| Age | Commit message (Collapse) | Author |
|---|
|
|
|
This allows the customization of the apt-get command used for installing
packages, and also adds '--force-unsafe-io'. Because this is spawned from
cloud-init, it seems to make sense as a first boot package installation
option.
|
|
|
|
|
|
|
|
|
|
|
|
resize_devices now contains what action occurred for each entry.
|
|
|
|
growrun --dry-run will exit 1 if it wouldn't do anything.
so call it, check for '1' and if no change, then just return.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Last addition to DataSourceNoCloud left it looking for a filesystem
named 'None'.
|
|
Now, parser.parse specifies options that override any options found,
rather than just being default options.
There could still potentially be a user for default_options, but since we're
not using them anywhere, I've dropped it. The difference is that in setting up
the root user, we're now insisting that all keys that go in there have the
key_prefix, even if the key content had other options.
I think this is actually the commit that fixes LP: #1136343.
|
|
|
|
* drop the parsing of options into csv, as we were only exploding them
back. That can only result in error. Just do minimal parsing.
* change the parsing of key lines to:
if entry is valid:
* use it
else try taking off options:
if good, use it
else fail
|
|
LP: #1136936
|
|
The existing code has two issues with btrfs:
1) The command to resize a btrfs filesystem uses a path to the mount
point, not the underlying device:
$ btrfs filesystem resize max /dev/vda1
ERROR: unable to resize '/dev/vda1' - Inappropriate ioctl for device
Resize '/dev/vda1' of 'max'
$ btrfs filesystem resize max /
Resize '/' of 'max'
2) The code that is given a path and finds the ID of the device where
the path is mounted doesn't work for btrfs:
Use /proc/$$/mountinfo to find the device where path is mounted.
This is done because with a btrfs filesystem using os.stat(path)
does not return the ID of the device.
Here, / has a device of 18 (decimal).
$ stat /
File: '/'
Size: 234 Blocks: 0 IO Block: 4096 directory
Device: 12h/18d Inode: 256 Links: 1
Access: (0755/drwxr-xr-x) Uid: ( 0/ root) Gid: ( 0/ root)
Access: 2013-01-13 07:31:04.358011255 +0000
Modify: 2013-01-13 18:48:25.930011255 +0000
Change: 2013-01-13 18:48:25.930011255 +0000
Birth: -
Find where / is mounted:
$ mount | grep ' / '
/dev/vda1 on / type btrfs (rw,subvol=@,compress=lzo)
And the device ID for /dev/vda1 is not 18:
$ ls -l /dev/vda1
brw-rw---- 1 root disk 253, 1 Jan 13 08:29 /dev/vda1
So use /proc/$$/mountinfo to find the device underlying the input
path.
|
|
For now, we disable reloading upstart jobs due to bug 1124384.
At some point in the future, we could enable it again when that
bug is fixed.
The change here allows for a boothook in a multipart input to write the
file '/run/cloud-init-upstart-reload' and then have configuration
reloaded.
|
|
|
|
|
|
|
|
LP: #1115833
|
|
This change adds the ability to provide specific package versions to
Distro.install_packages and subsequently Distro.package_command. In order
to effectively use Distro.install_packages, one is now able to pass a
variety of formats in order to easily manage package requirements.
These are examples of what can be passed:
- "package"
- ["package1","package2"]
- ("package",)
- ("package", "version")
- [("package1",)("package2",)]
- [("package1", "version1"),("package2","version2")]
This change also adds the option to install a specific version for the
puppet configuration module. This is especially important here as
successful puppet deployments are highly reliant on specific puppet
versions.
|
|
Augmenting the package version support to be available when specifying
extra packages to be installed at boot via the 'packages:' yaml key. This
change also improves type checking and add a configuration example to the
docs.
|
|
Right now, all distros but ubuntu will fail to manage /etc/hosts.
This is due to the fact that the templates are named:
- hosts.ubuntu.tmpl
- hosts.redhat.tmpl
The config handler is specifically looking for a template with the
given distro name.
This change addresses this issue.
|
|
The existing code has two issues with btrfs:
1) The command to resize a btrfs filesystem uses a path to the mount
point, not the underlying device:
$ btrfs filesystem resize max /dev/vda1
ERROR: unable to resize '/dev/vda1' - Inappropriate ioctl for device
Resize '/dev/vda1' of 'max'
$ btrfs filesystem resize max /
Resize '/' of 'max'
2) The code that is given a path and finds the ID of the device where
the path is mounted doesn't work for btrfs:
Use /proc/$$/mountinfo to find the device where path is mounted.
This is done because with a btrfs filesystem using os.stat(path)
does not return the ID of the device.
Here, / has a device of 18 (decimal).
