| Age | Commit message (Collapse) | Author |
|---|
|
It fixes an annoying typo/inconsistency ("ssh-autorized-keys" vs.
"ssh-authorized-keys"), adds descriptions of previously missing config
keys and improves overall consistency within the docs section.
|
|
On systems which installed ntp and specified servers or pools in the
config ntpd didn't notice the updated configuration file and didn't
use the correct configuration. Resolve this by rendering the template
first which allows the package install to use the existing
configuration. Additionally add a service restart to handle the case
where ntp does not need to be installed but it may not have started.
Add an integration test to confirm that cc_ntp enables ntp to use the
specific servers and pools in the cloud-config.
LP: #1645644
|
|
Large instance types have a different disk format on the newly
partitioned ephemeral drive. So we have to adjust the logic in the
Azure datasource to recognize that a disk with 2 partitions and
an empty ntfs filesystem on the second one is acceptable.
This also adjusts the datasources's builtin fs_setup config to remove
the 'replace_fs' entry. This entry was previously ignored, and confusing.
I've clarified the doc on that also.
LP: #1686514
|
|
Apt related tests were broken when running on centos becasue apt is not
available. This fixes the unit test, with a small re-work of apt_configure.
Also in 'tox -e centos6' only run nose on tests/unittests as tests/
also contain integration tests that should not be run.
|
|
This patch targets to make FreeBSD 10.3 or 11 work on Azure. The
modifications abide by the rule of:
* making as less modification as possible
* delegate to the distro or datasource where possible.
The main modifications are:
1. network configuration improvements, and movement into distro path.
2. Fix setting of password.
Password setting through "pw" can only work through pipe.
3. Add 'root:wheel' to syslog_fix_perms field.
4. Support resizing default file system (ufs)
5. copy cloud.cfg for freebsd to /etc/cloud/cloud.cfg rather than
/usr/local/etc/cloud/cloud.cfg.
6. Azure specific changes:
a. When reading the azure endpoint, search in a different path
and read a different option name (option-245 vs. unknown-245).
so, the lease file path should be generated according to platform.
b. adjust the handling of ephemeral mounts for ufs filesystem and
for finding the ephemeral device.
c. fix mounting of cdrom
LP: #1636345
|
|
If 'cmd' is provided to a fs_setup entry, then cloud-init was trying
to execute the rendered string as a single name, rather than
splitting the string. The change here will pass the string to
shell for interpretation so that it is split there.
Also fix some documentation errors and warn when fs_opts or overwrite
is provided along with 'cmd'.
LP: #1687712
|
|
The key is called "uri", not "url". This is what's used throughout the
examples and also what works in practice (verified on Ubuntu 16.10).
This also slightly improves formatting of the key names in the
related documentation.
|
|
ConfigObj produces configuration files that are incompatible with yum if
multiple values are listed for a configuration key. Switch to the builtin
configparser, and ConfigParser (Python 2) which correctly handles this
case.
Add additional test case for array values in yum_repos definition
LP: #1592150
|
|
Growing the root partition would fail in either of two cases:
a.) if the device /dev/root existed
b.) the kernel command line had upper case letters in PARTUUID=<value>
the kernel will accept upper case partuuid, but udev creates
links with lower case. In that scenario, we need to adjust to
a /dev/disk/by-<partuuid|uuid> with lower case.
The fix here addresses that, and also fixes uuid similarly for the
lowercase issue.
LP: #1684869
|
|
This will change all instances of LOG.warn to LOG.warning as warn
is now a deprecated method. It will also make sure any logging
uses lazy logging by passing string format arguments as function
parameters.
|
|
|
|
Several references that were using URL shorteners are now broken due to
their service going away, making it painful to even figure out what they
were supposed to be pointing at. Put back long URLS using '# noqa' to
make flake8 happy.
LP: #1669727
|
|
On centos/fedora/rhel/derivatives, /etc/ssh/sshd_config has mode 0600,
but cloud-init unilaterally sets file modes to 0644 when no explicit
mode is passed to util.write_file. On ubuntu/debian, this file has
mode 0644. With this patch, write_file learns about the copy_mode
option, which will cause it to use the mode of the existing file by
default, falling back to the explicit mode parameter if the file does
not exist.
LP: #1644064
Resolves: rhbz#1295984
|
|
When booted without an initramfs, the root device will be /dev/root, not a
named device. There is partial support for this when resizing filesystems,
but not for growing partitions, without which it doesn't do much good. Move
the /dev/root resolution code to util.py and use it from cc_growpart.py.
Also, booting without an initramfs only works with a root= argument that's
either a kernel device name (which is unstable) or a partition UUID. Handle
the case of root=PARTUUID=value, not just LABEL and UUID.
LP: #1677376
|
|
Do not bother configuring apt if no 'apt' config is provided and either:
a.) running on snappy
b.) there is no 'apt' command (possibly a different distro)
If apt config is provided in either of the above situations, then config
will continue.
LP: #1675185
|
|
This change will add support for hashed passwords in cc_set_passwords.
