docs: remove superfluous "vyos@vyos" prompt

4 files changed, 1 insertions, 46 deletions

diff --git a/docs/appendix/commandtree/configmode.rst b/docs/appendix/commandtree/configmode.rst
index 8d675f7e..e286e85f 100644
--- a/docs/appendix/commandtree/configmode.rst
+++ b/docs/appendix/commandtree/configmode.rst
@@ -259,8 +259,6 @@ Exiting from a configuration level:
 
   [edit interfaces ethernet eth0]
   vyos@vyos# exit
-  [edit]
-  vyos@vyos#
 
 Exiting from configuration mode:
 
@@ -285,8 +283,6 @@ Error message when trying to exit with uncommitted changes:
   vyos@vyos# exit
   Cannot exit: configuration modified.
   Use 'exit discard' to discard the changes and exit.
-  [edit]
-  vyos@vyos#
 
 
 Warning message when exiting with unsaved changes:
@@ -296,8 +292,6 @@ Warning message when exiting with unsaved changes:
   [edit]
   vyos@vyos# exit
   Warning: configuration changes have not been saved.
-  exit
-  vyos@vyos:~$
 
 Load
 ^^^^
@@ -358,8 +352,6 @@ In the example below exist a ``default-firewall.config`` file with some common f
   Loading configuration from '/config/default-firewall.config'...
 
   Merge complete.  Use 'commit' to make changes active.
-  [edit]
-  vyos@vyos#
 
   vyos@vyos# show firewall
   +all-ping enable
@@ -418,7 +410,6 @@ See here how to move the configuration entrys from vlanid 3 to 2
   -    address 10.4.4.4/32
   -}
   [edit interfaces ethernet eth1]
-  vyos@vyos#
 
 
 Rollback
@@ -439,8 +430,6 @@ Use the compare command to verify the configuration you want to rollback to.
   Broadcast message from root@vyos-1 (pts/0) (Tue Dec 17 21:07:45 2018):
 
   The system is going down for reboot NOW!
-  [edit]
-  vyos@vyos#
 
 Run
 ^^^
@@ -521,4 +510,4 @@ Show the hole config, the address and description of eth1 is moving to vlan 2 if
    service {
        ssh {
            port 22
-  ......
\ No newline at end of file
+  ......
diff --git a/docs/appendix/examples/ospf-unnumbered.rst b/docs/appendix/examples/ospf-unnumbered.rst
index ac29988e..923e0286 100644
--- a/docs/appendix/examples/ospf-unnumbered.rst
+++ b/docs/appendix/examples/ospf-unnumbered.rst
@@ -60,8 +60,6 @@ Results
   lo               127.0.0.1/8                       u/u
                    192.168.0.1/32
                    ::1/128
-  vyos@vyos:~$
-
 
 .. code-block:: console
 
@@ -82,8 +80,6 @@ Results
   C>* 192.168.0.1/32 is directly connected, lo, 00:57:36
   O>* 192.168.0.2/32 [110/1] via 192.168.0.2, eth1 onlink, 00:29:03
     *                        via 192.168.0.2, eth2 onlink, 00:29:03
-  vyos@vyos:~$
-
 
 - Router B:
 
@@ -99,8 +95,6 @@ Results
   lo               127.0.0.1/8                       u/u
                    192.168.0.2/32
                    ::1/128
-  vyos@vyos:~$
-
 
 .. code-block:: console
 
@@ -121,5 +115,3 @@ Results
   C>* 192.168.0.2/32 is directly connected, lo, 00:57:36
   O>* 192.168.0.1/32 [110/1] via 192.168.0.1, eth1 onlink, 00:29:03
     *                        via 192.168.0.1, eth2 onlink, 00:29:03
-  vyos@vyos:~$
-
diff --git a/docs/configuration-overview.rst b/docs/configuration-overview.rst
index bb8544d5..903dfba6 100644
--- a/docs/configuration-overview.rst
+++ b/docs/configuration-overview.rst
@@ -63,7 +63,6 @@ using the show configuration command.
           }
       }
   }
-  vyos@vyos:~$
 
