| Age | Commit message (Collapse) | Author |
|---|
|
Added an unattended installer, compatible with similar from VyOS 1.3.
Check the `config/cloud.cfg.d/20_vyos_install.cfg` for configuration details.
|
|
Cloud-init in environments where Meta-data is available via network configures
the main interface and keeps the config in `/etc/network/interfaces.d/`.
This config later interferes with the VyOS configuration.
To avoid the problem previously the code in the `cc_vyos.py` module was used,
but this is not enough. The module is running only once during instance
deployment. But Cloud-init will re-add the config file with each boot.
There are two ways to solve this incompatibility (within Cloud-init) - disable
network config or perform cleanup during each boot.
Disabling network config is not correct in this context, because it blocks the
ability to fetch Meta-data after the first boot, which in turn blocks the
ability to run per-boot modules with an updated config.
Therefore, the cleanup code was extracted to an independent
`cc_vyos_ifupdown.py` module that performs proper cleanup with each boot.
|
|
Improperly generated configuration can break the configuration process. This fix
updates CLI items from the old to the current syntax.
Fixed CLI config items for:
- NTP servers
- HTTPS API
- domain-search
|
|
Configuration in `vyos_config_commands` is expected to use a syntax from the
target VyOS version. But, if Cloud-init applies configuration commands to a
default file, all the migrations (from the 0 version to the latest) will still
be executed on top of it.
This process can break proper config, for example, if the current syntax variant
partially repeats one of the older ones, which will trigger a migration without
need.
|
|
|
|
- added extra check for maximum supported MTU to avoid exceeding it during
configuration
- remove udev rules created by cloud-init after initialization
- fixed logic for config file selection
|
|
To avoid problems with SSH public key comments with special characters the
parser now generates UUID names for keys if a comment contains anything
except `[a-zA-Z0-9_]`.
|
|
A new option for Cloud-Init was added:
```
vyos_config_options:
network_config: <disabled/enabled>
```
Possible values:
* by default - equal to the `network['config']` from the active Cloud-Init
configuration
* `enabled` - configure networking, even if global `network['config']` is set
to `disabled`
* `disabled` - do not configure networking, regardless of global
`network['config']` value
|
|
network-config: T4954: Fixed DNS settings
|
|
Fixed different mistakes in the `cc_vyos` module, like wrong variable types,
functions calls or returns.
|
|
This commit fixes setting DNS configuration if it was presented as a string
instead array of strings.
|
|
This commit fixes the problem with overwritting tag nodes by neighbors, when
there are more than one tag node on the same level.
|
|
Added the support for all types of interfaces supported in
network-config. See detail here:
https://cloudinit.readthedocs.io/en/22.1_a/topics/network-config.html
For Networking Config Version 1:
- physical
- bond
- bridge
- vlan
- nameserver
- route
For Networking Config Version 2:
- ethernets
- bonds
- bridges
- vlans
Also, the code was refactored to reduce actions duplication and prepare
for future syntax and structure improvements.
|
|
Merged with 22.1 tag from the upstream Cloud-init repository.
Our modules were slightly modified for compatibility with the new
version.
|
|
This commit adds the ability to deconfigure all the interfaces that
Cloud-init configured during deployment and remove the configuration
file `/etc/network/interfaces.d/50-cloud-init`. This should protect from
conflicts between CLI config and actual interfaces states.
|
|
Bump the version in cloudinit/version.py to 22.1 and
update ChangeLog.
LP: #1960939
|
|
Pre-provisioned instances report ready early in the local phase and
again in the non-local phase, during setup(). Non-PPS only reports
ready during non-local phase.
Update the process to report ready during the local phase for all
cases. Only attempt to do so if networking is up to prevent stalling
boot. We've already waited at least 20 minutes for DHCP if we're
provisioning, or 5 minutes for DHCP on normal boot requesting updated
network configuration.
- Extend _report_ready() with pubkey_info and raise exception
on error to consolidate reporting done in _negotiate() and
_report_ready().
- Remove setup(), moving relevant logic into crawl_metadata().
- Move remaining _negotiate() logic into _cleanup_markers() and
_determine_wireserver_pubkey_info().
These changes effectively fix two issues that were present:
(1) _negotiated is incorrectly set to True
When failing to report ready. _negotiate() squashed the exception and
the return value was not checked. This was probably masked due to the
forced removal of obj.pkl on Ubuntu instances, but would be preferable
once we start persisting it to prevent unnecessary re-negotiation.