It checks if a password is a hash with by checking that it matches
in fairly safe way, and also that the password does not have a ":" in it.
chpasswd needs to know if the password is hashed or not, so two lists
is created so chpasswd is feed with the correct one.
LP: #1570325
|
|
Accordingly to the documentation:
The ``partition`` option may also be set to ``auto``, in which this
module will search for the existance of a filesystem matching the
``label``, ``type`` and ``device`` of the ``fs_setup`` entry and
will skip creating the filesystem if one is found.
However, using this "auto" flag always recreates the partition no matter
if it has been done before or not.
This commit fixes a bug in which the "partition" attribute was always
set to None although in some cases it should not.
LP: #1634678
|
|
This adds an integration test for setting passwords when given
as a list rather than a string. This also updates the docs and
tests so that Random is now RANDOM as is correct.
|
|
Omnibus installation of chef was broken under python3.
LP: #1583837
|
|
The adjusted change did not support
#cloud-config
password: passw0rd
This correctly fixes that regression.
|
|
This regression was caused by my rework of Sergio's branch.
The change now still works when there is no chpasswd/list provided.
|
|
cc_set_passwords previously supported 'list' as a multiline string:
chpasswd:
list: |
user:pass1
user015:R
This patch adds support for user/pairs as a list:
chpasswd:
list:
- user:pass1
- user015:R
LP: #1665694
|
|
The documentation indicated chpasswd/list should be a list when
the code only accepts a string.
LP: #1665773
|
|
|
|
This has been a recurring ask and we had initially just made the change to
the cloud-init 2.0 codebase. As the current thinking is we'll just
continue to enhance the current codebase, its desirable to relicense to
match what we'd intended as part of the 2.0 plan here.
- put a brief description of license in LICENSE file
- put full license versions in LICENSE-GPLv3 and LICENSE-Apache2.0
- simplify the per-file header to reference LICENSE
- tox: ignore H102 (Apache License Header check)
Add license header to files that ship.
Reformat headers, make sure everything has vi: at end of file.
Non-shipping files do not need the copyright header,
but at the moment tests/ have it.
|
|
'nobootwait' is an upstart specific extension to the mount syntax that is
not supported by other mount systems. As Ubuntu 16.04 moved from upstart
to systemd, support for 'nobootwait' was lost.
All examples using 'nobootwait' are updated to use the standard 'nofail',
which gives the expected behaviour of not failing to boot in case a volume
is missing. There are subtle differences in semantics between
'nobootwait' and 'nofail', but it is the best substitute that gives
behaviour similar to the upstart specific option.
|
|
During recent changes to cc_mounts, on systemd systems, we started using
systemctl daemon-reload
rather than 'mount -a' to get mounts done.
The belief was that since entries in /etc/fstab would be written
to tell systemd that they should be after cloud-init
(x-systemd.requires=cloud-init.service) that the reload would then
let systemd mount the units as expected.
That doesn't seem to work, and new mount entries end up not getting
mounted. The change here moves back to using 'mount -a', but
then also does a systemctl daemon-reload.
LP: #1647708
|
|
Several various minor fixes for the readthedocs documentation.
|
|
A user has pointed out that upon set up of a machine, users typically
remove repos (sometimes all of them) and then add repos in. This does
make sense for a typical user.
|
|
The version of sfdisk in wily (and onwards) only accepts sectors as a
valid disk size. As such, this refactors the MBR code path in
cc_disk_setup to use sectors.
- use --unit=S: while newer versions of sfdisk assume --unit=S, older
versions do not so we specifically pass it in. Versions of sfdisk
found in supported OSes such as centos6 wont assume --unit=S.
- add --force: this exists back to centos 6 (2.17.2), so it should
be fine, and is what we ultimately want.
"do what I say, even if it is stupid"
- keep --Linux. Even though this has been deprecated for quite some
time, we keep it until versions that want it are unsupported.
If necessary at some point we could check for util linux version
and if it had --Linux and use it in those cases.
Additionally, improve usefulness of some log messages.
LP: #1460715
|
|
This adds a call to 'activate_datasource'. That will be called
during init stage (or init-local in the event of a 'local' dsmode).
It is present so that the datasource can do platform specific operations
that may be necessary. It is passed the fully rendered cloud-config
and whether or not the instance is a new instance.
The Azure datasource uses this to address formatting of the ephemeral
devices. It does so by
a.) waiting for the device to come online
b.) removing the marker files for the disk_setup and mounts modules
if it finds that the ephemeral device has been reset.
LP: #1611074
|
|
pycodestyle 2.1.0 is in Ubuntu zesty, and complained about the
changes made here. Simple style changes. This makes 'make pep8'
pass again when built in a zesty build system with proposed enabled.
|
|
Simple typo fixes.
|
|
Previous commit f0747c4b4cf073273e11d383f0354257be7276ed relocated
normalize_users_groups to ug_util module, but missed modifying
the cc_users_groups config module. Apply the location change to fix.
|
|
The function exec_mkpart_gpt was simply not waiting for udev events
to flush after calling sgdisk. The corresponding function
exec_mkpart_mbr already did.