 By default the configuration is displayed in a hierarchy like the example above,
 this is only one of the possible ways to display the configuration. When the
@@ -191,8 +190,6 @@ replacements and ``-`` for deletions.
   }
   loopback lo {
   }
- [edit]
- vyos@vyos#
 
 It is also possible to display all `set` commands within configuration mode
 using ``show | commands``
@@ -224,8 +221,6 @@ level.
   [edit]
   vyos@vyos# exit
   Warning: configuration changes have not been saved.
-  vyos@vyos:~$
-
 
 Managing
 ========
@@ -280,9 +275,6 @@ configuration mode.
   vyos@vyos# save
   Saving configuration to '/config/config.boot'...
   Done
-  [edit]
-  vyos@vyos#
-
 
 Configuration mode can not be exited while uncommitted changes exist. To exit
 configuration mode without applying changes, the exit discard command can be
@@ -295,8 +287,6 @@ used.
   Use 'exit discard' to discard the changes and exit.
   [edit]
   vyos@vyos# exit discard
-  exit
-  vyos@vyos:~$
 
 .. code-block:: console
 
@@ -333,7 +323,6 @@ Command completion and syntax help with ``?`` and ``[tab]`` will also work.
   ---------        ----------                        ---  -----------
   eth0             0.0.0.0/0                         u/u
 
-
 Archive
 =======
 
@@ -383,9 +372,6 @@ command:
       9	   2013-12-12 15:42:07 root by boot-config-loader
       10   2013-12-12 15:42:06 root by init
 
-  [edit]
-  vyos@vyos#
-
 Comparing Revisions
 ^^^^^^^^^^^^^^^^^^^
 
@@ -426,8 +412,6 @@ apply the selected revision and trigger a system reboot.
   Proceed with reboot? [confirm][y]
   Broadcast message from root@vyos-1 (pts/0) (Tue Dec 17 21:07:45 2013):
   The system is going down for reboot NOW!
-  [edit]
-  vyos@vyos#
 
 Configuring the archive size
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^
@@ -464,7 +448,6 @@ default one, you can enter the following command in configuration mode:
   load /opt/vyatta/etc/config.boot.default
 
 You will be asked if you want to continue. If you accept, you will have to use
-``commit`` if you want to make the changes active.
 
 Then you may want to ``save`` in order to delete the saved configuration too.
 
diff --git a/docs/install.rst b/docs/install.rst
index 07c3eb43..95edb539 100644
--- a/docs/install.rst
+++ b/docs/install.rst
@@ -181,9 +181,6 @@ To login to the system, use the default username and password will be: ``vyos``
   permitted by applicable law.
   vyos@vyos:~$
 
-  vyos@vyos:~$ uname -a
-  Linux vyos 4.19.79-amd64-vyos #23 SMP Mon Oct 1 17:29:22 CEST 2018 x86_64 GNU/Linux
-
 Unlike general purpose Linux distributions, VyOS uses "image installation" that
 mimics the user experience of traditional hardware routers and allows keeping
 multiple VyOS versions installed simultaneously. This makes it possible to
@@ -253,7 +250,6 @@ the provided default credentials.
 
   Setting up grub: OK
   Done!
-  vyos@vyos:~$
 
 After the installation is complete, remove the Live CD and reboot the system:
 
@@ -262,7 +258,6 @@ After the installation is complete, remove the Live CD and reboot the system:
   vyos@vyos:~$ reboot
   Proceed with reboot? (Yes/No) [No] Yes
 
-
 .. _PXE Install:
 
 PXE Install
@@ -307,8 +302,6 @@ In this example we configured an existent VyOS as the DHCP server:
            }
        }
    }
-  [edit]
-  vyos@vyos#
 
 .. _tftp-server:
 
@@ -339,8 +332,6 @@ In the example we configured our existent VyOS as the TFTP server too:
   vyos@vyos# show service tftp-server
    directory /config/tftpboot
    listen-address 192.168.1.50
-  [edit]
-  vyos@vyos#
 
 Example of the contents of the TFTP server: