Merge pull request #1422 from srividya0208/fw_log

Modified old option from 'enable-default-log' to new one 'default-log'

5 files changed, 20 insertions, 20 deletions

diff --git a/docs/configexamples/zone-policy.rst b/docs/configexamples/zone-policy.rst
index 08db13b9..d9a6bf89 100644
--- a/docs/configexamples/zone-policy.rst
+++ b/docs/configexamples/zone-policy.rst
@@ -145,7 +145,7 @@ To add logging to the default rule, do:
 
 .. code-block:: none
 
-  set firewall name <ruleSet> enable-default-log
+  set firewall name <ruleSet> default-log
 
 
 By default, iptables does not allow traffic for established sessions to
@@ -251,7 +251,7 @@ Since we have 4 zones, we need to setup the following rulesets.
   Dmz-local
 
 Even if the two zones will never communicate, it is a good idea to
-create the zone-pair-direction rulesets and set enable-default-log. This
+create the zone-pair-direction rulesets and set default-log. This
 will allow you to log attempts to access the networks. Without it, you
 will never see the connection attempts.
 
@@ -261,7 +261,7 @@ This is an example of the three base rules.
 
   name wan-lan {
     default-action drop
-    enable-default-log
+    default-log
     rule 1 {
       action accept
       state {
@@ -285,7 +285,7 @@ Here is an example of an IPv6 DMZ-WAN ruleset.
 
   ipv6-name dmz-wan-6 {
     default-action drop
-    enable-default-log
+    default-log
     rule 1 {
       action accept
       state {
diff --git a/docs/configuration/firewall/bridge.rst b/docs/configuration/firewall/bridge.rst
index 9fb019c5..bba9e56f 100644
--- a/docs/configuration/firewall/bridge.rst
+++ b/docs/configuration/firewall/bridge.rst
@@ -157,8 +157,8 @@ log options can be defined.
    Enable logging for the matched packet. If this configuration command is not
    present, then log is not enabled.
 
-.. cfgcmd:: set firewall bridge forward filter enable-default-log
-.. cfgcmd:: set firewall bridge name <name> enable-default-log
+.. cfgcmd:: set firewall bridge forward filter default-log
+.. cfgcmd:: set firewall bridge name <name> default-log
 
    Use this command to enable the logging of the default action on
    the specified chain.
@@ -325,7 +325,7 @@ Configuration example:
 .. code-block:: none
 
    set firewall bridge forward filter default-action 'drop'
-   set firewall bridge forward filter enable-default-log
+   set firewall bridge forward filter default-log
    set firewall bridge forward filter rule 10 action 'continue'
    set firewall bridge forward filter rule 10 inbound-interface name 'eth2'
    set firewall bridge forward filter rule 10 vlan id '22'
@@ -341,7 +341,7 @@ Configuration example:
    set firewall bridge forward filter rule 40 destination mac-address '66:55:44:33:22:11'
    set firewall bridge forward filter rule 40 source mac-address '11:22:33:44:55:66'
    set firewall bridge name TEST default-action 'accept'
-   set firewall bridge name TEST enable-default-log
+   set firewall bridge name TEST default-log
    set firewall bridge name TEST rule 10 action 'continue'
    set firewall bridge name TEST rule 10 log
    set firewall bridge name TEST rule 10 vlan priority '0'
diff --git a/docs/configuration/firewall/ipv4.rst b/docs/configuration/firewall/ipv4.rst
index ff739418..1cf50810 100644
--- a/docs/configuration/firewall/ipv4.rst
+++ b/docs/configuration/firewall/ipv4.rst
@@ -206,10 +206,10 @@ log options can be defined.
    Enable logging for the matched packet. If this configuration command is not
    present, then log is not enabled.
 
-.. cfgcmd:: set firewall ipv4 forward filter enable-default-log
-.. cfgcmd:: set firewall ipv4 input filter enable-default-log
-.. cfgcmd:: set firewall ipv4 output filter enable-default-log
-.. cfgcmd:: set firewall ipv4 name <name> enable-default-log
+.. cfgcmd:: set firewall ipv4 forward filter default-log
+.. cfgcmd:: set firewall ipv4 input filter default-log
+.. cfgcmd:: set firewall ipv4 output filter default-log
+.. cfgcmd:: set firewall ipv4 name <name> default-log
 
    Use this command to enable the logging of the default action on
    the specified chain.
diff --git a/docs/configuration/firewall/ipv6.rst b/docs/configuration/firewall/ipv6.rst
index 0aa8a137..c679ffd5 100644
--- a/docs/configuration/firewall/ipv6.rst
+++ b/docs/configuration/firewall/ipv6.rst
@@ -206,10 +206,10 @@ log options can be defined.
    Enable logging for the matched packet. If this configuration command is not
    present, then log is not enabled.
 
-.. cfgcmd:: set firewall ipv6 forward filter enable-default-log
-.. cfgcmd:: set firewall ipv6 input filter enable-default-log
-.. cfgcmd:: set firewall ipv6 output filter enable-default-log
-.. cfgcmd:: set firewall ipv6 name <name> enable-default-log
+.. cfgcmd:: set firewall ipv6 forward filter default-log
+.. cfgcmd:: set firewall ipv6 input filter default-log
+.. cfgcmd:: set firewall ipv6 output filter default-log
+.. cfgcmd:: set firewall ipv6 name <name> default-log
 
    Use this command to enable the logging of the default action on
    the specified chain.
@@ -1177,7 +1177,7 @@ Example Partial Config
               }
               name INP-ETH1 {
                   default-action drop
-                  enable-default-log
+                  default-log
                   rule 10 {
                       action accept
                       protocol tcp_udp
diff --git a/docs/configuration/policy/route.rst b/docs/configuration/policy/route.rst
index 1a85ffc6..45975774 100644
--- a/docs/configuration/policy/route.rst
+++ b/docs/configuration/policy/route.rst
@@ -19,8 +19,8 @@ from 1 - 999999, at the first match the action of the rule will be executed.
 
    Provide a rule-set description.
 
-.. cfgcmd:: set policy route <name> enable-default-log
-.. cfgcmd:: set policy route6 <name> enable-default-log
+.. cfgcmd:: set policy route <name> default-log
+.. cfgcmd:: set policy route6 <name> default-log
 
    Option to log packets hitting default-action.
 
@@ -271,4 +271,4 @@ setting a different routing table.
 .. cfgcmd:: set policy route <name> rule <n> set tcp-mss <500-1460>
 .. cfgcmd:: set policy route6 <name> rule <n> set tcp-mss <500-1460>
 
-   Set packet modifications: Explicitly set TCP Maximum segment size value.
\ No newline at end of file
+   Set packet modifications: Explicitly set TCP Maximum segment size value.