| Age | Commit message (Collapse) | Author |
|---|
|
Update sysconfig configuration to use BONDING_MODULES_OPTS instead of
BONDING_OPTS when on a SUSE system. The sysconfig support requires use
of BONDING_MODULE_OPTS whereas the initscript support that rhel uses
requires BONDING_OPTS.
|
|
|
|
When bringing up DHCP-provided static routes, we check for "0.0.0.0/0"
to indicate an unspecified gateway. However, when parsing the static
route in `parse_static_routes`, the gateway is never specified with
a net length, so the "/0" will never happen.
This change updates the gateway check to check only for "0.0.0.0".
|
|
|
|
This patch adds support to resize a single partition of a VM if it's using an
LVM underneath. The patch detects if it's LVM if the given block device
is a device mapper by its name (e.g. `/dev/dm-1`) and if it has slave
devices under it on sysfs. After that syspath is updated to the real
block device and growpart will be called to resize it (and automatically
its Physical Volume).
The Volume Group will be updated automatically and a final call to
extend the rootfs to the remaining space available will be made.
Using the same growpart configuration, the user can specify only one
device to be resized when using LVM and growpart, otherwise cloud-init
won't know which one should be resized and will fail.
rhbz: #1810878
LP: #1799953
Signed-off-by: Eduardo Otubo <otubo@redhat.com>
Signed-off-by: Scott Moser <smoser@brickies.net>
|
|
klibc initramfs in debian allows the 'iscsi_target_ip=' cmdline
parameter to specify an iscsi device attachment. This can
cause cloud-init to mis-detect the cmdline paramter as a
networking config.
LP: #1919188
|
|
When output of SSH host keys and/or SSH fingerprints are disabled for
all keys do not display headers and footers.
Prevent risk of message text being interpreted as "logger" option by
appending "--" to logger options.
Correct syslog output that was tagged with "ec2" regardless of DataSource
in use. Now use "cloud-init" tag instead.
Various "shellcheck" corrections.
Add testcase for disabled output of SSH host keys.
|
|
Ensure that the Azure helper's http handler sleeps a fixed duration
between retry failure attempts. The http handler will sleep a fixed
duration between failed attempts regardless of whether the attempt
failed due to (1) request timing out or (2) instant failure (no
timeout).
Due to certain platform issues, the http request to the Azure endpoint
may instantly fail without reaching the http timeout duration. Without
sleeping a fixed duration in between retry attempts, the http handler
will loop through the max retry attempts quickly. This causes the
communication between cloud-init and the Azure platform to be less
resilient due to the short total duration if there is no sleep in
between retries.
|
|
key is a property of source1 and not sources
|
|
|
|
Prior to this commit, when a user specified configuration which would
generate random passwords for users, cloud-init would cause those
passwords to be written to the serial console by emitting them on
stderr. In the default configuration, any stdout or stderr emitted by
cloud-init is also written to `/var/log/cloud-init-output.log`. This
file is world-readable, meaning that those randomly-generated passwords
were available to be read by any user with access to the system. This
presents an obvious security issue.
This commit responds to this issue in two ways:
* We address the direct issue by moving from writing the passwords to
sys.stderr to writing them directly to /dev/console (via
util.multi_log); this means that the passwords will never end up in
cloud-init-output.log
* To avoid future issues like this, we also modify the logging code so
that any files created in a log sink subprocess will only be
owner/group readable and, if it exists, will be owned by the adm
group. This results in `/var/log/cloud-init-output.log` no longer
being world-readable, meaning that if there are other parts of the
codebase that are emitting sensitive data intended for the serial
console, that data is no longer available to all users of the system.
LP: #1918303
|
|
The apt default test wasn't ported over from cloud-tests correctly.
uri should be specified in the test, but it was not, so the test
failed on openstack (and likely other platforms) because without
a specified uri, the default uri will vary by platform. I separated
this uri test out into a separate test function.
Also add openstack specific test for apt configuration with no uri.
Other platform-specific tests should be added here over time.
|
|
The latest pycloudlib now launches official Ubuntu cloud images for
xenial, meaning that `lxc exec` no longer works against them. This
commit includes handling for tests which are affected by this change;
further details and reasoning in the included comment.
|
|
The implementation in existing datasources means that vendordata_raw is
not "raw" as it ideally would be. Instead, actual values may include
bytes, string or list. If the value was a list, then the attempt to
persist that data to a file in '_store_rawdata' would raise a
TypeError.
The change is to encode with util.json_dumps (which is safe for
binary data) before writing.
|
|
The locale wasn't persisted correct nor set.
