| Age | Commit message (Collapse) | Author |
|---|
|
Bump the version in cloudinit/version.py to be 0.7.9.
|
|
Bump the version in cloudinit/version.py to be 0.7.8.
|
|
|
|
This improves smart os network configuration
- fix the SocketClient which was previously completely broken.
- adds support for configuring dns servers and dns search (based off the
sdc:dns_domain).
- support 'sdc:gateways' information from the datasource for configuring
default routes.
- add converted network information to output when module is run as a main
This does not support 'sdc:routes' as described at
http://eng.joyent.com/mdata/datadict.html
|
|
|
|
when user-data was not decodable, cloud-init would raise exception.
LP: #1532072
|
|
if no permissions were given in a write_files stanza, then
a warning would be emitted.
The fix here is just to special case handling of None.
|
|
This intends to add support for rendering of network data under sysconfig
distributions (centos and rhel). The end result will be support for
network configuration via ConfigDrive or NoCloud on these OS.
|
|
This commit includes the content of that commit, plus a fix for the tests
(provided by Phil).
|
|
This change broke tox tests.
|
|
LP: #1581200
|
|
In the absence of cheetah, which is a fairly heavy templating engine, and
not strictly needed by anything in cloud-init, the only warning we saw in
the logs was this one from the templater. Degrading this to a debug
message makes any other warnings more relevant.
|
|
This branch accomplishes several things:
- centrally handle 'dsmode' to be 'local' or 'net.
This allows local data sources to run before networking
but still have user-data read by default when networking is available.
- support networking information being read on dreamcompute
dreamcompute's openstack declares networking via the
/etc/network/interfaces style 'network_config' format.
- support reading and applying networking information on SmartOS
- improve reading networking from openstack network_data.json (LP: #1577982)
add support for mtu and routes and many miscellaneous fixes.
- support for renaming devices in a container (LP: #1579130).
Also rename network devices as instructed by the host on
every boot where cloud-init networking is enabled. This is required
because a.) containers do not get systemd.link files applied
as they do not have udev. b.) if the initramfs is out of date
then we need to apply them.
- remove blocking of udev rules (LP: #1577844, LP: #1571761)
LP: #1577982, #1579130, #1577844, #1571761
|
|
- keyid-only (no source statement)
- key only (no source statement)
- custom source.list template
- support long gpg key fingerprints with spaces
- fix issue with key's that were already in the local gpg keyring
- allowing a new format to specify apt_sources in a dictionary instead of a
list to allow merging of configurations
LP: #1574113
|
|
|
|
|
|
This adds support for reading networking information from the
SmartOS metadata service and applying.
|
|
settings on the kernel command line (cc:) were documented to override
all local settings, but a bug in implementation meant they would only
override those that are in /etc/cloud/cloud.cfg, not any found in
/etc/cloud/cloud.cfg.d.
LP: #1582323
|
|
|
|
If the datasource's instance id contained a '/' then the instance_id path
would not be as expected under /var/lib/cloud/instances/instance_id.
LP: #1575938
|
|
LP: #1576273
|
|
This simply allows the phone_home template to pass the systems fully
qualified domain name.
LP: #1566824
|
|
Now, validation_key is always a path to a file, as it is in
chef's client.rb syntax.
validation_cert is always the *content* of that file that should
be written. However, if validation_cert is the string "system",
then we do not write that value, but rather assume the file exists.
LP: #1568940
|
|
Instead of passing the raw object and expecting the write_file to work
automatically make sure we explicitly pass the string version of it so
that the write_file routine can correctly encode/decode it as needed.
LP: #1479988
|
|
syslog.target is obsolete in debian, this fixes a lintian warning.
LP: #1536964
|
|
Installation from gems was previously always broken. This
fixes the order or parameters calling install_chef_from_gems.
LP: #1553345
|
|
Send the --force flag to mkfs or other filesystems when target
is a block device. This fixes a general code flow issue where
we were setting the --force flag.
LP: #1548772
|
|
Now if you log in with unsupported locale, you'll see:
The unknown environment variables are:
LC_CTYPE=en_GB.utf-8 LC_MESSAGES=en_GB.utf-8 LC_ALL=en_GB.utf-8
LP: #1558069
|
|
|
|
this allows 'cloud-init --local' to fully run before networking comes up.
