache_tmo', tmo) def set_arp_filter(self, arp_filter): """ Filter ARP requests 1 - Allows you to have multiple network interfaces on the same subnet, and have the ARPs for each interface be answered based on whether or not the kernel would route a packet from the ARP'd IP out that interface (therefore you must use source based routing for this to work). In other words it allows control of which cards (usually 1) will respond to an arp request. 0 - (default) The kernel can respond to arp requests with addresses from other interfaces. This may seem wrong but it usually makes sense, because it increases the chance of successful communication. IP addresses are owned by the complete host on Linux, not by particular interfaces. Only for more complex setups like load- balancing, does this behaviour cause problems. """ tmp = self.get_interface('arp_filter') if tmp == arp_filter: return None return self.set_interface('arp_filter', arp_filter) def set_arp_accept(self, arp_accept): """ Define behavior for gratuitous ARP frames who's IP is not already present in the ARP table: 0 - don't create new entries in the ARP table 1 - create new entries in the ARP table Both replies and requests type gratuitous arp will trigger the ARP table to be updated, if this setting is on. If the ARP table already contains the IP address of the gratuitous arp frame, the arp table will be updated regardless if this setting is on or off. """ tmp = self.get_interface('arp_accept') if tmp == arp_accept: return None return self.set_interface('arp_accept', arp_accept) def set_arp_announce(self, arp_announce): """ Define different restriction levels for announcing the local source IP address from IP packets in ARP requests sent on interface: 0 - (default) Use any local address, configured on any interface 1 - Try to avoid local addresses that are not in the target's subnet for this interface. This mode is useful when target hosts reachable via this interface require the source IP address in ARP requests to be part of their logical network configured on the receiving interface. When we generate the request we will check all our subnets that include the target IP and will preserve the source address if it is from such subnet. Increasing the restriction level gives more chance for receiving answer from the resolved target while decreasing the level announces more valid sender's information. """ tmp = self.get_interface('arp_announce') if tmp == arp_announce: return None return self.set_interface('arp_announce', arp_announce) def set_arp_ignore(self, arp_ignore): """ Define different modes for sending replies in response to received ARP requests that resolve local target IP addresses: 0 - (default): reply for any local target IP address, configured on any interface 1 - reply only if the target IP address is local address configured on the incoming interface """ tmp = self.get_interface('arp_ignore') if tmp == arp_ignore: return None return self.set_interface('arp_ignore', arp_ignore) def set_ipv4_forwarding(self, forwarding): """ Configure IPv4 forwarding. """ tmp = self.get_interface('ipv4_forwarding') if tmp == forwarding: return None return self.set_interface('ipv4_forwarding', forwarding) def set_ipv4_source_validation(self, value): """ Help prevent attacks used by Spoofing IP Addresses. Reverse path filtering is a Kernel feature that, when enabled, is designed to ensure packets that are not routable to be dropped. The easiest example of this would be and IP Address of the range 10.0.0.0/8, a private IP Address, being received on the Internet facing interface of the router. As per RFC3074. """ if value == 'strict': value = 1 elif value == 'loose': value = 2 else: value = 0 all_rp_filter = int(read_file('/proc/sys/net/ipv4/conf/all/rp_filter')) if all_rp_filter > value: global_setting = 'disable' if all_rp_filter == 1: global_setting = 'strict' elif all_rp_filter == 2: global_setting = 'loose' print(f'WARNING: Global source-validation is set to "{global_setting}\n"' \ 'this overrides per interface setting!') tmp = self.get_interface('rp_filter') if int(tmp) == value: return None return self.set_interface('rp_filter', value) def set_ipv6_accept_ra(self, accept_ra): """ Accept Router Advertisements; autoconfigure using them. It also determines whether or not to transmit Router Solicitations. If and only if the functional setting is to accept Router Advertisements, Router Solicitations will be transmitted. 0 - Do not accept Router Advertisements. 1 - (default) Accept Router Advertisements if forwarding is disabled. 2 - Overrule forwarding behaviour. Accept Router Advertisements even if forwarding is enabled. """ tmp = self.get_interface('ipv6_accept_ra') if tmp == accept_ra: return None return self.set_interface('ipv6_accept_ra', accept_ra) def set_ipv6_autoconf(self, autoconf): """ Autoconfigure addresses using Prefix Information in Router Advertisements. """ tmp = self.get_interface('ipv6_autoconf') if tmp == autoconf: return None return self.set_interface('ipv6_autoconf', autoconf) def add_ipv6_eui64_address(self, prefix): """ Extended Unique Identifier (EUI), as per RFC2373, allows a host to assign itself a unique IPv6 address based on a given IPv6 prefix. Calculate the EUI64 from the interface's MAC, then assign it with the given prefix to the interface. """ # T2863: only add a link-local IPv6 address if the interface returns # a MAC address. This is not the case on e.g. WireGuard interfaces. mac = self.get_mac() if mac: eui64 = mac2eui64(mac, prefix) prefixlen = prefix.split('/')[1] self.add_addr(f'{eui64}/{prefixlen}') def del_ipv6_eui64_address(self, prefix): """ Delete the address based on the interface's MAC-based EUI64 combined with the prefix address. """ if is_ipv6(prefix): eui64 = mac2eui64(self.get_mac(), prefix) prefixlen = prefix.split('/')[1] self.del_addr(f'{eui64}/{prefixlen}') def set_ipv6_forwarding(self, forwarding): """ Configure IPv6 interface-specific Host/Router behaviour. False: By default, Host behaviour is assumed. This means: 1. IsRouter flag is not set in Neighbour Advertisements. 2. If accept_ra is TRUE (default), transmit Router Solicitations. 3. If accept_ra is TRUE (default), accept Router Advertisements (and do autoconfiguration). 4. If accept_redirects is TRUE (default), accept Redirects. True: If local forwarding is enabled, Router behaviour is assumed. This means exactly the reverse from the above: 1. IsRouter flag is set in Neighbour Advertisements. 2. Router Solicitations are not sent unless accept_ra is 2. 3. Router Advertisements are ignored unless accept_ra is 2. 4. Redirects are ignored. """ tmp = self.get_interface('ipv6_forwarding') if tmp == forwarding: return None return self.set_interface('ipv6_forwarding', forwarding) def set_ipv6_dad_messages(self, dad): """ The amount of Duplicate Address Detection probes to send. Default: 1 """ tmp = self.get_interface('ipv6_dad_transmits') if tmp == dad: return None return self.set_interface('ipv6_dad_transmits', dad) def set_link_detect(self, link_filter): """ Configure kernel response in packets received on interfaces that are 'down' 0 - Allow packets to be received for the address on this interface even if interface is disabled or no carrier. 1 - Ignore packets received if interface associated with the incoming address is down. 2 - Ignore packets received if interface associated with the incoming address is down or has no carrier. Default value is 0. Note that some distributions enable it in startup scripts. Example: >>> from vyos.ifconfig import Interface >>> Interface('eth0').set_link_detect(1) """ tmp = self.get_interface('link_detect') if tmp == link_filter: return None return self.set_interface('link_detect', link_filter) def get_alias(self): """ Get interface alias name used by e.g. SNMP Example: >>> Interface('eth0').get_alias() 'interface description as set by user' """ return self.get_interface('alias') def set_alias(self, ifalias=''): """ Set interface alias name used by e.g. SNMP Example: >>> from vyos.ifconfig import Interface >>> Interface('eth0').set_alias('VyOS upstream interface') to clear alias e.g. delete it use: >>> Interface('eth0').set_ifalias('') """ tmp = self.get_interface('alias') if tmp == ifalias: return None self.set_interface('alias', ifalias) def get_admin_state(self): """ Get interface administrative state. Function will return 'up' or 'down' Example: >>> from vyos.ifconfig import Interface >>> Interface('eth0').get_admin_state() 'up' """ return self.get_interface('admin_state') def set_admin_state(self, state): """ Set interface administrative state to be 'up' or 'down' Example: >>> from vyos.ifconfig import Interface >>> Interface('eth0').set_admin_state('down') >>> Interface('eth0').get_admin_state() 'down' """ if state == 'up': self._admin_state_down_cnt -= 1 if self._admin_state_down_cnt < 1: return self.set_interface('admin_state', state) else: self._admin_state_down_cnt += 1 return self.set_interface('admin_state', state) def set_path_cost(self, cost): """ Set interface path cost, only relevant for STP enabled interfaces Example: >>> from vyos.ifconfig import Interface >>> Interface('eth0').set_path_cost(4) """ self.set_interface('path_cost', cost) def set_path_priority(self, priority): """ Set interface path priority, only relevant for STP enabled interfaces Example: >>> from vyos.ifconfig import Interface >>> Interface('eth0').set_path_priority(4) """ self.set_interface('path_priority', priority) def set_port_isolation(self, on_or_off): """ Controls whether a given port will be isolated, which means it will be able to communicate with non-isolated ports only. By default this flag is off. Use enable=1 to enable or enable=0 to disable Example: >>> from vyos.ifconfig import Interface >>> Interface('eth1').set_port_isolation('on') """ self.set_interface('bridge_port_isolation', on_or_off) def set_proxy_arp(self, enable): """ Set per interface proxy ARP configuration Example: >>> from vyos.ifconfig import Interface >>> Interface('eth0').set_proxy_arp(1) """ tmp = self.get_interface('proxy_arp') if tmp == enable: return None self.set_interface('proxy_arp', enable) def set_proxy_arp_pvlan(self, enable): """ Private VLAN proxy arp. Basically allow proxy arp replies back to the same interface (from which the ARP request/solicitation was received). This is done to support (ethernet) switch features, like RFC 3069, where the individual ports are NOT allowed to communicate with each other, but they are allowed to talk to the upstream router. As described in RFC 3069, it is possible to allow these hosts to communicate through the upstream router by proxy_arp'ing. Don't need to be used together with proxy_arp. This technology is known by different names: In RFC 3069 it is called VLAN Aggregation. Cisco and Allied Telesyn call it Private VLAN. Hewlett-Packard call it Source-Port filtering or port-isolation. Ericsson call it MAC-Forced Forwarding (RFC Draft). Example: >>> from vyos.ifconfig import Interface >>> Interface('eth0').set_proxy_arp_pvlan(1) """ tmp = self.get_interface('proxy_arp_pvlan') if tmp == enable: return None self.set_interface('proxy_arp_pvlan', enable) def get_addr_v4(self): """ Retrieve assigned IPv4 addresses from given interface. This is done using the netifaces and ipaddress python modules. Example: >>> from vyos.ifconfig import Interface >>> Interface('eth0').get_addr_v4() ['172.16.33.30/24'] """ ipv4 = [] if AF_INET in ifaddresses(self.config['ifname']): for v4_addr in ifaddresses(self.config['ifname'])[AF_INET]: # we need to manually assemble a list of IPv4 address/prefix prefix = '/' + \ str(IPv4Network('0.0.0.0/' + v4_addr['netmask']).prefixlen) ipv4.append(v4_addr['addr'] + prefix) return ipv4 def get_addr_v6(self): """ Retrieve assigned IPv6 addresses from given interface. This is done using the netifaces and ipaddress python modules. Example: >>> from vyos.ifconfig import Interface >>> Interface('eth0').get_addr_v6() ['fe80::20c:29ff:fe11:a174/64'] """ ipv6 = [] if AF_INET6 in ifaddresses(self.config['ifname']): for v6_addr in ifaddresses(self.config['ifname'])[AF_INET6]: # Note that currently expanded netmasks are not supported. That means # 2001:db00::0/24 is a valid argument while 2001:db00::0/ffff:ff00:: not. # see