| Age | Commit message (Collapse) | Author |
|---|
|
This takes the same basic check that is in ds-identify. If the
DMI system manufacturer (aka sys_vendor) is not 'Hetzner', then exit
out of the datasource's get_data quickly.
|
|
This just got missed in the IBMCloud datasource addition.
Add it to the builtin list of datasources.
|
|
This adds a specific IBM Cloud datasource.
IBM Cloud is identified by:
a.) running on xen
b.) one of a LABEL=METADATA disk or a LABEL=config-2 disk with
UUID=9796-932E
The datasource contains its own config-drive reader that reads
only the currently supported portion of config-drive needed for
ibm cloud.
During the provisioning boot, cloud-init is disabled.
See the docstring in DataSourceIBMCloud.py for more more information.
|
|
Reducing timeout to 1 second as IMDS responds within a handful
of milliseconds. Also get rid of max_retries to prevent exiting
out of polling loop early due to IMDS outage / upgrade.
Reduce Azure PreProvisioning HTTP timeouts during polling to
avoid waiting an extra minute.
LP: #1752977
|
|
OpenNebulaNetwork.gen_conf() was previously returning ENI format.
This is updated to return netplan/v2 config.
The changes here also adds support for IPv6 configuration distributed
from OpenNebula and fixes some issues about nameserver information.
|
|
The Hetzner Cloud metadata service is an AWS-style service available
over HTTP via the link local address 169.254.169.254.
https://hetzner.com/cloud
https://docs.hetzner.cloud/
|
|
LP: #1754495
|
|
Last set of changes to GCE datasource broke reading of user-data
unless the user had base64 encoded their user-data and also set
user-data-encoding to 'base64'.
This fixes the issue.
LP: #1752711
|
|
Fix an issue in EC2 where the datasource.identity had not been
initialized before being used when restoring datasource from pickle.
This is exposed in upgrade and reboot path.
LP: #1748354
|
|
This change will enable azure vms to report provisioning has completed
twice, first to tell the fabric it has completed then a second time to
enable customer settings. The datasource for the second provisioning is
the Instance Metadata Service (IMDS),and the VM will poll indefinitely for
the new ovf-env.xml from IMDS.
This branch introduces EphemeralDHCPv4 which encapsulates common logic
used by both DataSourceEc2 an DataSourceAzure for temporary DHCP
interactions without side-effects.
LP: #1734991
|
|
Network configuration in OpenNebula would only work if the host correctly
guessed the names of the devices in the guest. OpenNebula provided data
in its context.sh like 'ETH0_NETWORK', but if the guest named devices
differently then results were not predictable. This would occur with
Predictable Network Interface Names. To address this,
newer versions (of OpenNebula provide the mac address ETH0_MAC.
This function is present in 4.14 and documented officially in 5.0 docs.
This provides support for reading the mac addresses from the context.sh.
It also fixes cases where context.sh provided a field (ETH0_NETWORK
or ETH0_MASK) with a empty string. Previously the empty string would
be used rather than falling back to the default.
LP: #1719157, #1716397, #1736750
|
|
The previous commit added a test that would attempt to create and use
/run/cloud-init/. This just modifies it to use a temp dir instead.
|
|
The behavior changes and improvements include:
- Only import keys into the default user that contain the name of the
default user ('ubuntu', or 'centos') or that contain 'cloudinit'.
- Use instance or project level keys based on GCE convention.
- Respect expiration time when keys are set.
Do not import expired keys.
- Support ssh-keys in project level metadata (the GCE default).
As part of this change, we also update the request header when talking
to the metadata server based on the documentation:
https://cloud.google.com/compute/docs/storing-retrieving-metadata#querying
LP: #1670456, #1707033, #1707037, #1707039
|
|
New mkfs.vfat and fatlabel tools included in the dosfsutils package no
longer support creating vfat disks with lowercase labels. They silently
default to an all uppercase label eg CONFIG-2 instead of config-2. This
change makes cloud-init handle either upper or lower case.
