| Age | Commit message (Collapse) | Author |
|---|
|
Since 94838def772349387e16cc642b3642020e22deda, CloudInit supports NetBSD
too.
|
|
Add support for the NetBSD Operating System.
Features in this branch:
* Add BSD distro parent class from which NetBSD and FreeBSD can
specialize
* Add *bsd util functions to cloudinit.net and cloudinit.net.bsd_utils
* subclass cloudinit.distro.freebsd.Distro from bsd.Distro
* Add new cloudinit.distro.netbsd and cloudinit.net.renderer for
netbsd
* Add lru_cached util.is_NetBSD functions
* Add NetBSD detection for ConfigDrive and NoCloud datasources
This branch has been tested with:
- NoCloud and OpenStack (with and without config-drive)
- NetBSD 8.1. and 9.0
- FreeBSD 11.2 and 12.1
- Python 3.7 only, because of the dependency oncrypt.METHOD_BLOWFISH.
This version is available in NetBSD 7, 8 and 9 anyway
|
|
Cloud-config userdata provided as jinja templates are now distro,
platform and merged cloud config aware. The cloud-init query command
will also surface this config data.
Now users can selectively render portions of cloud-config based on:
* distro name, version, release
* python version
* merged cloud config values
* machine platform
* kernel
To support template handling of this config, add new top-level
keys to /run/cloud-init/instance-data.json.
The new 'merged_cfg' key represents merged cloud config from
/etc/cloud/cloud.cfg and /etc/cloud/cloud.cfg.d/*.
The new 'sys_info' key which captures distro and platform
info from cloudinit.util.system_info.
Cloud config userdata templates can render conditional content
based on these additional environmental checks such as the following
simple example:
```
## template: jinja
#cloud-config
runcmd:
{% if distro == 'opensuse' %}
- sh /custom-setup-sles
{% elif distro == 'centos' %}
- sh /custom-setup-centos
{% elif distro == 'debian' %}
- sh /custom-setup-debian
{% endif %}
```
To see all values: sudo cloud-init query --all
Any keys added to the standardized v1 keys are guaranteed to not
change or drop on future released of cloud-init. 'v1' keys will be retained
for backward-compatibility even if a new standardized 'v2' set of keys
are introduced
The following standardized v1 keys are added:
* distro, distro_release, distro_version, kernel_version, machine,
python_version, system_platform, variant
LP: #1865969
|
|
Allow disabling cloud-init's network configuration via a plain-text kernel cmdline
Cloud-init docs indicate that users can disable cloud-init networking via kernel
command line parameter 'network-config=<YAML>'. This does not work unless
the <YAML> payload base64 encoded. Document the base64 encoding
requirement and add a plain-text value for disabling cloud-init network config:
network-config=disabled
Also:
- Log an error and ignore any plain-text network-config payloads that are
not specifically 'network-config=disabled'.
- Log a warning if network-config kernel param is invalid yaml but do not
raise an exception, allowing boot to continue and use fallback networking.
LP: #1862702
|
|
|
|
one line doc fix
|
|
In cloud-init 19.2, we added the ability for cloud-init to detect
OpenStack platforms by checking for "OpenStack Compute" or "OpenStack
Nova" in the chassis asset tag. However, this was never reflected
in the documentation. This patch updates the datasources documentation
for OpenStack to reflect the possibility of using the chassis asset tag.
LP: #1669875
|
|
|
|
fixes typo at doc/examples/cloud-config-disk-setup.txt; Cavaut => Caveat
|
|
Co-Authored-By: Daniel Watkins <daniel@daniel-watkins.co.uk>
|
|
Other options near it use the non-default value, so the inconsistency
has lead to confusion for readers.
|
|
LP: #1852456
|
|
cloud-init has moved to cc_snap module and a top-level
config key 'snap'. cc_snap_config was deprecated in
cloud-init version 18.2
Co-authored-by: Daniel Watkins <daniel@daniel-watkins.co.uk>
|
|
docs: add initial troubleshooting to FAQ
|
|
* freebsd: introduce the freebsd renderer
Refactoring of the FreeBSD code base to provide a real network renderer
for FreeBSD.
Use the generic update_sysconfig_file() from rhel_util to handle the
access to /etc/rc.conf.
Interfaces are not automatically renamed by FreeBSD using
the following configuration in /etc/rc.conf:
```
ifconfig_fxp0_name="eth0"
```
* freesd: use regex named groups
Reduce the complexity of `get_interfaces_by_mac_on_freebsd()` with
named groups.
* freebsd: breaks up _write_network() in tree small functions
- `_write_ifconfig_entries()`
- `_write_route_entries()`
- `_write_resolve_conf()`
* extend find_fallback_nic() to support FreeBSD
this uses `route -n show default` to find the default interface
* freebsd: use dns keys from NetworkState class
The NetworkState class (settings instance) exposes the DNS configuration
in two keys:
- `dns_nameservers`
- `dns_searchdomains`
On OpenStack, these keys are set when a global DNS server is set. The
alternative is the `dns_nameservers` and `dns_search` keys from each
subdomain. We continue to read those.
* freebsd: properly target the /etc/resolv.conf file
* freebsd: ignore 'service routing restart' ret code
On FreeBSD 10, the restart of routing and dhclient is likely to fail because
- routing: it cannot remove the loopback route, but it will still set up
the default route as expected.
- dhclient: it cannot stop the dhclient started by the netif service.
In both case, the situation is ok, and we can proceed.
* freebsd: handle case when metadata MAC local locally
Handle the case where the metadata configuration comes with a MAC that
does not exist locally.