https://docs.python.org/3/library/ipaddress.html bits = bin( int(v6_addr['netmask'].replace(':', ''), 16)).count('1') prefix = '/' + str(bits) # we alsoneed to remove the interface suffix on link local # addresses v6_addr['addr'] = v6_addr['addr'].split('%')[0] ipv6.append(v6_addr['addr'] + prefix) return ipv6 def get_addr(self): """ Retrieve assigned IPv4 and IPv6 addresses from given interface. Example: >>> from vyos.ifconfig import Interface >>> Interface('eth0').get_addr() ['172.16.33.30/24', 'fe80::20c:29ff:fe11:a174/64'] """ return self.get_addr_v4() + self.get_addr_v6() def add_addr(self, addr): """ Add IP(v6) address to interface. Address is only added if it is not already assigned to that interface. Address format must be validated and compressed/normalized before calling this function. addr: can be an IPv4 address, IPv6 address, dhcp or dhcpv6! IPv4: add IPv4 address to interface IPv6: add IPv6 address to interface dhcp: start dhclient (IPv4) on interface dhcpv6: start WIDE DHCPv6 (IPv6) on interface Returns False if address is already assigned and wasn't re-added. Example: >>> from vyos.ifconfig import Interface >>> j = Interface('eth0') >>> j.add_addr('192.0.2.1/24') >>> j.add_addr('2001:db8::ffff/64') >>> j.get_addr() ['192.0.2.1/24', '2001:db8::ffff/64'] """ # XXX: normalize/compress with ipaddress if calling functions don't? # is subnet mask always passed, and in the same way? # do not add same address twice if addr in self._addr: return False addr_is_v4 = is_ipv4(addr) # we can't have both DHCP and static IPv4 addresses assigned for a in self._addr: if ( ( addr == 'dhcp' and a != 'dhcpv6' and is_ipv4(a) ) or ( a == 'dhcp' and addr != 'dhcpv6' and addr_is_v4 ) ): raise ConfigError(( "Can't configure both static IPv4 and DHCP address " "on the same interface")) # Failsave - do not add IPv6 address if IPv6 is disabled if is_ipv6(addr) and not is_ipv6_enabled(): return False # add to interface if addr == 'dhcp': self.set_dhcp(True) elif addr == 'dhcpv6': self.set_dhcpv6(True) elif not is_intf_addr_assigned(self.ifname, addr): self._cmd(f'ip addr add "{addr}" ' f'{"brd + " if addr_is_v4 else ""}dev "{self.ifname}"') else: return False # add to cache self._addr.append(addr) return True def del_addr(self, addr): """ Delete IP(v6) address from interface. Address is only deleted if it is assigned to that interface. Address format must be exactly the same as was used when adding the address. addr: can be an IPv4 address, IPv6 address, dhcp or dhcpv6! IPv4: delete IPv4 address from interface IPv6: delete IPv6 address from interface dhcp: stop dhclient (IPv4) on interface dhcpv6: stop dhclient (IPv6) on interface Returns False if address isn't already assigned and wasn't deleted. Example: >>> from vyos.ifconfig import Interface >>> j = Interface('eth0') >>> j.add_addr('2001:db8::ffff/64') >>> j.add_addr('192.0.2.1/24') >>> j.get_addr() ['192.0.2.1/24', '2001:db8::ffff/64'] >>> j.del_addr('192.0.2.1/24') >>> j.get_addr() ['2001:db8::ffff/64'] """ if not addr: raise ValueError() # remove from interface if addr == 'dhcp': self.set_dhcp(False) elif addr == 'dhcpv6': self.set_dhcpv6(False) elif is_intf_addr_assigned(self.ifname, addr): self._cmd(f'ip addr del "{addr}" dev "{self.ifname}"') else: return False # remove from cache if addr in self._addr: self._addr.remove(addr) return True def flush_addrs(self): """ Flush all addresses from an interface, including DHCP. Will raise an exception on error. """ # stop DHCP(v6) if running self.set_dhcp(False) self.set_dhcpv6(False) # flush all addresses self._cmd(f'ip addr flush dev "{self.ifname}"') def add_to_bridge(self, bridge_dict): """ Adds the interface to the bridge with the passed port config. Returns False if bridge doesn't exist. """ # drop all interface addresses first self.flush_addrs() ifname = self.ifname for bridge, bridge_config in bridge_dict.items(): # add interface to bridge - use Section.klass to get BridgeIf class Section.klass(bridge)(bridge, create=True).add_port(self.ifname) # set bridge port path cost if 'cost' in bridge_config: self.set_path_cost(bridge_config['cost']) # set