LP: #1598783
|
|
This stores a hash of the OAuth tokens as an 'id' for the maas
datasource. Since new instances get new tokens created and those tokens
are written by curtin into datasource system config this will provide
a way to identify a new "instance" (install).
LP: #1712680
|
|
This fixes a traceback when attempting to bounce the network after
hostname resets.
In artful and bionic ifupdown package is no longer installed in default
cloud images. As such, Azure can't use those tools to bounce the network
informing DDNS about hostname changes. This doesn't affect DDNS updates
though because systemd-networkd is now watching hostname deltas and with
default behavior to SendHostname=True over dhcp for all hostname updates
which publishes DDNS for us.
LP: #1722668
|
|
The instance identity document is a better source for region information,
partly because region isn't actually in meta-data at all, only
availability-zone, which happens to be named similarly.
Reviewed-by: Ethan Faust <efaust@amazon.com>
Reviewed-by: Cyle Riggs <cyler@amazon.com>
Reviewed-by: Tom Kirchner <tjk@amazon.com>
Reviewed-by: Matt Nierzwicki <nierzwic@amazon.com>
[ajorgens@amazon.com: rebase onto 0.7.9]
[ajorgens@amazon.com: changes per merge proposal discussions]
|
|
Make sure that some temporary files used by the config drive tests get
cleaned up properly.
|
|
In the VMware customization workflow, we have some options for the user
to upload scripts for additional customization. Based on user request,
those custom scripts can be either run before regular customization or
after. For post customization scripts, we decide whether to run the scripts
just after customization or post system reboot.
|
|
The motivation for this is that
a.) 1.7.1 runs with python 3.6 (bionic)
b.) we want to run pylint on tests/ and tools for the same reasons
that we want to run it on cloudinit/
The changes are described below.
- Update tox.ini to invoke pylint v1.7.1.
- Modify .pylintrc generated-members ignore mocked object members (m_.*)
- Replace "dangerous" params defaulting to {}
- Fix up cloud_tests use of platforms
- Cast some instance objects to with dict()
- Handle python2.7 vs 3+ ConfigParser use of readfp (deprecated)
- Update use of assertEqual(<boolean>, value) to assert<Boolean>(value)
- replace depricated assertRegexp -> assertRegex
- Remove useless test-class calls to super class
- Assign class property accessors a result and use it
- Fix missing class member in CepkoResultTests
- Fix Cheetah test import
|
|
Each DataSource subclass must define its own get_data method. This branch
formalizes our DataSource class to require that subclasses define an
explicit dsname for sourcing cloud-config datasource configuration.
Subclasses must also override the _get_data method or a
NotImplementedError is raised.
The branch also writes /run/cloud-init/instance-data.json. This file
contains all meta-data, user-data and vendor-data and a standardized set
of metadata keys in a json blob which other utilities with root-access
could make use of. Because some meta-data or user-data is potentially
sensitive the file is only readable by root.
Generally most metadata content types should be json serializable. If
specific keys or values are not serializable, those specific values will
be base64encoded and the key path will be listed under the top-level key
'base64-encoded-keys' in instance-data.json. If json writing fails due to
other TypeErrors or UnicodeDecodeErrors, a warning log will be emitted to
/var/log/cloud-init.log and no instance-data.json will be created.
|
|
There is a race condition where our sandboxed dhclient properly writes a
lease file but has not yet written a pid file. If the sandbox temporary
directory is torn down before the dhclient subprocess writes a pidfile
DataSourceEc2Local gets a traceback and the instance will fallback to
DataSourceEc2 in the init-network stage. This wastes boot cycles we'd
rather not spend.
Fix handling of sandboxed dhclient to wait for both pidfile and leasefile
before proceding. If either file doesn't show in 5 seconds, log a warning
and return empty lease results {}.
LP: #1735331
|
|
If user upgraded to new cloud-init and attempted to run 'cloud-init init'
without rebooting, cloud-init restores the datasource object from pickle.
