| Age | Commit message (Collapse) | Author |
|---|
|
Kernel's newer than 4.15 present /sys/dmi/id/product_uuid as a
lowercase value. Previously UUID was uppercase.
Azure datasource reads the product_uuid directly as their platform's
instance-id. This presents a problem if a kernel is either
upgraded or downgraded across the 4.15 kernel version boundary because
the case of the UUID will change, resulting in cloud-init seeing a
"new" instance id and re-running all modules.
Re-running cc_ssh in cloud-init deletes and regenerates ssh_host keys
on a system which can cause concern on long-running instances that
somethingnefarious has happened.
Also add:
- An integration test for this for Azure Bionic Ubuntu FIPS upgrading from
a FIPS kernel with uppercase UUID to a lowercase UUID in linux-azure
- A new pytest.mark.sru_next to collect all integration tests related to our
next SRU
LP: #1835584
|
|
This allows out-of-date images to be brought up-to-date with the
archive, so that tests written against the latest cloud-init release
will pass.
|
|
Using the same MAC address results in strange test behaviour if more
than one such instance is up: traffic gets routed to an arbitrary
interface with the given MAC address. This can happen if running tests
in parallel, or on a system which retains test instances from previous
runs.
The introduction of tests/integration_tests/__init__.py means that
pylint now checks the integration tests: this commit also addresses
those failures.
|
|
|
|
Without a MAC address match clause, the test network configuration is
not applied to the primary interface in LXD VMs (which is named enp*s*
rather than eth0).
|
|
`test_seed_random_data.py` was failing on openstack as openstack
provides additional binary seed data to the end of the specified file.
The test has been changed to only read the ascii porition of
seed file.
|
|
|
|
New datasource utilizing UpCloud metadata API, including relevant unit
tests and documentation.
|
|
In LXD containers, the default interface is named eth0. In VMs, it
isn't; it's renamed by systemd (likely to enp5s0, but we can't rely on
that). This means that, on VMs, the network configuration we specify
for "eth0" doesn't match an interface in the system and so is not
applied.
This modifies the test to set a MAC address in a match clause in the
network configuration and on the eth0 interface (which is the LXD name
in both containers and VMs pre-rename): this ensures that the specified
configuration applies in both cases.
|
|
Add support for openstack's dynamic vendor data, which appears under openstack/latest/vendor_data2.json
This adds vendor_data2 to all pathways; it should be a no-op for non-OpenStack providers.
LP: #1841104
|
|
Since version 1.9.1, @includedir can be used in the sudoers files
instead of #includedir:
https://github.com/sudo-project/sudo/releases/tag/SUDO_1_9_1
Actually "@includedir" is the modern syntax, and "#includedir" the historic
syntax. It has been considered that "#includedir" was too puzzling because
it started with a "#" that otherwise denotes comments.
This happens to be the default in SUSE Linux enterprise sudoer package,
so cloudinit should take this into account.
Otherwise, cloudinit was adding an extra #includedir, which was
resulting on the files under /etc/sudoers.d being included twice, one by
@includedir from the SUSE package, one by the @includedir from
cloudinit. The consequence of this, was that if you were defining an
Cmnd_Alias inside any of those files, this was being defined twice and
creating an error when using sudo.
|
|
|
|
pycloudlib no longer raises exceptions when cloud-init fails to start,
and the API has been updated accordingly. Changes have been made to
integration tests accordingly
|
|
Stop requiring compartment_id for OCI and project_id for GCE since they
can now be inferred in pycloudlib.
|
|
The company name has two distinct words.
Signed-off-by: Dan Kenigsberg <danken@redhat.com>
|
|
Ubuntu cloud images ship /etc/cloud/build.info which includes a line
with the build serial used to identify the image:
serial: 20210108
This is valuable information when verifying Ubuntu issues (to confirm
that testing is happening against the expected image), but is also
useful when debugging test failures: manifests of all packages in (the
base) images can be found at http://cloud-images.ubuntu.com/
|
|
This reverts commit b0e73814db4027dba0b7dc0282e295b7f653325c.
|
|
This feature will modify VMware datasource to read from meta data and user data which are specified by VMware vSphere user. If meta data/user data are found in cloud-init configuration directory, datasource will parse the meta data/network and user data from the configuration file, otherwise it will continue to parse them from traditional customization configuration file as before. The supported meta data file is in json or yaml format.
|
|
Route '-net' parameter is incompatible with /32 IPv4 addresses so we
have to use '-host' in that case.
|
|
|
|
The documentation did not mention that the given data may not be the
exact string written: the cloud's random data may be added to it.
Additionally, the documentation of the command key was incorrect.
test_seed_random_data was updated to check that the given data is a
prefix of the written data, to match cloud-init's expected (and, now,
documented) behaviour.
