| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
|
|
Previous commit f0747c4b4cf073273e11d383f0354257be7276ed relocated
normalize_users_groups to ug_util module, but missed modifying
the cc_users_groups config module. Apply the location change to fix.
|
|
|
|
|
|
|
|
The function exec_mkpart_gpt was simply not waiting for udev events
to flush after calling sgdisk. The corresponding function
exec_mkpart_mbr already did.
This should fix a transient failure where mkfs would fail with
'not a block device'.
LP: #1626243
|
|
Many of the unit tests in test_data would inadvertantly read the
system's /etc/cloud/cloud.cfg and /etc/cloud/cloud.cfg.d.
This was first noticed on a system deployed by MAAS, where
files in /etc/cloud/cloud.cfg.d/ are root read-only.
This changes those tests to actually make use of
FilesystemMockingTestCase functionality and adds 'reRoot()' to that
class which is easier to use for at least this use case.
LP: #1635350
|
|
Update the summary of rsyslog module and add logging.rst to docs.
|
|
Ubuntu Core images use the `snap create-user` to add users to an
Ubuntu Core system. Add support for creating snap users by adding
a key to the users dictionary.
users:
- name: bob
snapuser: bob@bobcom.io
Or via the 'snappy' dictionary:
snappy:
email: bob@bobcom.io
Users may also create a snap user without contacting the SSO by
providing a 'system-user' assertion by importing them into snapd.
Additionally, Ubuntu Core systems have a read-only /etc/passwd such that
the normal useradd/groupadd commands do not function without an additional
flag, '--extrausers', which redirects the pwd to /var/lib/extrausers.
Move the system_is_snappy() check from cc_snappy module to util for
re-use and then update the Distro class to append '--extrausers' if
the system is Ubuntu Core.
|
|
Set the default value for 'ssh_svcname' in rhel distros.
This means that it no longer needs to be set in system_info config.
|
|
Replace the parsing of 'ip' to get a link and mac address list
in OpenNebula's datasource with usage of cloudinit.net.
This makes test cases there not depend on 'ip' availability
and also uses common code.
|
|
This gets the tests running in centos 6.
* ProcessExecutionError: remove setting of .message
Nothing in cloud-init seems to use .message anywhere, so
it does not seem necessary.
The reason to change it is that on 2.6 it spits out:
cloudinit/util.py:286: DeprecationWarning: BaseException.message
* tox.ini: add a centos6 environment
the tox versions listed here replicate a centos6 install with
packages from EPEL.
You will still need a python2.6 to run this env so we do not
enable it by default.
|
|
The amount of code to do user and group normalization
and extraction deserves its own file so move the code
that does this to a new file and update references to the
old location.
This removes some of the funkyness done in config modules
to avoid namespace and attribute clashes as well.
|
|
* debian/cloud-init.templates: enable DigitalOcean by default
|
|
Added DigitalOcean to the default templates as enabled by default.
This allows cloud-init to work out of the box on DigitalOcean droplets.
|
|
Just add DigitalOcean to the list of datasources that are used
if there is no 'datasource_list' provided in config.
|
|
cloud-init-local needs to be run before net (and in the boot runlevel)
as it sets up networking config and adds it to the default runlevel.
cloud-init-local needs to be run in the boot runlevel because it
modifies services in the default runlevel. When a runlevel is started
it is cached, so modifications that happen to the current runlevel while
you are in it are not acted upon.
cloud-init needs to run after net, it does not need net because we still
want it to set up other things if it can.
|
|
|
|
|
|
|
|
This just looks in one other maas related path for a config file.
The file '91_kernel_cmdline_url' is written by cloud-init when it
gets a cloud-config-url parameter.
Also now we read the config even if a url is specified to potentially
fill in credentials.
|
|
This silences a warning made by Cheetah in pip installed environments:
UserWarning: You don't have the C version of NameMapper installed!
I'm disabling Cheetah's useStackFrames option ...
The reason for the monkey patching is that the warning goes to stderr
during nose and breaks up its expected output. The side affect of it
is that tests would run with Cheetah's 'useStackFrames'
enabled which is "painfully slow with the Python version of NameMapper".
|
|
The change reported to fix bug 1629797 was incorrect. It added:
Before=dbus.target
and its commit message referenced dbus.service.
dbus.target does not exist, and dbus.service would not solve the
problem. The change did not fix the problem nor actually make any
difference.
The fix here is just to use Before=dbus.socket.
LP: #1629797
|
|
|
|
|
|
|
|
This is the best work around we have for an issue seen when dns is used
during cloud-init.service on a system that is configured in nsswitch
to use systemd-resolved. The problem is that cloud-init.service was
blocking basic.target, and dbus would not be available until after
cloud-init.service finished.
LP: #1629797
|
|
Some of the new DigitalOcean unittests were written to use 'assert_called',
which is only available in mock versions 2.0. Because of this, the failure
would only occur in releases less than yakkety and not in 'tox'.
Add a 'xenial' entry to tox.ini with versions from xenial.
|
|
|
|
|
|
add 6d1edc3f5a1 to
debian/patches/ntp-move-to-run-after-apt-configuration.patch
LP: #1628337
|
|
This adds lots of config module documentation in a standard format.
It will greatly improve the content at readthedocs.
Additionally:
* Add a 'doc' env to tox.ini
* Changed default highlight language for sphinx conf from python to yaml
most examples in documentation are yaml configs
* Updated datasource examples to highlight sh code properly
|
|
|
|
|
|
|
|
Prior to LXD 2.3, the bridge configuration was done through distro
packaging. Thus, lxd module interacted with debconf.
With 2.3 and higher, this is now done inside LXD itself, so we
need to use "lxc network" there.
For now, this perfectly matches what we had before with debconf and
doesn't cover any of the new options. We can always add those later.
A set of tests similar to what we had for debconf has been added to make
sure things look good.
This is tested in Yakkety container running LXD 2.3 and all options seem
to be passed through as expected, giving me the bridge I defined.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
|
|
On DigitalOcean, Network information is provided via Meta-data.
It changes the datasource to be a local datasource, meaning it
will run before fallback networking is configured.
The advantage of that is that before networking is configured it
can bring up a network device with ipv4 link-local and hit the
metadata service that lives at 169.254.169.254 to find its networking
configuration. It then takes down the link local address and lets
cloud-init configure networking.
The configuring of a network device to go looking for a metadata
service is gated by a check of data in the smbios. This guarantees
that the code will not run on another system.
|
|
Imported using git-dsc-commit.
|
|
since ntp module may try to install packages, it needs to run after
apt is configured.
LP: #1628337
|
|
|
|
|
|
|
|
The test in decode_binary for six.text_type was incorrect as that includes
unicode type in Python 2 which should actually be decoded.
When the type is string_types we now properly check only for basestring and
str in Python 2 and Python 3 respectively and return the given blob without
making an attempt to decode.
|
|
|
|
If device has no partition table, the first line of output from `sgdisk
-p <device>` will be "Creating new GPT entries.", instead of something
like "Disk /dev/sdb: 266338304 sectors, 127.0 GiB".
Also, protect against localized output by adjusting subp calls that
parse sgdisk output to set LANG=C.
|
|
In order for a caller to use 'env' argument of subp, they
will realistically do:
env = os.environ.copy()
env['FOO'] = 'BZR'
subp(cmd, env=env)
This shortens that to be:
subp(cmd, update_env={'FOO': 'BZR'})
Add tests, and update growpart tests to use mock when playing with
os.environ.
|
|
|
|
|
