cloud-init: correct syntax

2 files changed, 48 insertions, 38 deletions

diff --git a/docs/installation/cloud/cloud-init.md b/docs/installation/cloud/cloud-init.md
deleted file mode 100644
index 02e22408..00000000
--- a/docs/installation/cloud/cloud-init.md
+++ /dev/null
@@ -1,38 +0,0 @@
-.. _cloud-init: 
- 
-################################ 
-Configuring Vyos with cloud-init 
-################################ 
-
-Vyos uses cloud-init to configure itself automatically in cloud environments.
-
-There is a Meta-Data module `cc_vyos.py` that takes care of the cloud-specific configuration.
-
-Additional module `cc_vyos_userdata.py` introduces a new parameter `vyos_config_commands` into User-Data (`#cloud-config`). This parameter should be a list of VyOS configuration commands that will be applied during deployment. This module will run last.
-
-Commands requirements:
- - one command per line
- - if command ending by value, it must be inside single quotes: `set some option 'value'`, `delete some option 'value'`
- - a single-quote symbol is not allowed inside command or value
-The commands list produced by the `show configuration commands` command on a VyOS router should comply with all the requirements, so it is easy to get a proper commands list by copying it from another router.
-
-Usage example (User-Data content):
-```
-#cloud-config
-vyos_config_commands:
-  - set system host-name 'demo123'
-  - set system ntp server 1.pool.ntp.org
-  - set system ntp server 2.pool.ntp.org
-  - delete interfaces ethernet eth2 address
-  - set interfaces ethernet eth2 address '192.0.2.1/24'
-```
-
-
-References
-----------
-
-.. stop_vyoslinter
-
-https://github.com/vyos/vyos-cloud-init/commit/1607eec32641ad93ea211e447336b3366c28de06
-
-.. start_vyoslinter
diff --git a/docs/installation/cloud/cloud-init.rst b/docs/installation/cloud/cloud-init.rst
new file mode 100644
index 00000000..b9c1c415
--- /dev/null
+++ b/docs/installation/cloud/cloud-init.rst
@@ -0,0 +1,48 @@
+.. _cloud-init: 
+ 
+################################ 
+Configuring Vyos with cloud-init 
+################################ 
+
+Vyos uses cloud-init to configure itself automatically in cloud environments.
+There is a Meta-Data module ``cc_vyos.py`` that takes care of the
+cloud-specific configuration.
+
+Additional module ``cc_vyos_userdata.py`` introduces a new parameter
+``vyos_config_commands`` into User-Data (``#cloud-config``). This parameter
+should be a list of VyOS configuration commands that will be applied during
+deployment. This module will run last.
+
+Commands requirements:
+
+   * one command per line
+   * if command ending by value, it must be inside single quotes:
+     ``set some option 'value'``, ``delete some option 'value'``
+   * a single-quote symbol is not allowed inside command or value
+
+The commands list produced by the ``show configuration commands`` command on a
+VyOS router should comply with all the requirements, so it is easy to get a
+proper commands list by copying it from another router.
+
+Usage example (User-Data content):
+
+.. code-block::
+
+   #cloud-config
+   vyos_config_commands:
+   - set system host-name 'demo123'
+   - set system ntp server 1.pool.ntp.org
+   - set system ntp server 2.pool.ntp.org
+   - delete interfaces ethernet eth2 address
+   - set interfaces ethernet eth2 address '192.0.2.1/24'
+
+
+
+References
+----------
+
+.. stop_vyoslinter
+
+https://github.com/vyos/vyos-cloud-init/commit/1607eec32641ad93ea211e447336b3366c28de06
+
+.. start_vyoslinter