LP: #1402406
|
|
Newer verisons of /etc/sudoers prefer @includedir over
#includedir. Ensure we handle that properly and don't include an
additional #includedir when one isn't warranted.
|
|
This mounts the full directories that we install into systems over their
corresponding paths within the system under test, getting us slightly
closer to testing what a package would install.
|
|
#342 (70dbccbb) introduced the ability to determine route-metrics based on
the `device-number` provided by the EC2 IMDS. Not all datasources that
subclass EC2 will have this attribute, so allow the old behavior if
`device-number` is not present.
LP: #1917875
|
|
|
|
`get_interfaces` is used to in two ways, broadly: firstly, to determine
the available interfaces when converting cloud network configuration
formats to cloud-init's network configuration formats; and, secondly, to
ensure that any interfaces which are specified in network configuration
are (a) available, and (b) named correctly. The first of these is
unaffected by this commit, as no clouds support Open vSwitch
configuration in their network configuration formats.
For the second, we check that MAC addresses of physical devices are
unique. In some OVS configurations, there are OVS-created devices which
have duplicate MAC addresses, either with each other or with physical
devices. As these interfaces are created by OVS, we can be confident
that (a) they will be available when appropriate, and (b) that OVS will
name them correctly. As such, this commit excludes any OVS-internal
interfaces from the set of interfaces returned by `get_interfaces`.
LP: #1912844
|
|
This allows source'd OpenStack credentials to be used for tox tests.
|
|
|
|
Add flexibility to IMDS api-version by having both a desired IMDS
api-version and a minimum api-version. The desired api-version will
be used first, and if that fails it will fall back to the minimum
api-version.
|
|
* Xenial issue
The `apt-key finger` format changed since Xenial. Sample Xenial output:
pub 4096R/991BC93C 2018-09-17
Key fingerprint = F6EC B376 2474 EDA9 D21B 7022 8719 20D1 991B
Sample Focal output:
pub rsa4096 2016-04-12 [SC]
EB4C 1BFD 4F04 2F6D DDCC EC91 7721 F63B D38B 4796
What didn't change is the format of the key fingerprint, which should be
enough to ensure that the right key is in place across all the supported
releases.
* Hirsute issue
TestApt::test_ppa_source also fails on Hirsute because of a difference
in how the PPA keys are added. On Focla this command:
add-apt-repository ppa:simplestreams-dev/trunk
install /etc/apt/trusted.gpg.d/simplestreams-dev_ubuntu_trunk.gpg, while
on Hirsute the file is names simplestreams-dev-ubuntu-trunk.gpg. The
filename is part of the `apt-key finger` output, and this the test
fails. Only checking for the presence of the key fingerprint in apt-key
also covers this case.
LP: #1916629
|
|
|
|
hostname (inetutils) isn't installed per default on arch, so switch
to hostnamectl which is installed per default (systemd).
|
|
PR #811 added a new config key, emit_keys_to_console, but didn't update the
documentation for mention it.
|
|
It is distro dependent whether hostname or fqdn is used
|
|
Bump the version in cloudinit/version.py to 21.1 and
update ChangeLog.
LP: #1916540
|
|
Changes:
* Only merge in default Azure cloud ephemeral disk configs
during DataSourceAzure._get_data() if the ephemeral disk
exists.
* DataSourceAzure.address_ephemeral_resize() (which is
invoked in DataSourceAzure.activate() should only set up
the ephemeral disk if the disk exists.
Azure VMs may or may not come with ephemeral resource disks
depending on the VM SKU. For VM SKUs that come with
ephemeral resource disks, the Azure platform guarantees that
the ephemeral resource disk is attached to the VM before
the VM is booted. For VM SKUs that do not come with
ephemeral resource disks, cloud-init currently attempts
to wait and set up a non-existent ephemeral resource
disk, which wastes boot time. It also causes disk setup
modules to fail (due to non-existent references to the
ephemeral resource disk).
udevadm settle is invoked by cloud-init very early in boot.
udevadm settle is invoked very early, before
DataSourceAzure's _get_data() and activate() methods.
Within DataSourceAzure's _get_data() and activate() methods,
the ephemeral resource disk path should exist if the
VM SKU comes with an ephemeral resource disk.
The ephemeral resource disk path should not exist if the
VM SKU does not come with an ephemeral resource disk.
LP: #1901011
|
|
Specifically:
ssh:
emit_keys_to_console: false
We also port the cc_keys_to_console cloud tests to the new integration
testing framework, and add a test for this new option.