This should fix a transient failure where mkfs would fail with
'not a block device'.
LP: #1626243
|
|
Update the summary of rsyslog module and add logging.rst to docs.
|
|
Ubuntu Core images use the `snap create-user` to add users to an
Ubuntu Core system. Add support for creating snap users by adding
a key to the users dictionary.
users:
- name: bob
snapuser: bob@bobcom.io
Or via the 'snappy' dictionary:
snappy:
email: bob@bobcom.io
Users may also create a snap user without contacting the SSO by
providing a 'system-user' assertion by importing them into snapd.
Additionally, Ubuntu Core systems have a read-only /etc/passwd such that
the normal useradd/groupadd commands do not function without an additional
flag, '--extrausers', which redirects the pwd to /var/lib/extrausers.
Move the system_is_snappy() check from cc_snappy module to util for
re-use and then update the Distro class to append '--extrausers' if
the system is Ubuntu Core.
|
|
The amount of code to do user and group normalization
and extraction deserves its own file so move the code
that does this to a new file and update references to the
old location.
This removes some of the funkyness done in config modules
to avoid namespace and attribute clashes as well.
|
|
This adds lots of config module documentation in a standard format.
It will greatly improve the content at readthedocs.
Additionally:
* Add a 'doc' env to tox.ini
* Changed default highlight language for sphinx conf from python to yaml
most examples in documentation are yaml configs
* Updated datasource examples to highlight sh code properly
|
|
Prior to LXD 2.3, the bridge configuration was done through distro
packaging. Thus, lxd module interacted with debconf.
With 2.3 and higher, this is now done inside LXD itself, so we
need to use "lxc network" there.
For now, this perfectly matches what we had before with debconf and
doesn't cover any of the new options. We can always add those later.
A set of tests similar to what we had for debconf has been added to make
sure things look good.
This is tested in Yakkety container running LXD 2.3 and all options seem
to be passed through as expected, giving me the bridge I defined.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
|
|
If device has no partition table, the first line of output from `sgdisk
-p <device>` will be "Creating new GPT entries.", instead of something
like "Disk /dev/sdb: 266338304 sectors, 127.0 GiB".
Also, protect against localized output by adjusting subp calls that
parse sgdisk output to set LANG=C.
|
|
The end result of all of these changes is to get mounts managed by
cloud-init to occur only after cloud-init.service is done. We need to do
that so that filesystems that are set up by cloud-init (in disk_setup)
do not get mounted by stale entries in /etc/fstab before
the setup occurs.
This can occur in 2 ways:
a.) new instance with old /etc/fstab
b.) same instance where disk needs adjusting (Azure resize will re-format
the ephemeral disk).
The list of changes here is:
- move mounts and disk_setup module to cloud-init.service rather
than config. cloud-init.service runs earlier in boot so it
can get those mount points done earlier.
- on systemd add 'x-systemd.requires=cloud-init.service' to fstab options
- cloud-init-local.service: add Before=basic.target
- cloud-init.service:
- extend After, Before, and Wants to multiple lines rather than one
long line.
- sort consistently with cloud-init-local.service
- add DefaultDependencies=no
- add Before=default.target
- add Conflicts=shutdown.target
LP: #1611074
|
|
Old behavior allowed a user to provide:
apt_mirror: ""
And that was the same as:
apt_mirror: null
and the same as having not specified apt_mirror at all. This maintains
that behavior for all old string values.
LP: #1621180
|
|
This should be fqdn, not fdqn.
LP: #1607810
|
|
Assuming that the installed package creates the directory
/etc/salt/pki/minion (ubuntu yakkety does), this will pick that
directory for the pki_dir default.
If it does not exist, then it will maintain the old directory.
LP: #1609899
|
|
This allows both v1/2 and and v3 formats to exist in config.
If both are present, then prefer v3. If values are not the same
then a ValueError is raised.
LP: #1616831
|
|
Spacewalk is used by some peopel to manage connections into redhat package
management systems and kickstart and various other tasks, so having a
system be able to do the needed tasks on first boot to integrate with that
system would be very useful (to some).
See: https://fedorahosted.org/spacewalk/
|
|
This adds an improved apt configuration format that is fully backwards
compatible with previous behavior. This is mostly copied from curtin's
implementation.
It does:
* clean up and centralizes many of the top level 'apt_*' values that
previously existed into a single top level 'apt'key.
* support a 'source' in apt/sources/entry that has only a key
* documents new features and adds tests.
See the added doc/examples/cloud-config-apt.txt for more information.
|
|
The older versions have various issues with unicode
and those versions seem to be pulled into epel so
we should denote that those versions are bad and
shouldn't be used by updating to a newer version that
does work.
|
|
Some of these really won't work to well on non-supporting
distros so to avoid further user pain tag this with the
supported distros where they should work.
|
