interfaces: consolidate vxlan, geneve, wifi, pppoe, wwan to new include command syntax

1 files changed, 3 insertions, 57 deletions

diff --git a/docs/_include/interface-dhcpv6-options.txt b/docs/_include/interface-dhcpv6-options.txt
index 7213079a..94e80309 100644
--- a/docs/_include/interface-dhcpv6-options.txt
+++ b/docs/_include/interface-dhcpv6-options.txt
@@ -33,60 +33,6 @@
 
     set interfaces {{ var0 }} {{ var1 }} dhcpv6-options temporary
 
-
-
-
-**DHCPv6-PD**
-
-VyOS 1.3 (equuleus) supports DHCPv6-PD (:rfc:`3633`). DHCPv6 Prefix Delegation
-is supported by most ISPs who provide native IPv6 for consumers on fixed networks.
-
-.. cfgcmd:: set interfaces {{ var0 }} <interface> dhcpv6-option pd <id> length <length>
-
-   Some ISPs by default only delegate a /64 prefix. To request for a specific
-   prefix size use this option to request for a bigger delegation for this pd
-   `<id>`. This value is in the range from 32 - 64 so you could request up to a
-   /32 prefix (if your ISP allows this) down to a /64 delegation.
-
-   The default value corresponds to 64.
-
-  Example:
-
-  To request a /56 prefix from your ISP use:
-
-  .. code-block:: none
-
-    set interfaces {{ var0 }} {{ var1 }} dhcpv6-options pd 0 length 56
-
-.. cfgcmd:: set interfaces {{ var0 }} <interface> dhcpv6-option pd <id> interface <delegatee> address <address>
-
-   Specify the interface address used locally on the interfcae where the prefix
-   has been delegated to. ID must be a decimal integer.
-
-   It will be combined with the delegated prefix and the sla-id to form a
-   complete interface address. The default is to use the EUI-64 address of the
-   interface.
-
-   Example: Delegate a /64 prefix to interface eth0.10 which will use a local
-   address on this router of ``<prefix>::ffff``, as the address 65534 will
-   correspond to ``ffff`` in hexadecimal notation.
-
-  .. code-block:: none
-
-    set interfaces {{ var0 }} {{ var1 }} dhcpv6-option pd 0 interface eth0.10 address 65534
-
-.. cfgcmd:: set interfaces {{ var0 }} <interface> dhcpv6-option pd <id> interface <delegatee> sla-id <id>
-
-   Specify the identifier value of the site-level aggregator (SLA) on the
-   interface. ID must be a decimal number greater then 0 which fits in the
-   length of SLA IDs (see below).
-
-   Example: If ID is 1 and the client is delegated an IPv6 prefix
-   2001:db8:ffff::/48, dhcp6c will combine the two values into a single IPv6
-   prefix, 2001:db8:ffff:1::/64, and will configure the prefix on the specified
-   interface.
-
-  .. code-block:: none
-
-    set interfaces {{ var0 }} {{ var1 }} dhcpv6-option pd 0 interface eth0.10 sla-id 1
-
+.. cmdinclude:: ../_include/interface-dhcpv6-prefix-delegation.txt
+  :var0: {{ var0 }}
+  :var1: {{ var1 }}