See:
- https://github.com/canonical/cloud-init/pull/61/files/635ce14b3153934ba1041be48b7245062f21e960#r359600604
- https://github.com/canonical/cloud-init/pull/61/files/635ce14b3153934ba1041be48b7245062f21e960#r359600966
* freebsd: show up a warning if several subnet found
The FreeBSD provider currently only allow one subnet per interface.
* freebsd: honor the target parameter in _write_network
* freebsd: log when a bad route is found
* freebsd: pass _postcmds to start_services()
* freebsd: updatercconf() is depercated
Replace `updatercconf()` by `rhel_util.update_sysconfig_file()`.
* freebsd: ensure gateway is ipv4 before using it
With the legacy ENI format, an IPv6 gateway may be pushed. This instead
of the expected IPv4.
* freebsd: find_fallback_nic, support FB10
On FreeBSD <= 10, `ifconfig -l` ignores the down interfaces.
* freebsd: use util.target_path() to load resolv.conf
Ensure we access `/etc/resolv.conf`, not `etc/resolv.conf`.
* freebsd: skip subnet without netmask
Those are likely to be either invalid of in IPv6 format. IPv6 support
will be addressed later in a new patchset.
* freebsd: get_devicelist returns netif list
Ensure `get_devicelist()` returns the list of known netif on FreeBSD.
* replace rhel_util.update_sysconfig_file wrapper call, with a wrapper function
* reverse if condition to remove an indent
Co-authored-by: Igor Galić <me+github@igalic.co>
|
|
* cc_snappy: remove deprecated module
* cloud_tests: remove cc_snappy tests (and references)
This module was deprecated in favor of cc_snap in cloud-init v.18.2
|
|
* cc_ssh: fix capitalisation of SSH
* doc: fix capitalisation of SSH
* cc_keys_to_console: fix capitalisation of SSH
* ssh_util: fix capitalisation of SSH
* DataSourceIBMCloud: fix capitalisation of SSH
* DataSourceAzure: fix capitalisation of SSH
* cs_utils: fix capitalisation of SSH
* distros/__init__: fix capitalisation of SSH
* cc_set_passwords: fix capitalisation of SSH
* cc_ssh_import_id: fix capitalisation of SSH
* cc_users_groups: fix capitalisation of SSH
* cc_ssh_authkey_fingerprints: fix capitalisation of SSH
|
|
- Added RbxCloud
- Sorted alphabetically
|
|
|
|
More clearly differentiate between the primary apt repo configuration
and any 3rd party apt configuration.
LP: #1832823
|
|
LP: #1846524
|
|
|
|
|
|
|
|
|
|
|
|
|
|
doc8 does not know about the ephasize-lines portion of code-block and
throws an error. As this is the only place right now I am going to
remove it untill we can find a better solution. rstcheck and
restructuredtext-lint have issues with sphinx declaritives, so
doc8 is still the best to use for now.
|
|
* docs: Add security.md to readthedocs
This enables the ability to show the security policy on both GitHub and
on the readthedocs site. To do this, enable the ability to import
Markdown based files and translate them to rst.
* Add doc-requirements.txt and update tox to use
Also removes the extra, uncessary extension addition of .md
|
|
Added Azure to cloud tests supporting upstream integration testing.
Implement the inherited platform classes, Azure configurations
to release/platform, and docs on how to run Azure CI.
|
|
Update ConfigDrive datasource documentation to point to the most recent
OpenStack documentation for ConfigDrive.
LP: #1852461
|
|
- rtd/index.rst: update sentence to read:
cloud-init will also parse and process any optional user data
- rtd/topics/datasources/rbxcloud.rst: fix rst link names to build
docs
- README.md:
- update travis badge url to project home: github/canonical/cloud-init
- update page title to:
Cloud-init official project upstream as of 11/2019
|
|
|
|
This patch enables control over SSH public-key import and
discarding supplied user-data (both disabled by default).
allow-userdata: false
ssh:
allow_public_ssh_keys: false
This feature enables closed appliances to prevent customers
from unintentionally breaking the appliance which were
not designed for user interaction.
The downstream change for this is here:
https://github.com/delphix/cloud-init/pull/4
|
|
The Azure datasource was incorrectly listing the IP address. This
updates the address to match what is in the Azure provided IMDS
documentation.
LP: #1849508
|
|
e24cloud provides an EC2 compatible datasource.
This just identifies their platform based on dmi 'system-vendor'
having 'e24cloud'. https://www.e24cloud.com/en/ .
Updated chassis typo in zstack unit test docstring.
LP: #1696476
|
|
|
|
Resolve the following lints raised by 'make doc':
- doc/rtd/topics/datasources/zstack.rst:5: D001 Line too long
- doc/rtd/topics/datasources/zstack.rst:10: D001 Line too long
|
|
Zstack platform provides a AWS Ec2 metadata service, and
identifies their platform to the guest by setting the 'chassis asset tag'
to a string that ends with '.zstack.io'.
LP: #1841181
|
|
|
|
This is formerly the capabilities page.
|
|
|
|
The huge table was scrolling off the page for me and it made more sense
to break this up and have sections for each item anyway.
|
|
|
|
|
|
Takeover the moreinfo.rst page and update initially with pages
a user can use to learn about cloud-init. For now, other docs
and presentations about cloud-init.
Goal is to use this page to collect very commonly asked questions.
|
|
|
|
* Create makefile and tox targets for documentation building and testing
to better replicate the live web docs using the same theme.
* Created docs.rst to explain how to build and contribute to documentation
with style guide and tips.
* doc/rtd/conf.py:
* Add copyright to rtd config
* Use Sphinx's RTD theme to replicate actual docs
|
|
|
|
|