bridge port path priority if 'priority' in bridge_config: self.set_path_cost(bridge_config['priority']) bridge_vlan_filter = Section.klass(bridge)(bridge, create=True).get_vlan_filter() if int(bridge_vlan_filter): cur_vlan_ids = get_vlan_ids(ifname) add_vlan = [] native_vlan_id = None allowed_vlan_ids= [] if 'native_vlan' in bridge_config: vlan_id = bridge_config['native_vlan'] add_vlan.append(vlan_id) native_vlan_id = vlan_id if 'allowed_vlan' in bridge_config: for vlan in bridge_config['allowed_vlan']: vlan_range = vlan.split('-') if len(vlan_range) == 2: for vlan_add in range(int(vlan_range[0]),int(vlan_range[1]) + 1): add_vlan.append(str(vlan_add)) allowed_vlan_ids.append(str(vlan_add)) else: add_vlan.append(vlan) allowed_vlan_ids.append(vlan) # Remove redundant VLANs from the system for vlan in list_diff(cur_vlan_ids, add_vlan): cmd = f'bridge vlan del dev {ifname} vid {vlan} master' self._cmd(cmd) for vlan in allowed_vlan_ids: cmd = f'bridge vlan add dev {ifname} vid {vlan} master' self._cmd(cmd) # Setting native VLAN to system if native_vlan_id: cmd = f'bridge vlan add dev {ifname} vid {native_vlan_id} pvid untagged master' self._cmd(cmd) def set_dhcp(self, enable): """ Enable/Disable DHCP client on a given interface. """ if enable not in [True, False]: raise ValueError() ifname = self.ifname config_base = r'/var/lib/dhcp/dhclient' config_file = f'{config_base}_{ifname}.conf' options_file = f'{config_base}_{ifname}.options' pid_file = f'{config_base}_{ifname}.pid' lease_file = f'{config_base}_{ifname}.leases' systemd_service = f'dhclient@{ifname}.service' # 'up' check is mandatory b/c even if the interface is A/D, as soon as # the DHCP client is started the interface will be placed in u/u state. # This is not what we intended to do when disabling an interface. if enable and 'disable' not in self._config: if dict_search('dhcp_options.host_name', self._config) == None: # read configured system hostname. # maybe change to vyos hostd client ??? hostname = 'vyos' with open('/etc/hostname', 'r') as f: hostname = f.read().rstrip('\n') tmp = {'dhcp_options' : { 'host_name' : hostname}} self._config = dict_merge(tmp, self._config) render(options_file, 'dhcp-client/daemon-options.tmpl', self._config) render(config_file, 'dhcp-client/ipv4.tmpl', self._config) # When the DHCP client is restarted a brief outage will occur, as # the old lease is released a new one is acquired (T4203). We will # only restart DHCP client if it's option changed, or if it's not # running, but it should be running (e.g. on system startup) if 'dhcp_options_old' in self._config or not is_systemd_service_active(systemd_service): return self._cmd(f'systemctl restart {systemd_service}') return None else: if is_systemd_service_active(systemd_service): self._cmd(f'systemctl stop {systemd_service}') # cleanup old config files for file in [config_file, options_file, pid_file, lease_file]: if os.path.isfile(file): os.remove(file) def set_dhcpv6(self, enable): """ Enable/Disable DHCPv6 client on a given interface. """ if enable not in [True, False]: raise ValueError() ifname = self.ifname config_file = f'/run/dhcp6c/dhcp6c.{ifname}.conf' systemd_service = f'dhcp6c@{ifname}.service' if enable and 'disable' not in self._config: render(config_file, 'dhcp-client/ipv6.tmpl', self._config) # We must ignore any return codes. This is required to enable # DHCPv6-PD for interfaces which are yet not up and running. return self._popen(f'systemctl restart {systemd_service}') else: if is_systemd_service_active(systemd_service): self._cmd(f'systemctl stop {systemd_service}') if os.path.isfile(config_file): os.remove(config_file) def set_mirror(self): # Please refer to the document for details # - https://man7.org/linux/man-pages/man8/tc.8.html # - https://man7.org/linux/man-pages/man8/tc-mirred.8.html # Depening if we are the source or the target interface of the port # mirror we need to setup some variables. source_if = self._config['ifname'] config = self._config.get('mirror', None) if 'is_mirror_intf' in self._config: source_if = next(iter(self._config['is_mirror_intf'])) config = self._config['is_mirror_intf'][source_if].get('mirror', None) # Check configuration stored by old perl code before delete T3782 if not 'redirect' in self._config: # Please do not clear the 'set $? = 0 '. It's meant to force a return of 0 # Remove existing mirroring rules delete_tc_cmd = f'tc qdisc del dev {source_if} handle ffff: ingress 2> /dev/null;' delete_tc_cmd += f'tc qdisc del dev {source_if} handle 1: root prio 2> /dev/null;' delete_tc_cmd += 'set $?