The older version pickled datasource object had no value for
_network_config or fallback_nic. This caused the Ec2 datasource to attempt
to reconfigure networking with a None fallback_nic. The pickled object
also cached an older version of ec2 metadata which didn't contain network
information.
This branch does two things:
- Add a fallback_interface property to DatasourceEC2 to support reading the
old .fallback_nic attribute if it was set. New versions will
call net.find_fallback_nic() if there has not been one found.
- Re-crawl metadata if we are on Ec2 and don't have a 'network' key in
metadata
LP: #1732917
|
|
VPC instances have the option to specific local only IPv4 addresses. Allow
Ec2Datasource to enable dhcp4 on instances even if local-ipv4s is
configured on an instance.
Also limit network_configuration to only the primary (fallback) nic.
LP: #1728152
|
|
Systems that used systemd-networkd's dhcp client would not be able to get
information on the Azure endpoint (placed in Option 245) or the CloudStack
server (in 'server_address').
The change here supports reading these files in /run/systemd/netif/leases.
The files declare that "This is private data. Do not parse.", but at this
point we do not have another option.
LP: #1718029
|
|
Previously we had hard coded paths in /sbin for the udevadm and modprobe
programs invoked by AltCloud. Its more flexible to expect the PATH to
be set correctly.
Debian: #852564
|
|
DataSourceOVF attempts to find iso files via walking os.listdir('/dev/')
which is far too wide. This approach is too invasive and can sometimes
race with systemd attempting to fsck and mount devices.
Instead, utilize cloudinit.util.find_devs_with to filter devices by
criteria (which uses blkid under the covers). This results in fewer
attempts to mount block devices which do not contain iso filesystems.
Unittest changes include:
- cloudinit.tests.helpers; introduce add_patch() helper
- Add unittest coverage for DataSourceOVF use of transport_iso9660
LP: #1718287
|
|
This regressed in the rework of GCE datasource to have a main.
The fix really just stores the user-data that was read in
self.userdata_raw, rather than self.userdata. That is consistent
with other datasources and ulitimately how it was before the refactor.
The main is updated to address the fact that user-data is binary data
and may not be able to be printed.
LP: #1717598
|
|
A regression in 'get_latest_lease' made it ignore files starting with
'dhclient-' rather than just 'dhclient.'. The fix here is to allow those
files to be considered.
There is a lot more we could do here to better ensure that we pick the
most recent lease, but this change fixes the regression.
LP: #1717147
|
|
This change makes the DataSourceEc2Local do nothing unless it is on
actual AWS platform. The motivation is twofold:
a.) It is generally safer to only make this function available to Ec2
clones that explicitly identify themselves to the guest. (It also
gives them a reason to supply identification code to cloud-init.)
b.) On non-intel OpenStack platforms ds-identify would enable both the Ec2
and OpenStack sources. That is because there is not good data (such as
dmi) to positively identify the platform. Previously that would be fine
as OpenStack would run first and be successful. The change to add Ec2Local
meant that an Ec2 now runs first.
The best case for 'b' would be a slow down as attempts at the Ec2 metadata
service time out. The discovered case was worse.
Additionally we add a simple check for datatype of 'network' in the
metadata before attempting to read it.
LP: #1715128
|
|
During boot, the usage of /tmp is not safe. In systemd systems,
systemd-tmpfiles-clean may run at any point and clear out a temp file
while cloud-init is using it. The solution here is to use
/run/cloud-init/tmp.
LP: #1707222
|
|
This missed mock in test_openstack resulted in a costly unit test timeout.
LP: #1714376
|
|
This moves the base test case classes into into cloudinit/tests and
updates all the corresponding imports.
|
|
DataSourceEc2 behavior changed to first check a minimum acceptable
metadata version uri http://169.154.169.254/<min_version>/instance-id,
retrying on 404, until the metadata service is available. After the
metadata service is up, the datasource inspects preferred
extended_metadata_versions for availability. Unit tests only mocked the
preferred extended_metadata_version so all Ec2 tests were retrying
attempts against
http://169.254.169.254/meta-data/<min-version>/instance-id adding a lot of
time cost to the unit test runs.