$ stat /
File: '/'
Size: 234 Blocks: 0 IO Block: 4096 directory
Device: 12h/18d Inode: 256 Links: 1
Access: (0755/drwxr-xr-x) Uid: ( 0/ root) Gid: ( 0/ root)
Access: 2013-01-13 07:31:04.358011255 +0000
Modify: 2013-01-13 18:48:25.930011255 +0000
Change: 2013-01-13 18:48:25.930011255 +0000
Birth: -
Find where / is mounted:
$ mount | grep ' / '
/dev/vda1 on / type btrfs (rw,subvol=@,compress=lzo)
And the device ID for /dev/vda1 is not 18:
$ ls -l /dev/vda1
brw-rw---- 1 root disk 253, 1 Jan 13 08:29 /dev/vda1
So use /proc/$$/mountinfo to find the device underlying the input
path.
|
|
Quick chat with ctracy indicated that this is just as well run
PER_INSTANCE, and it is more consistent with other things that way.
|
|
This change adds the ability to provide specific package versions to
Distro.install_packages and subsequently Distro.package_command. In order
to effectively use Distro.install_packages, one is now able to pass a
variety of formats in order to easily manage package requirements. These
are examples of what can be passed:
- "package"
- ["package1","package2"]
- ("package",)
- ("package", "version")
- [("package1",)("package2",)]
- [("package1", "version1"),("package2","version2")]
This change also adds the option to install a specific version for the
puppet configuration module. This is especially important here as
successful puppet deployments are highly reliant on specific puppet
versions.
|
|
Managing resolv.conf can be quite handy when running in an environment
where you would like to control DNS resolution, despite being provided
DNS server information by DHCP. This module will allow one to define the
structure of their resolv.conf and write it PER_ONCE.
Right now this makes the most sense on RedHat, and therefore, has defined 'distros' as such.
Note that when a config drive is used, and dhcp is not used that this module
may not be applicable since in the RedHat based distros the config drive typically
contains a ubuntu style network configuration which contains nameservers that can
be used in /etc/resolv.conf, but for other types of datasources it is useful to
have a module which can be specifically configured to write out /etc/resolv.conf
|
|
When the old user: style entry is found, don't forget that
we need to use the distro settings that are provided but
override the name with the new name, this is now accomplished
by merging them together in the correct order (using the standard
cloud-init merging algo).
|
|
Often it is convenient to classify a distro as being part of an
operating system family. for instance, file templates may be
identical for both debian and ubuntu, but to support this under
the current templating code, one would need multiple templates for the
same code.
Similarly, configuration handlers often fall into the same bucket: the
configuraton is known to work/has been tested on a particular family
of operating systems. right now this is handled with a declaration
like:
distros = ['fedora', 'rhel']
This fix seeks to address both of these issues. it allows for the
simplification of the above line to:
osfamilies = ['redhat']
It also provides a mechanism for operating system family templates.
|
|
When the old user: style entry is found, don't forget that
we need to use the distro settings that are provided but
override the name with the new name, this is now accomplished
by merging them together in the correct order (using the standard
cloud-init merging algo).
|
|
Previously if a legacy user: XYZ entry was found, XYZ would not automatically
be promoted to the default user but would instead just be added on as a new
entry to the normalized user list. It appears the behavior that is wanted is
for the XYZ entry to be added on as the default user (thus overriding a distro
provided default user), which better matches how the code previous worked.
LP: #1100920
|
|
Forgot to pass cfg to this function, and thus this would have never
worked.
|
|
Managing resolv.conf can be quite handy when running in an environment
where you would like to control DNS resolution, despite being provided
DNS server information by DHCP. This module will allow one to define the
structure of their resolv.conf and write it PER_ONCE.
Right now this makes the most sense on RedHat, and therefore, has defined
'distros' as such.
|
|
previously, there was an attempt in the config drive source to limit
the source device to a "full block device" rather than a partition.
This was done by a simplistic approach of checking that the last
character of the name was not a number. That was filtering out
CD-rom devices (sr0).
Now, we have a bit more sophisticated approach to that same problem.
We filter out block devices that have a 'partition' entry in
/sys/class/block/DEVICE_NAME/partition .
LP: #1100545
|
|
Right now, all distros but ubuntu will fail to manage /etc/hosts. This
is due to the fact that the templates are named:
- hosts.ubuntu.tmpl
- hosts.redhat.tmpl
The config handler is specifically looking for a template with the
given distro name.
This change addresses this issue and is contingent upon support of
'osfamilies' as implemented in LP: #1100029
(lp:~craigtracey/cloud-init/osfamilies)
|
|
accidentally removed a line between two functions.
|
|
often it is convenient to classify a distro as being part of an
operating system family. for instance, file templates may be
identical for both debian and ubuntu, but to support this under
the current templating code, one would need multiple templates for the
same code.
similarly, configuration handlers often fall into the same bucket: the
configuraton is known to work/has been tested on a particular family
of operating systems. right now this is handled with a declaration
like:
distros = ['fedora', 'rhel']
this fix seeks to address both of these issues. it allows for the
simplification of the above line to:
osfamilies = ['redhat']
and provides a mechanism for operating system family templates.
|
|
Previously cloud-config to get a '/dev/sr0' entry written to /etc/fstab
would have had to have the full /dev/sr0. This change allows cloud-config
to reference it without the '/dev/' prefix. Like:
| mounts:
| - [ sr0, /media/sr0 ]
|
|
Changes in revision 753 broke cloud-init on ubuntu, as it has a different
dhclient directory than Fedora where the change was developed and tested.
This change does 2 things:
* searches multiple directories (including /var/lib/dhcp) for the lease
files.
* adds a fallback to the old code path of choosing the default route
as the virtual router if there were no virtual routers found in the
lease files.
LP: #1089989
|
|
This simiplifies the logic, by just making it independent of 'system'.
LP: #1096423
|
