diff options
| -rwxr-xr-x | setup.py | 2 | ||||
| -rw-r--r-- | sysvinit/suse/cloud-config | 113 | ||||
| -rw-r--r-- | sysvinit/suse/cloud-final | 113 | ||||
| -rw-r--r-- | sysvinit/suse/cloud-init | 114 | ||||
| -rw-r--r-- | sysvinit/suse/cloud-init-local | 113 |
5 files changed, 455 insertions, 0 deletions
@@ -121,6 +121,7 @@ INITSYS_FILES = { 'sysvinit_freebsd': [f for f in glob('sysvinit/freebsd/*') if is_f(f)], 'sysvinit_deb': [f for f in glob('sysvinit/debian/*') if is_f(f)], 'sysvinit_openrc': [f for f in glob('sysvinit/gentoo/*') if is_f(f)], + 'sysvinit_suse': [f for f in glob('sysvinit/suse/*') if is_f(f)], 'systemd': [render_tmpl(f) for f in (glob('systemd/*.tmpl') + glob('systemd/*.service') + @@ -133,6 +134,7 @@ INITSYS_ROOTS = { 'sysvinit_freebsd': 'usr/local/etc/rc.d', 'sysvinit_deb': 'etc/init.d', 'sysvinit_openrc': 'etc/init.d', + 'sysvinit_suse': 'etc/init.d', 'systemd': pkg_config_read('systemd', 'systemdsystemunitdir'), 'systemd.generators': pkg_config_read('systemd', 'systemdsystemgeneratordir'), diff --git a/sysvinit/suse/cloud-config b/sysvinit/suse/cloud-config new file mode 100644 index 00000000..75b81512 --- /dev/null +++ b/sysvinit/suse/cloud-config @@ -0,0 +1,113 @@ +#!/bin/sh +# Copyright (C) 2012 Yahoo! Inc. +# +# Author: Joshua Harlow <harlowja@yahoo-inc.com> +# +# This file is part of cloud-init. See LICENSE file for license information. + +# See: http://wiki.debian.org/LSBInitScripts +# See: http://tiny.cc/czvbgw +# See: http://www.novell.com/coolsolutions/feature/15380.html +# Also based on dhcpd in RHEL (for comparison) + +### BEGIN INIT INFO +# Provides: cloud-config +# Required-Start: cloud-init cloud-init-local +# Should-Start: $time +# Required-Stop: $null +# Should-Stop: $null +# Default-Start: 2 3 5 +# Default-Stop: 0 1 6 +# Short-Description: The config cloud-init job +# Description: Start cloud-init and runs the config phase +# and any associated config modules as desired. +### END INIT INFO + +# Return values acc. to LSB for all commands but status: +# 0 - success +# 1 - generic or unspecified error +# 2 - invalid or excess argument(s) +# 3 - unimplemented feature (e.g. "reload") +# 4 - user had insufficient privileges +# 5 - program is not installed +# 6 - program is not configured +# 7 - program is not running +# 8--199 - reserved (8--99 LSB, 100--149 distrib, 150--199 appl) +# +# Note that starting an already running service, stopping +# or restarting a not-running service as well as the restart +# with force-reload (in case signaling is not supported) are +# considered a success. + +RETVAL=0 + +prog="cloud-init" +cloud_init="/usr/bin/cloud-init" +conf="/etc/cloud/cloud.cfg" + +# If there exist sysconfig/default variable override files use it... +[ -f /etc/sysconfig/cloud-init ] && . /etc/sysconfig/cloud-init +[ -f /etc/default/cloud-init ] && . /etc/default/cloud-init + +. /etc/rc.status +rc_reset + +start() { + [ -x $cloud_init ] || return 5 + [ -f $conf ] || return 6 + + echo -n $"Starting $prog: " + $cloud_init $CLOUDINITARGS modules --mode config + RETVAL=$? + return $RETVAL +} + +stop() { + echo -n $"Shutting down $prog: " + # No-op + RETVAL=7 + return $RETVAL +} + +case "$1" in + start) + start + RETVAL=$? + ;; + stop) + stop + RETVAL=$? + ;; + restart|try-restart|condrestart) + ## Stop the service and regardless of whether it was + ## running or not, start it again. + # + ## Note: try-restart is now part of LSB (as of 1.9). + ## RH has a similar command named condrestart. + start + RETVAL=$? + ;; + reload|force-reload) + # It does not support reload + RETVAL=3 + ;; + status) + echo -n $"Checking for service $prog:" + # Return value is slightly different for the status command: + # 0 - service up and running + # 1 - service dead, but /var/run/ pid file exists + # 2 - service dead, but /var/lock/ lock file exists + # 3 - service not running (unused) + # 4 - service status unknown :-( + # 5--199 reserved (5--99 LSB, 100--149 distro, 150--199 appl.) + RETVAL=3 + ;; + *) + echo "Usage: $0 {start|stop|status|try-restart|condrestart|restart|force-reload|reload}" + RETVAL=3 + ;; +esac + +_rc_status=$RETVAL +rc_status -v +rc_exit diff --git a/sysvinit/suse/cloud-final b/sysvinit/suse/cloud-final new file mode 100644 index 00000000..25586e1e --- /dev/null +++ b/sysvinit/suse/cloud-final @@ -0,0 +1,113 @@ +#!/bin/sh +# Copyright (C) 2012 Yahoo! Inc. +# +# Author: Joshua Harlow <harlowja@yahoo-inc.com> +# +# This file is part of cloud-init. See LICENSE file for license information. + +# See: http://wiki.debian.org/LSBInitScripts +# See: http://tiny.cc/czvbgw +# See: http://www.novell.com/coolsolutions/feature/15380.html +# Also based on dhcpd in RHEL (for comparison) + +### BEGIN INIT INFO +# Provides: cloud-final +# Required-Start: cloud-config +# Should-Start: $time +# Required-Stop: $null +# Should-Stop: $null +# Default-Start: 2 3 5 +# Default-Stop: 0 1 6 +# Short-Description: The final cloud-init job +# Description: Start cloud-init and runs the final phase +# and any associated final modules as desired. +### END INIT INFO + +# Return values acc. to LSB for all commands but status: +# 0 - success +# 1 - generic or unspecified error +# 2 - invalid or excess argument(s) +# 3 - unimplemented feature (e.g. "reload") +# 4 - user had insufficient privileges +# 5 - program is not installed +# 6 - program is not configured +# 7 - program is not running +# 8--199 - reserved (8--99 LSB, 100--149 distrib, 150--199 appl) +# +# Note that starting an already running service, stopping +# or restarting a not-running service as well as the restart +# with force-reload (in case signaling is not supported) are +# considered a success. + +RETVAL=0 + +prog="cloud-init" +cloud_init="/usr/bin/cloud-init" +conf="/etc/cloud/cloud.cfg" + +# If there exist sysconfig/default variable override files use it... +[ -f /etc/sysconfig/cloud-init ] && . /etc/sysconfig/cloud-init +[ -f /etc/default/cloud-init ] && . /etc/default/cloud-init + +. /etc/rc.status +rc_reset + +start() { + [ -x $cloud_init ] || return 5 + [ -f $conf ] || return 6 + + echo -n $"Starting $prog: " + $cloud_init $CLOUDINITARGS modules --mode final + RETVAL=$? + return $RETVAL +} + +stop() { + echo -n $"Shutting down $prog: " + # No-op + RETVAL=7 + return $RETVAL +} + +case "$1" in + start) + start + RETVAL=$? + ;; + stop) + stop + RETVAL=$? + ;; + restart|try-restart|condrestart) + ## Stop the service and regardless of whether it was + ## running or not, start it again. + # + ## Note: try-restart is now part of LSB (as of 1.9). + ## RH has a similar command named condrestart. + start + RETVAL=$? + ;; + reload|force-reload) + # It does not support reload + RETVAL=3 + ;; + status) + echo -n $"Checking for service $prog:" + # Return value is slightly different for the status command: + # 0 - service up and running + # 1 - service dead, but /var/run/ pid file exists + # 2 - service dead, but /var/lock/ lock file exists + # 3 - service not running (unused) + # 4 - service status unknown :-( + # 5--199 reserved (5--99 LSB, 100--149 distro, 150--199 appl.) + RETVAL=3 + ;; + *) + echo "Usage: $0 {start|stop|status|try-restart|condrestart|restart|force-reload|reload}" + RETVAL=3 + ;; +esac + +_rc_status=$RETVAL +rc_status -v +rc_exit diff --git a/sysvinit/suse/cloud-init b/sysvinit/suse/cloud-init new file mode 100644 index 00000000..67e8e6af --- /dev/null +++ b/sysvinit/suse/cloud-init @@ -0,0 +1,114 @@ +#!/bin/sh +# Copyright (C) 2012 Yahoo! Inc. +# +# Author: Joshua Harlow <harlowja@yahoo-inc.com> +# +# This file is part of cloud-init. See LICENSE file for license information. + +# See: http://wiki.debian.org/LSBInitScripts +# See: http://tiny.cc/czvbgw +# See: http://www.novell.com/coolsolutions/feature/15380.html +# Also based on dhcpd in RHEL (for comparison) + +### BEGIN INIT INFO +# Provides: cloud-init +# Required-Start: $local_fs $network $named $remote_fs cloud-init-local +# Should-Start: $time +# Required-Stop: $null +# Should-Stop: $null +# Default-Start: 2 3 5 +# Default-Stop: 0 1 6 +# Short-Description: The initial cloud-init job (net and fs contingent) +# Description: Start cloud-init and runs the initialization phase +# and any associated initial modules as desired. +### END INIT INFO + +# Return values acc. to LSB for all commands but status: +# 0 - success +# 1 - generic or unspecified error +# 2 - invalid or excess argument(s) +# 3 - unimplemented feature (e.g. "reload") +# 4 - user had insufficient privileges +# 5 - program is not installed +# 6 - program is not configured +# 7 - program is not running +# 8--199 - reserved (8--99 LSB, 100--149 distrib, 150--199 appl) +# +# Note that starting an already running service, stopping +# or restarting a not-running service as well as the restart +# with force-reload (in case signaling is not supported) are +# considered a success. + +RETVAL=0 + +prog="cloud-init" +cloud_init="/usr/bin/cloud-init" +conf="/etc/cloud/cloud.cfg" + +# If there exist sysconfig/default variable override files use it... +[ -f /etc/sysconfig/cloud-init ] && . /etc/sysconfig/cloud-init +[ -f /etc/default/cloud-init ] && . /etc/default/cloud-init + +. /etc/rc.status +rc_reset + +start() { + [ -x $cloud_init ] || return 5 + [ -f $conf ] || return 6 + + echo -n $"Starting $prog: " + $cloud_init $CLOUDINITARGS init + RETVAL=$? + return $RETVAL +} + +stop() { + echo -n $"Shutting down $prog: " + # No-op + RETVAL=7 + return $RETVAL +} + +case "$1" in + start) + start + RETVAL=$? + ;; + stop) + stop + RETVAL=$? + ;; + restart|try-restart|condrestart) + ## Stop the service and regardless of whether it was + ## running or not, start it again. + # + ## Note: try-restart is now part of LSB (as of 1.9). + ## RH has a similar command named condrestart. + start + RETVAL=$? + ;; + reload|force-reload) + # It does not support reload + RETVAL=3 + ;; + status) + echo -n $"Checking for service $prog:" + RETVAL=3 + [ -e /root/.ssh/authorized_keys ] && RETVAL=0 + # Return value is slightly different for the status command: + # 0 - service up and running + # 1 - service dead, but /var/run/ pid file exists + # 2 - service dead, but /var/lock/ lock file exists + # 3 - service not running (unused) + # 4 - service status unknown :-( + # 5--199 reserved (5--99 LSB, 100--149 distro, 150--199 appl.) + ;; + *) + echo "Usage: $0 {start|stop|status|try-restart|condrestart|restart|force-reload|reload}" + RETVAL=3 + ;; +esac + +_rc_status=$RETVAL +rc_status -v +rc_exit diff --git a/sysvinit/suse/cloud-init-local b/sysvinit/suse/cloud-init-local new file mode 100644 index 00000000..1370d980 --- /dev/null +++ b/sysvinit/suse/cloud-init-local @@ -0,0 +1,113 @@ +#!