(2) provisioning media is not ejected for non-PPS
_negotiate() did not pass iso_dev parameter when reporting ready. The
host will ensure this operation takes place, but it is preferable to
eject /dev/sr0 from within the guest when we're done with it.
Lastly, this removes any need for lease file parsing as the wireserver
addressed is tracked for ephemeral DHCP. A follow-up PR will remove
this now-unused logic.
Signed-off-by: Chris Patterson <cpatterson@microsoft.com>
|
|
Due to race conditions and caching, IMDS may return stale or incomplete
metadata. Add some validation to detect these scenarios and report
appropriate telemetry.
Introduce normalize_mac_address() to allow for comparison of mac
addresses, replacing that found inline in:
_generate_network_config_from_imds_metadata()
Add validation of final fetch of IMDS metadata.
Signed-off-by: Chris Patterson <cpatterson@microsoft.com>
|
|
|
|
Use PEP 589 syntax for TypeDict annotation.
Also fixes previously broken typing MetaSchema typing implementation.
|
|
Eliminated the duplicate code and now run the entire configuration
routine against both public and private interfaces.
Also addressed an inconsistency from our metadata api for ipv6
address configuration.
|
|
Raise runtime errors for unhandled cases which would cause other
exceptions. Ignore types for a few cases where a non-trivial
refactor would be required to prevent the warning.
Signed-off-by: Chris Patterson <cpatterson@microsoft.com>
|
|
Fixes the spaces introduced in #1213
Signed-off-by: Chris Patterson <cpatterson@microsoft.com>
|
|
Handlers for per-boot/per-instance/per-once multipart MIME
Add handlers for adding scripts to userdata that can be run at various
frequencies. Scripts of type x-shellscript-per-boot,
x-shellscript-per-instance, or x-shellscript-per-once can be added
to a multipart MIME userdata message as part of instance userdata.
These scripts will then be added to the appropriate per-boot,
per-instance, or per-once directory in /var/lib/cloud/scripts/
during processing of userdata.
|
|
Once a valid datasource is detected, publish the following artifacts
to expedite cloud-identification without having to invoke cloud-id from
shell scripts or sheling out from python.
These files can also be relied on in systemd ConditionPathExists
directives to limit execution of services and units to specific
clouds.
/run/cloud-init/cloud-id:
- A symlink with content that is the canonical cloud-id of the
datasource detected. This content is the same lower-case value
as the output of /usr/bin/cloud-id.
/run/cloud-init/cloud-id-<canonical-cloud-id>:
- A single file which will contain the canonical cloud-id encoded
in the filename
|
|
Split _get_public_ssh_keys_and_source() into
_get_public_keys_from_imds() and _get_public_keys_from_ovf().
Set _get_public_keys_from_imds() to take a parameter of the
IMDS metadata rather than assuming it is already set in
self.metadata. This will allow us to move negotation into
local phase where self.metadata may not be set yet. Update this
method to raise KeyError if IMDS metadata is missing/malformed,
and ValueError if SSH key format is not supported. Update
get_public_ssh_keys() to catch these errors and fall back to the
OVF/Wireserver keys as needed.
To improve clarity, update register_with_azure_and_fetch_data()
to return the list of SSH keys, rather than bundling them into
a dictionary for updating against the metadata dictionary.
There should be no change in behavior with this refactor.
Signed-off-by: Chris Patterson <cpatterson@microsoft.com>
|
|
When the datasource was originally submitted, EphemeralDHCPv4 was not
yet available. Also avoid race conditions by skipping network
configuration if metadata service can be reached.
Signed-off-by: Markus Schade <markus.schade@hetzner.com>
|
|
This change converts the IPv6 netmask from the network_data.json[1]
format to the CIDR style, <IPv6_addr>/<prefix>.
Using an IPv6 address like ffff:ffff:ffff:ffff:: does not work with
NetworkManager, nor networkscripts.
NetworkManager will ignore the route, logging:
ifcfg-rh: ignoring invalid route at \
"::/:: via fd00:fd00:fd00:2::fffe dev $DEV" \
(/etc/sysconfig/network-scripts/route6-$DEV:3): \
Argument for "::/::" is not ADDR/PREFIX format
Similarly if using networkscripts, ip route fail with error:
Error: inet6 prefix is expected rather than \
"fd00:fd00:fd00::/ffff:ffff:ffff:ffff::".
Also a bit of refactoring ...
cloudinit.net.sysconfig.Route.to_string:
* Move a couple of lines around to reduce repeated code.