LP: #1915460
|
|
pycloudlib has modified the way LXD executes tests
(https://github.com/canonical/pycloudlib/pull/114): it will always use
SSH to access them by default, instead of using `lxc exec`. This
behaviour is transparent for them majority of cloud-init's integration
tests, but some currently depend on using `lxc exec` to access instances
with (intentionally) broken networking: obviously these are not
accessible via SSH.
pycloudlib retains support for switching an instance to use `lxc exec`.
This commit introduces the `lxd_use_exec` mark, which tests can use to
indicate to the integration testing framework that they should be so
switched, and applies it to all applicable tests.
|
|
Kernel's newer than 4.15 present /sys/dmi/id/product_uuid as a
lowercase value. Previously UUID was uppercase.
Azure datasource reads the product_uuid directly as their platform's
instance-id. This presents a problem if a kernel is either
upgraded or downgraded across the 4.15 kernel version boundary because
the case of the UUID will change, resulting in cloud-init seeing a
"new" instance id and re-running all modules.
Re-running cc_ssh in cloud-init deletes and regenerates ssh_host keys
on a system which can cause concern on long-running instances that
somethingnefarious has happened.
Also add:
- An integration test for this for Azure Bionic Ubuntu FIPS upgrading from
a FIPS kernel with uppercase UUID to a lowercase UUID in linux-azure
- A new pytest.mark.sru_next to collect all integration tests related to our
next SRU
LP: #1835584
|
|
Because they don't have the permissions to do it. Instead, reword the
message to ask people to ping mitechie, in line with the rest of the
message.
|
|
We need to allow the SSH_AUTH_SOCK environment variable through for
paramiko to be able to find the agent.
|
|
This allows out-of-date images to be brought up-to-date with the
archive, so that tests written against the latest cloud-init release
will pass.
|
|
Using the same MAC address results in strange test behaviour if more
than one such instance is up: traffic gets routed to an arbitrary
interface with the given MAC address. This can happen if running tests
in parallel, or on a system which retains test instances from previous
runs.
The introduction of tests/integration_tests/__init__.py means that
pylint now checks the integration tests: this commit also addresses
those failures.
|
|
|
|
|
|
Without a MAC address match clause, the test network configuration is
not applied to the primary interface in LXD VMs (which is named enp*s*
rather than eth0).
|
|
`test_seed_random_data.py` was failing on openstack as openstack
provides additional binary seed data to the end of the specified file.
The test has been changed to only read the ascii porition of
seed file.
|
|
|
|
New datasource utilizing UpCloud metadata API, including relevant unit
tests and documentation.
|
|
In LXD containers, the default interface is named eth0. In VMs, it
isn't; it's renamed by systemd (likely to enp5s0, but we can't rely on
that). This means that, on VMs, the network configuration we specify
for "eth0" doesn't match an interface in the system and so is not
applied.
This modifies the test to set a MAC address in a match clause in the
network configuration and on the eth0 interface (which is the LXD name
in both containers and VMs pre-rename): this ensures that the specified
configuration applies in both cases.
|
|
Add support for openstack's dynamic vendor data, which appears under openstack/latest/vendor_data2.json
This adds vendor_data2 to all pathways; it should be a no-op for non-OpenStack providers.
LP: #1841104
|
|
Since version 1.9.1, @includedir can be used in the sudoers files
instead of #includedir:
https://github.com/sudo-project/sudo/releases/tag/SUDO_1_9_1
Actually "@includedir" is the modern syntax, and "#includedir" the historic
syntax. It has been considered that "#includedir" was too puzzling because
it started with a "#" that otherwise denotes comments.
This happens to be the default in SUSE Linux enterprise sudoer package,
so cloudinit should take this into account.
Otherwise, cloudinit was adding an extra #includedir, which was
resulting on the files under /etc/sudoers.d being included twice, one by
@includedir from the SUSE package, one by the @includedir from
cloudinit. The consequence of this, was that if you were defining an
Cmnd_Alias inside any of those files, this was being defined twice and
creating an error when using sudo.
|
|
upstream/20.4.1 was used to release the 20.4.1 hotfix. Merging it into
master reconciles that fork in history, and integrates both the 20.4.1
changelog and tag into our main history.
|
|
If cloud-init is enabled on VMware platform, cloud-init will wait until
its configuration file is ready and currently the max wait is 90
seconds by default. With our test, this configuration file should be
ready within 1 second, so change it to 15 seconds for better
performance. Also update the documentation about how to change the
default value in cloud-init configuration file.
|
|
|
|
Signed-off-by: Jordi Massaguer Pla <jmassaguerpla@suse.de>
|