LP: #1911227
|
|
LP: #1911230
|
|
|
|
With the changes for SSH public keys to be retrieved from IMDS as a
first option, when a key is passed through not in the raw SSH public key
format it causes an issue and the key is not added to the user's
authorized_keys file.
This PR will temporarily disable this behavior until a permanent fix is
put in place.
|
|
|
|
IPV6_AUTOCONF needs to be set to 'no' on RHEL so NetworkManager can
properly acquire ipv6 address.
rhbz: #1859695
Signed-off-by: Eduardo Otubo <otubo@redhat.com>
|
|
This introduces PUBLIC_SSH_KEY, to configure what public SSH key should
be used to access systems under test, and KEYPAIR_NAME, to configure the
name used in clouds for that SSH key (or the default SSH key, in
PUBLIC_SSH_KEY's absence).
|
|
|
|
This gives us more detailed integration testing output by default.
This will make debugging failures reported by users/developers easier to
debug, as it removes the need for an initial round-trip to get the
output we need for debugging. It will also make debugging intermittent
failures easier: there will definitely be log output from runs which
exhibit the intermittent failure.
|
|
This makes it easier to find the failure logs when you're running a
bunch of similar tests in parallel.
|
|
This fixes up an issue introduced in
54e202a6480e48dbb8a72004f7a5003f7c4edfae.
|
|
This refactors cc_ca_certs to support non-ca-certificates distros, and
adds RHEL support.
|
|
Prevent network interfaces without IP addresses from being added to the
generated network configuration.
|
|
On xenial, the bridge test fails because xenial's LXD doesn't include
the `network` subcommand. On bionic, the bridge test fails within
containers, because LXD isn't able to manipulate the host kernel as it
expects.
(focal and later do run successfully in containers, but we don't have a
good way of expressing that presently.)
|
|
This currently covers functionality added in #575
|
|
Ensure if wakeonlan is specified in the network config that it is
rendered in the /etc/network/interfaces or netplan config.
|
|
- workaround pad.lv/1908287 for restarting instances
- move wait param from launch_kwargs to launch call
- remove name param as it's not universally supported
- add platform to log names
|
|
|
|
|
|
Verify that if cloud-init is using DataSourceRbxCloud, there is
no traceback if the metadata disk cannot be found.
|
|
Verify that on Azure that if a default user and password are specified
through the Azure API that a change in the default password overwrites
the old password
|
|
Ensure gpg is called with --no-tty flag.
Also, refactored the "ordered_items_in_text" to assert if the line
is missing and provide a more useful error message.
|
|
integration_tests: add test for LP: #1898997
This introduces the `lxd_config_dict` mark, used to specify a
free-form configuration dict to LXD for tests which only run there; and
the `not_xenial` and `not_bionic` marks, used to skip tests on
xenial/bionic via a basic release skipping mechanism.
This also bumps the pycloudlib commit we depend upon, as
the latest commit includes the changes required for LXD network config
to work.
(The `lxd_config_dict` change further complicated `_client`, so a minor
refactoring is applied.)
|
|
Also introduce the `unstable` mark, to allow us to land tests which
run inconsistently (such as this one).
|
|
CA Cert tests will fail on systems that don't have ca-certificates
installed and configured.
Signed-off-by: Daniel Watkins <oddbloke@ubuntu.com>
Signed-off-by: Eduardo Otubo <otubo@redhat.com>
|
|
Add an integration test that roughly mimics many of the manual cloud
SRU tests. Also refactored some of the image setup code to make it
easier to use in non-fixture code.
|
|
Test that we can add optional vendor-data to the seedfrom file in a
NoCloud environment.
Also added the option to pass raise_on_cloudinit_failure through
an instance restart so we get automatic failure checking when
we need to manually reboot.
|
|
For SRU test development, every single time we start a new test run,
we need to first install the PROPOSED version and create an image
snapshot. Instead of automatically deleting a snapshot, add an
integration setting to allow us to keep the snapshot. The end of the
test run will log the image name which can then be used as the
OS_IMAGE in subsequent test runs.
|
|
If a non-default AuthorizedKeysFile is specified in
/etc/ssh/sshd_config, ensure we can still ssh as expected
|
|
This introduces an optional, more complex OS_IMAGE format (`<image
id>::<os>::<release>`) which allows the specification of the OS/OS
release which the given image ID corresponds to. This information is
used to skip tests which do not apply to the image.
This commit is comprised of the following discrete changes:
* introduce the IntegrationImage class, to handle parsing and storing
the new OS_IMAGE format
* support inferring the OS and OS release of Ubuntu series, so that we
can continue to set OS_IMAGE to just a series name and have test
skipping work
* add documentation on Image Selection to integration_tests.rst
* introduce the actual skipping behaviour based on OS marks
* apply the `ubuntu` mark to all tests that should be skipped on
non-Ubuntu operating systems
|