* if "ADDRESS" not in key -> continute, so that the
code block following it can be de-indented.
cloudinit.net.network_state:
* Refactors the ipv4_mask_to_net_prefix, ipv6_mask_to_net_prefix
removes mask_to_net_prefix methods. Utilize ipaddress library to
do some of the heavy lifting.
LP: #1959148
|
|
Remove debug print that snuck in on a previous fixup.
Signed-off-by: Chris Patterson <cpatterson@microsoft.com>
|
|
Introduce:
- _setup_ephemeral_networking() to bring up networking.
If no iface is specified, it will use net.find_fallback_nic()
which is consistent with the previous usage of fallback_interface.
This method now tracks the encoded address of the wireserver
with a new property `_wireserver_endpoint`. Introduce a
timeout parameter to allow for retrying for a specified amount
of time.
- _teardown_ephemeral_networking() to bring down networking.
- _is_ephemeral_networking_up() to check status.
Ephemeral networking is now:
- Brought up prior to checking IMDS.
- Torn down following metadata crawl.
- For Savable PPS, torn down prior to waiting for NIC detach.
The link must be torn down in advance or we will see errors
from cleaning up network after the interface is unplugged.
- For Running PPS, torn down after waiting for media switch.
The link must be up for media switch to be detected.
- For all PPS, after network switch is complete, networking is
brought back up to poll for reprovision data and report ready.
It will be torn down after metadata crawl is complete like
non-PPS paths.
Additionally:
- Remove EphemeralDHCPv4WithReporting variant in favor of directly
using EphemeralDHCPv4. The reporting was only for __enter__ usage
which is no longer a used path. Continue to use dhcp_log_cb
callback.
Signed-off-by: Chris Patterson <cpatterson@microsoft.com>
|
|
This fixes a bug that prevents the salt module from enabling the salt minion in rc.conf.
For more details:
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=254339
|
|
Currently _check_if_nic_is_primary() checks for imds_md is None,
but imds_md is returned as an empty dictionary on error fetching
metdata.
Fix this check and the tests that are incorrectly vetting IMDS
polling code.
Additionally, use response.contents instead of str(response) when
loding the JSON data returned from readurl. This helps simplify the
mocking and avoids an unncessary conversion.
Signed-off-by: Chris Patterson <cpatterson@microsoft.com>
|
|
The ephemeral disk depends on a functional network to be mounted. Even
though it depends on cloud-init.service, sometimes an ordering cycle is
noticed on the instance. If the option "_netdev" is added the problem is
gone.
rhbz: #1998445
Signed-off-by: Eduardo Otubo otubo@redhat.com
|
|
|
|
|
|
Migrate from legacy schema or define new schema in
cloud-init-schema.json, adding extensive schema tests for:
- cc_apt_configure
- cc_bootcmd
- cc_byobu
- cc_ca_certs
- cc_chef
- cc_debug
- cc_disable_ec2_metadata
- cc_disk_setup
Deprecate config hyphenated schema keys in favor of underscores:
- ca_certs and ca_certs.remove_defaults instead of
ca-certs and ca-certs.remove-defaults
- Continue to honor deprecated config keys but emit DEPRECATION
warnings in logs for continued use of the deprecated keys:
- apt_sources key
- any apt v1 or v2 keys
- use or ca-certs or ca_certs.remove-defaults
- Extend apt_configure schema
- Define more strict schema below object opaque keys using
patternProperties
- create common $def apt_configure.mirror for reuse in 'primary'
and 'security' schema definitions within cc_apt_configure
Co-Authored-by: James Falcon <james.falcon@canonical.com>
|
|
Refactor _report_ready_if_needed() to work for both Savable PPS
and Runnable PPS:
* rename _report_ready_if_needed() to _report_ready_for_pps()
* return interface name from lease to support _poll_imds() behavior
without changing it.
* fixes an issue where reporting ready return value was silently
ignored for Savable PPS.
* add explicit handling for failure to obtain DHCP lease to
result in sources.InvalidMetaDataException.
Refactor _poll_imds():
* use _report_ready_for_pps() for reporting ready, removing this logic
to simplify loop logic.
* move netlink and vnetswitch out of while loop to simplify loop logic,
leaving only reprovision polling in loop.
* add explicit handling for failure to obtain DHCP lease and
retry in the next iteration.
Signed-off-by: Chris Patterson cpatterson@microsoft.com
|
|
|
|
Consolidate _should_reprovision_after_nic_attach() with
_should_reprovision() into the following:
_write_reprovision_marker() to write provisioning marker for
reboot-during-provisioning case.