=0' self._popen(delete_tc_cmd) # Bail out early if nothing needs to be configured if not config: return for direction, mirror_if in config.items(): if mirror_if not in interfaces(): continue if direction == 'ingress': handle = 'ffff: ingress' parent = 'ffff:' elif direction == 'egress': handle = '1: root prio' parent = '1:' # Mirror egress traffic mirror_cmd = f'tc qdisc add dev {source_if} handle {handle}; ' # Export the mirrored traffic to the interface mirror_cmd += f'tc filter add dev {source_if} parent {parent} protocol all prio 10 u32 match u32 0 0 flowid 1:1 action mirred egress mirror dev {mirror_if}' self._popen(mirror_cmd) def update(self, config): """ General helper function which works on a dictionary retrived by get_config_dict(). It's main intention is to consolidate the scattered interface setup code and provide a single point of entry when workin on any interface. """ if self.debug: import pprint pprint.pprint(config) # Cache the configuration - it will be reused inside e.g. DHCP handler # XXX: maybe pass the option via __init__ in the future and rename this # method to apply()? self._config = config # Change interface MAC address - re-set to real hardware address (hw-id) # if custom mac is removed. Skip if bond member. if 'is_bond_member' not in config: mac = config.get('hw_id') if 'mac' in config: mac = config.get('mac') if mac: self.set_mac(mac) # Update interface description self.set_alias(config.get('description', '')) # Ignore link state changes value = '2' if 'disable_link_detect' in config else '1' self.set_link_detect(value) # Configure assigned interface IP addresses. No longer # configured addresses will be removed first new_addr = config.get('address', []) # always ensure DHCP client is stopped (when not configured explicitly) if 'dhcp' not in new_addr: self.del_addr('dhcp') # always ensure DHCPv6 client is stopped (when not configured as client # for IPv6 address or prefix delegation) dhcpv6pd = dict_search('dhcpv6_options.pd', config) dhcpv6pd = dhcpv6pd != None and len(dhcpv6pd) != 0 if 'dhcpv6' not in new_addr and not dhcpv6pd: self.del_addr('dhcpv6') # determine IP addresses which are assigned to the interface and build a # list of addresses which are no longer in the dict so they can be removed if 'address_old' in config: for addr in list_diff(config['address_old'], new_addr): # we will delete all interface specific IP addresses if they are not # explicitly configured on the CLI if is_ipv6_link_local(addr): eui64 = mac2eui64(self.get_mac(), 'fe80::/64') if addr != f'{eui64}/64': self.del_addr(addr) else: self.del_addr(addr) # start DHCPv6 client when only PD was configured if dhcpv6pd: self.set_dhcpv6(True) # XXX: Bind interface to given VRF or unbind it if vrf is not set. Unbinding # will call 'ip link set dev eth0 nomaster' which will also drop the # interface out of any bridge or bond - thus this is checked before. if 'is_bond_member' in config: bond_if = next(iter(config['is_bond_member'])) tmp = get_interface_config(config['ifname']) if 'master' in tmp and tmp['master'] != bond_if: self.set_vrf('') elif 'is_bridge_member' in config: bridge_if = next(iter(config['is_bridge_member'])) tmp = get_interface_config(config['ifname']) if 'master' in tmp and tmp['master'] != bridge_if: self.set_vrf('') else: self.set_vrf(config.get('vrf', '')) # Add this section after vrf T4331 for addr in new_addr: self.add_addr(addr) # Configure ARP cache timeout in milliseconds - has default value tmp = dict_search('ip.arp_cache_timeout', config) value = tmp if (tmp != None) else '30' self.set_arp_cache_tmo(value) # Configure ARP filter configuration tmp = dict_search('ip.disable_arp_filter', config) value = '0' if (tmp != None) else '1' self.set_arp_filter(value) # Configure ARP accept tmp = dict_search('ip.enable_arp_accept', config) value = '1' if (tmp != None) else '0' self.set_arp_accept(value) # Configure ARP announce tmp = dict_search('ip.enable_arp_announce', config) value = '1' if (tmp != None) else '0' self.set_arp_announce(value) # Configure ARP ignore tmp = dict_search('ip.enable_arp_ignore', config) value = '1' if (tmp != None) else '0' self.set_arp_ignore(value) # Enable proxy-arp on this interface tmp = dict_search('ip.enable_proxy_arp', config) value = '1' if (tmp != None) else '0' self.set_proxy_arp(value) # Enable private VLAN proxy ARP on this interface tmp = dict_search('ip.proxy_arp_pvlan', config) value = '1' if (tmp != None) else '0' self.set_proxy_arp_pvlan(value) # IPv4 forwarding tmp = dict_search('ip.disable_forwarding', config) value = '0' if (tmp != None) else '1' self.set_ipv4_forwarding(value) # IPv4 source-validation tmp = dict_search('ip.source_validation', config) value = tmp if (tmp != None) else '0' self.set_ipv4_source_validation(value) # MTU - Maximum Transfer Unit has a default value. It must ALWAYS be set # before mangling any IPv6 option. If MTU is less then 1280 IPv6 will be # automatically disabled by the kernel. Also MTU must be increased before # configuring any IPv6 address on the interface. if 'mtu' in config and dict_search('dhcp_options.mtu', config) == None: self.set_mtu(config.get('mtu')) # Only change IPv6 parameters if IPv6 was not explicitly disabled if is_ipv6_enabled(): # IPv6 forwarding tmp = dict_search('ipv6.disable_forwarding', config) value = '0' if (tmp != None) else '1' self.set_ipv6_forwarding(value) # IPv6 router advertisements tmp = dict_search('ipv6.address.autoconf', config) value = '2' if (tmp != None) else '1' if 'dhcpv6' in new_addr: value = '2' self.set_ipv6_accept_ra(value) # IPv6 address autoconfiguration tmp = dict_search('ipv6.address.autoconf', config) value = '1' if (tmp != None) else '0' self.set_ipv6_autoconf(value) # IPv6 Duplicate Address Detection (DAD) tries tmp = dict_search('ipv6.dup_addr_detect_transmits', config) value = tmp if (tmp != None) else '1' self.set_ipv6_dad_messages(value) # Delete old IPv6 EUI64 addresses before changing MAC for addr in (dict_search('ipv6.address.eui64_old', config) or []): self.del_ipv6_eui64_address(addr) # Manage IPv6 link-local addresses if dict_search('ipv6.address.no_default_link_local', config) != None: self.del_ipv6_eui64_address('fe80::/64') else: self.add_ipv6_eui64_address('fe80::/64') # Add IPv6 EUI-based addresses tmp = dict_search('ipv6.address.eui64', config) if tmp: for addr in tmp: self.add_ipv6_eui64_address(addr) # re-add ourselves to any bridge we might have fallen out of if 'is_bridge_member' in config: tmp = config.get('is_bridge_member') self.add_to_bridge(tmp) # configure port mirror self.set_mirror() # Enable/Disable of an interface must always be done at the end of the # derived class to make use of the ref-counting set_admin_state() # function. We will only enable the interface if 'up' was called as # often as 'down'. This is required by some interface implementations # as certain parameters can only be changed when the interface is # in admin-down state. This ensures the link does not flap during # reconfiguration. state = 'down' if 'disable' in config else 'up' self.set_admin_state(state) # remove no longer required 802.1ad (Q-in-Q VLANs) ifname = config['ifname'] for vif_s_id in config.get('vif_s_remove', {}): vif_s_ifname = f'{ifname}.{vif_s_id}' VLANIf(vif_s_ifname).remove() # create/update 802.1ad (Q-in-Q VLANs) for vif_s_id, vif_s_config in config.get('vif_s', {}).items(): tmp = deepcopy(VLANIf.get_config()) tmp['protocol'] = vif_s_config['protocol'] tmp['source_interface'] = ifname tmp['vlan_id'] = vif_s_id vif_s_ifname = f'{ifname}.