This branch uses httpretty to properly mock the following:
- 404s from metadata on undesired extended_metadata_version test routes
- https://169.254.169.254/meta-data/2016-09-02/instance-id
- full metadata dictionary represented on min_metadata_version
- https://169.254.169.254/meta-data/2016-09-02/*
The branch also tightens httpretty to raise a MockError for any URL which
isn't mocked via httpretty.HTTPretty.allow_net_connect=False.
LP: #1714117
|
|
DataSourceEc2 now parses the metadata for each nic to determine if
configured for ipv6 and/or ipv4 addresses. In AWS for metadata version
2016-09-02, nics configured for ipv4 or ipv6 addresses will have non-zero
values stored in metadata at network/interfaces/macs/<MAC>/public-ipv4 or
ipv6s respectively. Those metadata files are only non-zero when an ipv4 or
ipv6 ip is associated to the specific nic. A new
DataSourceEc2.network_config property is added which parses the metadata
and renders a network version 1 dictionary representing both dhcp4 and
dhcp6 configuration for associated nics.
The network configuration returned from the datasource will also 'pin' the
nic name to the name presented on the instance for each nic.
LP: #1639030
|
|
This branch is a prerequisite for IPv6 support in AWS by allowing Ec2
datasource to query the metadata source version 2016-09-02 about whether
or not it needs to configure IPv6 on interfaces. If version 2016-09-02
is not present, fallback to the min_metadata_version of 2009-04-04. The
DataSourceEc2Local not run on FreeBSD because dhclient in doesn't
support the -sf flag allowing us to run dhclient without filesystem
side-effects.
To query AWS' metadata address @ 169.254.169.254, the instance must have
a dhcp-allocated address configured. Configuring IPv4 link-local
addresses result in timeouts from the metadata service. We introduced a
DataSourceEc2Local subclass which will perform a sandboxed dhclient
discovery which obtains an authorized IP address on eth0 and crawl
metadata about full instance network configuration.
Since ec2 IPv6 metadata is not sufficient in itself to tell us all the
ipv6 knownledge we need, it only be used as a boolean to tell us which
nics need IPv6. Cloud-init will then configure desired interfaces to
DHCPv6 versus DHCPv4.
Performance side note: Shifting the dhcp work into init-local for Ec2
actually gets us 1 second faster deployments by skipping init-network
phase of alternate datasource checks because Ec2Local is configured in
an ealier boot stage. In 3 test runs prior to this change: cloud-init
runs were 5.5 seconds, with the change we now average 4.6 seconds.
This efficiency could be even further improved if we avoiding dhcp
discovery in order to talk to the metadata service from an AWS
authorized dhcp address if there were some way to advertize the dhcp
configuration via DMI/SMBIOS or system environment variables.
Inspecting time costs of the dhclient setup/teardown in 3 live runs the
time cost for the dhcp setup round trip on AWS is:
test 1: 76 milliseconds
dhcp discovery + metadata: 0.347 seconds
metadata alone: 0.271 seconds
test 2: 88 milliseconds
dhcp discovery + metadata: 0.388 seconds
metadata alone: 0.300 seconds
test 3: 75 milliseconds
dhcp discovery + metadata: 0.366 seconds
metadata alone: 0.291 seconds
LP: #1709772
|
|
EC2 was the original, but this adds some initial tests for that datasource.
Also updates a docstring for an internal method.
|
|
Here we add and enable by default a datasource for Scaleway cloud.
The datasource quickly exits unless one of three things:
a.) 'Scaleway' found as the system vendor
b.) 'scaleway' found on the kernel command line.
c.) the directory /var/run/scaleway exists (this is currently created
by the scaleway initramfs module).