PPSType enum and _determine_pps_type() for determining which to
provisioning mode, if any, we're running under.
PPSType.UNKNOWN is when the reprovisioning marker is found and we
do not have the context to know what the original mode was. In this
scenario, we must resort to polling for reprovision data.
Tests:
Introduce a simple data source fixture to for fine-grain
control of mocking with pytest without unittest.
Migrate relevant _should_reprovision() tests into a combination of
TestDeterminePPSTypeScenarios cases.
Signed-off-by: Chris Patterson cpatterson@microsoft.com
|
|
|
|
LP: #1959149
|
|
When obtaining information from "ip addr", default to using
"ip --json addr" rather than using regex to parse "ip addr show"
as json is machine readable as less prone to error.
Deprecate but leave fallback to use "ip addr" for older iproute2
tooling which does not support --json param.
Fix regex parsing of "ip addr" to support peer addresses and
metrics.
|
|
Signed-off-by: Louis Sautier <sautier.louis@gmail.com>
|
|
According to the documentation in the tests:
```
We expect 3 calls to report_failure_to_fabric,
because we try 3 different methods of calling report failure.
The different methods are attempted in the following order:
1. Using cached ephemeral dhcp context to report failure to Azure
2. Using new ephemeral dhcp to report failure to Azure
3. Using fallback lease to report failure to Azure
```
Case 1 and 2 make sense. If networking is established, use it.
Should failure occur using current network configuration, retry
with fresh DHCP.
Case 3 suggests that we can fall back to a lease file and retry.
Given that:
1. The wireserver address has never changed to date.
2. The wireserver address should be in the DHCP lease.
3. Parsing the lease file does not improve connectivity over the
prior attempts.
...we can safely remove this case without regression.
Signed-off-by: Chris Patterson <cpatterson@microsoft.com>
|
|
Avoid requirement of getattr() and ensure _ephemeral_dhcp_ctx isn't
persisted in the cache.
Signed-off-by: Chris Patterson cpatterson@microsoft.com
|
|
load_azure_ds_dir() always returns a tuple. Instead of saving this
tuple as ret, expand it immediately as md, userdata_raw, cfg, files.
This allows for more fine-grained passing of data before getting
expanded later.
- Update _should_reprovision methods to use cfg instead of tuple.
- Update _should_reprovision methods to remove the ovf_md guard.
This should be a safe refactor as the OVF is not required, and the
config is initialized to an empty dict. In practice, a mount failure
would have initialized ret anyways if the OVF was not found. If a
mount failure wasn't seen and ret was None, this guard could be
causing other failures by ignoring the PPS state that should be
available from IMDS metadata.
Signed-off-by: Chris Patterson <cpatterson@microsoft.com>
|
|
We were seeing issues where if anything showed up before the
expected first adapter, booting could fail. This switches to seeking
for a working interface to handle edge cases.
Also fixes region code handling.
|
|
snapd currrently looks for 'not run' from cloud-init status[1].
Avoid changing this behavior and revert "not-run" value to
"not run".
This avoids having to get snapd to change implementation and
release updates as far back as Bionic to handle a hyphenated
not-run string.
[1]: https://github.com/snapcore/snapd/blob/master/sysconfig/\
cloudinit.go#L802
|
|
The if-statement set ovf_is_accessible to True if the OVF is read
from /dev/sr0, but not from other data sources. It defaults to
True, but may get flipped to False while processing an invalid
source, and never get set back to True when reading from the data
directory.
Instead, default ovf_is_accessible to False, and only set it to
True once we've read an OVF successfully (and end the search).
This fixes an error when OVF is read from data_dir and IMDS
data is unavailable (failing with "No OVF or IMDS available").
Signed-off-by: Chris Patterson <cpatterson@microsoft.com>
|
|
- Update EphemeralDHCPv4WithReporting to subclass EphemeralDHCPv4 for
consistency (non-functional change).
- Replace all usage of EphemeralDHCPv4 with EphemeralDHCPv4WithReporting.
- Converging to one DHCP class exposed an issue with ExitStack patches
being mixed with decorators. Specifically, it appeared that tests
that did not enable azure.EphemeralDHCPv4WithReporting mocks had it
applied anyways from previous tests.
Presumably ExitStack was overwriting the actual value with the
mock provided by the decorator? For now, remove some mock patches
that trigger failures, but future work should move towards a
consistent approach to prevent undetected effects.
Signed-off-by: Chris Patterson <cpatterson@microsoft.com>
|