{vif_s_id}' vif_s_config['ifname'] = vif_s_ifname # It is not possible to change the VLAN encapsulation protocol # "on-the-fly". For this "quirk" we need to actively delete and # re-create the VIF-S interface. if self.exists(vif_s_ifname): cur_cfg = get_interface_config(vif_s_ifname) protocol = dict_search('linkinfo.info_data.protocol', cur_cfg).lower() if protocol != vif_s_config['protocol']: VLANIf(vif_s_ifname).remove() s_vlan = VLANIf(vif_s_ifname, **tmp) s_vlan.update(vif_s_config) # remove no longer required client VLAN (vif-c) for vif_c_id in vif_s_config.get('vif_c_remove', {}): vif_c_ifname = f'{vif_s_ifname}.{vif_c_id}' VLANIf(vif_c_ifname).remove() # create/update client VLAN (vif-c) interface for vif_c_id, vif_c_config in vif_s_config.get('vif_c', {}).items(): tmp = deepcopy(VLANIf.get_config()) tmp['source_interface'] = vif_s_ifname tmp['vlan_id'] = vif_c_id vif_c_ifname = f'{vif_s_ifname}.{vif_c_id}' vif_c_config['ifname'] = vif_c_ifname c_vlan = VLANIf(vif_c_ifname, **tmp) c_vlan.update(vif_c_config) # remove no longer required 802.1q VLAN interfaces for vif_id in config.get('vif_remove', {}): vif_ifname = f'{ifname}.{vif_id}' VLANIf(vif_ifname).remove() # create/update 802.1q VLAN interfaces for vif_id, vif_config in config.get('vif', {}).items(): vif_ifname = f'{ifname}.{vif_id}' vif_config['ifname'] = vif_ifname tmp = deepcopy(VLANIf.get_config()) tmp['source_interface'] = ifname tmp['vlan_id'] = vif_id # We need to ensure that the string format is consistent, and we need to exclude redundant spaces. sep = ' ' if 'egress_qos' in vif_config: # Unwrap strings into arrays egress_qos_array = vif_config['egress_qos'].split() # The split array is spliced according to the fixed format tmp['egress_qos'] = sep.join(egress_qos_array) if 'ingress_qos' in vif_config: # Unwrap strings into arrays ingress_qos_array = vif_config['ingress_qos'].split() # The split array is spliced according to the fixed format tmp['ingress_qos'] = sep.join(ingress_qos_array) # Since setting the QoS control parameters in the later stage will # not completely delete the old settings, # we still need to delete the VLAN encapsulation interface in order to # ensure that the changed settings are effective. cur_cfg = get_interface_config(vif_ifname) qos_str = '' tmp2 = dict_search('linkinfo.info_data.ingress_qos', cur_cfg) if 'ingress_qos' in tmp and tmp2: for item in tmp2: from_key = item['from'] to_key = item['to'] qos_str += f'{from_key}:{to_key} ' if qos_str != tmp['ingress_qos']: if self.exists(vif_ifname): VLANIf(vif_ifname).remove() qos_str = '' tmp2 = dict_search('linkinfo.info_data.egress_qos', cur_cfg) if 'egress_qos' in tmp and tmp2: for item in tmp2: from_key = item['from'] to_key = item['to'] qos_str += f'{from_key}:{to_key} ' if qos_str != tmp['egress_qos']: if self.exists(vif_ifname): VLANIf(vif_ifname).remove() vlan = VLANIf(vif_ifname, **tmp) vlan.update(vif_config) class VLANIf(Interface): """ Specific class which abstracts 802.1q and 802.1ad (Q-in-Q) VLAN interfaces """ iftype = 'vlan' def _create(self): # bail out early if interface already exists if self.exists(f'{self.ifname}'): return cmd = 'ip link add link {source_interface} name {ifname} type vlan id {vlan_id}' if 'protocol' in self.config: cmd += ' protocol {protocol}' if 'ingress_qos' in self.config: cmd += ' ingress-qos-map {ingress_qos}' if 'egress_qos' in self.config: cmd += ' egress-qos-map {egress_qos}' self._cmd(cmd.format(**self.config)) # interface is always A/D down. It needs to be enabled explicitly self.set_admin_state('down') def set_admin_state(self, state): """ Set interface administrative state to be 'up' or 'down' Example: >>> from vyos.ifconfig import Interface >>> Interface('eth0.10').set_admin_state('down') >>> Interface('eth0.10').get_admin_state() 'down' """ # A VLAN interface can only be placed in admin up state when # the lower interface is up, too lower_interface = glob(f'/sys/class/net/{self.ifname}/lower*/flags')[0] with open(lower_interface, 'r') as f: flags = f.read() # If parent is not up - bail out as we can not bring up the VLAN. # Flags are defined in kernel source include/uapi/linux/if.h if not int(flags, 16) & 1: return None return super().set_admin_state(state) def set_mirror(self): return