/bin/sh +# Copyright (C) 2012 Yahoo! Inc. +# +# Author: Joshua Harlow <harlowja@yahoo-inc.com> +# +# This file is part of cloud-init. See LICENSE file for license information. + +# See: http://wiki.debian.org/LSBInitScripts +# See: http://tiny.cc/czvbgw +# See: http://www.novell.com/coolsolutions/feature/15380.html +# Also based on dhcpd in RHEL (for comparison) + +### BEGIN INIT INFO +# Provides: cloud-init-local +# Required-Start: $local_fs $remote_fs +# Should-Start: $time +# Required-Stop: $null +# Should-Stop: $null +# Default-Start: 2 3 5 +# Default-Stop: 0 1 6 +# Short-Description: The initial cloud-init job (local fs contingent) +# Description: Start cloud-init and runs the initialization phases +# and any associated initial modules as desired. +### END INIT INFO + +# Return values acc. to LSB for all commands but status: +# 0 - success +# 1 - generic or unspecified error +# 2 - invalid or excess argument(s) +# 3 - unimplemented feature (e.g. "reload") +# 4 - user had insufficient privileges +# 5 - program is not installed +# 6 - program is not configured +# 7 - program is not running +# 8--199 - reserved (8--99 LSB, 100--149 distrib, 150--199 appl) +# +# Note that starting an already running service, stopping +# or restarting a not-running service as well as the restart +# with force-reload (in case signaling is not supported) are +# considered a success. + +RETVAL=0 + +prog="cloud-init" +cloud_init="/usr/bin/cloud-init" +conf="/etc/cloud/cloud.cfg" + +# If there exist sysconfig/default variable override files use it... +[ -f /etc/sysconfig/cloud-init ] && . /etc/sysconfig/cloud-init +[ -f /etc/default/cloud-init ] && . /etc/default/cloud-init + +. /etc/rc.status +rc_reset + +start() { + [ -x $cloud_init ] || return 5 + [ -f $conf ] || return 6 + + echo -n $"Starting $prog: " + $cloud_init $CLOUDINITARGS init --local + RETVAL=$? + return $RETVAL +} + +stop() { + echo -n $"Shutting down $prog: " + # No-op + RETVAL=7 + return $RETVAL +} + +case "$1" in + start) + start + RETVAL=$? + ;; + stop) + stop + RETVAL=$? + ;; + restart|try-restart|condrestart) + ## Stop the service and regardless of whether it was + ## running or not, start it again. + # + ## Note: try-restart is now part of LSB (as of 1.9). + ## RH has a similar command named condrestart. + start + RETVAL=$? + ;; + reload|force-reload) + # It does not support reload + RETVAL=3 + ;; + status) + echo -n $"Checking for service $prog:" + # Return value is slightly different for the status command: + # 0 - service up and running + # 1 - service dead, but /var/run/ pid file exists + # 2 - service dead, but /var/lock/ lock file exists + # 3 - service not running (unused) + # 4 - service status unknown :-( + # 5--199 reserved (5--99 LSB, 100--149 distro, 150--199 appl.) + RETVAL=3 + ;; + *) + echo "Usage: $0 {start|stop|status|try-restart|condrestart|restart|force-reload|reload}" + RETVAL=3 + ;; +esac + +_rc_status=$RETVAL +rc_status -v +rc_exit |