By doing so, we can now cleanly apply networking to the new system.
This adds support for reading ConfigDrive network configuration
and also from NoCloud. The support is only present for ubuntu/debian
at the current time. Other distros will follow.
Also ability to specify network configuration on kernel command line
via either ip= or network-config=<base64>.
|
|
This adds a check in cloud-init to see if the existing (cached)
datasource is still valid. It relies on support from the Datasource
to implement 'check_instance_id'. That method should quickly determine
(if possible) if the instance id found in the datasource is still valid.
This means that we can still notice new instance ids without
depending on a network datasource on every boot.
I've also implemented check_instance_id for the superclass and for
3 classes:
DataSourceAzure (check dmi data)
DataSourceOpenstack (check dmi data)
DataSourceNocloud (check the seeded data or kernel command line)
LP: #1553815
|
|
Add option checking for ssh_pwauth to bring behavior inline with the
description cloud-config.txt example.
Previously, setting 'ssh_pwauth' to 'unchanged' or '' would result
in an empty value for PasswordAuthentication when it should have
simply not been modified.
|
|
|
|
it is not uncommon to find dmi data in /sys full of 'ff'. utf-8
decoding of those would fail, causing warning and stacktrace.
Return '.' instead of \xff. This maps to what dmidecode would return
$ dmidecode --string system-product-name
.................................
|
|
This add 'lxd' to the list of groups that the default user is added to.
It also changes behavior to create any necessary groups that are listed
for the user rather than failing to add the user.
Theres also a fix for usage of logexc that I found along the way.
LP: #1539317
|
|
The user can still choose to run pollinate here to seed their
random data. And in an environment with network datasource, that
would be expected to work. However, we do not want to run it any
more from cloud-init because
a.) pollinate's own init system jobs should get it ran before ssh,
which is the primary purpose of wanting cloud-init to run it.
b.) with a local datasource, there is no network guarantee when
init_modules run, so pollinate -q would often cause issues then.
c.) cloud-init would run pollinate and log the failure causing
many cloud-init specific failures that it could do nothing about.
LP: #1554152
|
|
|
|
|
|
Unless /etc/localtime is an existing file and not a symlink,
then we will symlink instead of copying the tz_file to /etc/localtime.
The copy was due to an old bug in Ubuntu, symlink should be preferred.
LP: #1543025
|
|
This is the first changeset submitted as a part of project to
add cloud-init support for VMware vSphere Hypervisor. This changeset
contains _only_ the changes for a simple python parser for a
Image Customization Specification file pushed by VMware vSphere
hypervisor into the guest VMs. In a later changeset, will be submitting
another patch to actually detect the underlying VMware vSphere hypervisor
and do the necessary customization.
|
|
|
|
LP: #1488891
|
|
|
|
|
|
running-in-container is a wrapper around systemd-detect-virt -c,
and was removed from ubuntu. This adjusts to run if only running-in-container
is available.
LP: #1539016
|
|
LX-brand zones on Joyent's SmartOS use a different metadata source
(socket file) than the KVM-based SmartOS virtualization (serial port).
This patch adds support for recognizing the different flavors of
virtualization on SmartOS and setting up a metadata source file object.
After the file object is created, the rest of the code for the datasource
LP: #1540965
|
|
If lxd key is present in cfg, then run 'lxd init' with values from the 'init'
entry in lxd configuration as flags.
|
|
if a runcmd exited failure, then power_state would not work.
This was because systemd was killing off subprocesses, and cloud-init
implemented power off with a subprocess that waited for the parent
to exit.
LP: #1449318
|
|
Replace the use of SharedConfig.xml in both the walinuxagent case,
and the case where we communicate with the Azure fabric ourselves.
The instance id present in the dmi data is unfortunately different
that that in the SharedConfig. This means that something needs
to handle migration so that a reboot after newer version is installed
will not re-run first instance things.
In Ubuntu this is being handled in packaging.
LP: #1506187
|
|
'nofail' is the systemd equivalent of the mountall/upstart 'nobootwait'.
So, if a system uses systemd, then use 'nofail' in /etc/fstab for
ephemeral mounts.
|