One interesting bit of this particular datasource is that it requires
the source port of the http request to be < 1024.
|
|
The usage of mock in this test was simply invalid and only worked by
happenstance.
|
|
The mock of platform_reports_gce is created with a True return value in
tests/unittests/test_datasource/test_gce.py:TestDataSourceGCE.setUp().
But, the final test_get_data_returns_false_if_not_on_gce incorrectly
attempts to override the mocked return_value of True to False by setting
self.m_platform_gce.return_value = False. But, since the mock is already
initialized, the updated False is not honored. Instead we should use the
patch decorator on the specific unit test to override the return_value of
DataSourceGCE.platform_reports_gce to False.
A False from platform_reports_gce allows DataSourceGCE.get_data to
immediately return False instead of trying to contact
metadata.google.internal as the related bug references.
|
|
On systems with network devices with duplicate mac addresses, cloud-init
will fail to rename the devices according to the specified network
configuration. Refactor net layer to search by device driver and device
id if available. Azure systems may have duplicate mac addresses by
design.
Update Azure datasource to run at init-local time and let Azure datasource
generate a fallback networking config to handle advanced networking
configurations.
Lastly, add a 'setup' method to the datasources that is called before
userdata/vendordata is processed but after networking is up. That is
used here on Azure to interact with the 'fabric'.
|
|
The previous commit caused test failure.
This separates out _check_freebsd_cdrom and mocks it in a test
rather than patching open.
|
|
The current method is to attempt to mount the cdrom (/dev/cd0), if it is
successful, /dev/cd0 is configured, otherwise, it is not configured. The
problem is it forgets to check whether the mounting destination folder is
created or not. As a result, mounting attempt failed even if cdrom is
ready.
LP: #1696295
|
|
Unix file modes are usually represented as octal, but they were being
interpreted as decimal, for example 0o644 would be printed as '420'.
Reviewed-by: Tom Kirchner <tjk@amazon.com>
|
|
Azure sets a known chassis asset tag to 7783-7084-3265-9085-8269-3286-77.
We can inspect this in both ds-identify and DataSource.get_data to
determine whether we are on Azure.
Added unit tests to cover these changes
and some minor tweaks to Exception error message content to give more
context on malformed or missing ovf-env.xml files.
LP: #1693939
|
|
AliYun cloud platform is now identifying themselves by setting the dmi
product id to the well known value "Alibaba Cloud ECS". The changes here
identify that properly in tools/ds-identify and in the DataSourceAliYun.
Since the 'get_data' for AliYun now identifies itself correctly, we can
enable AliYun by default.
LP: #1638931
|
|
Per the documentation at
https://cloud.google.com/compute/docs/storing-retrieving-metadata
The instance-level SSH key was named 'sshKeys' and now is 'ssh-keys'.
The project-level SSH key attribute has not changed so is intentionally
not changed here.
LP: #1693582
|
|
python2.6 unittest.TestCase does not have the assertIsNone or
assertIsNotNone. We just have to explicitly use the unittest2
version, which we get from helpers.
The desire to use assertIsNone comes from flake8 (through hacking,
I believe).
Also, fix "{}.format('foo')" which is not valid in python2.6.
|
|
This just moves flake8 and related tools up to newer versions and fixes
the complaints associated with that.
We added to the list of flake8 ignores:
H102: do not put vim info in source files
H304: no relative imports
Also updates and pins the following in the flake8 environment:
pep8: 1.7.0 => drop (although hacking still pulls it in).
pyflakes 1.1.0 => 1.5.0
hacking 0.10.2 => 0.13.0
flake8 2.5.4 => 3.3.0
pycodestyle none => 2.3.1
|
|
Previously, the datasource for DigitalOcean allowed for a gateway on each
NIC. As a result, on Ubuntu 16.04, networking.service was broken. For
17.04 and later, Ubuntu _replaces_ the default gateway with the second
gateway on 'ifup' after reboot.
DigitalOcean is looking at changing the meta-data, however, this will
result in another version of the meta-data JSON.
LP: #1681531.
|
