interfaces: consolidate vxlan, geneve, wifi, pppoe, wwan to new include command syntax

1 files changed, 22 insertions, 0 deletions

diff --git a/docs/_include/interface-disable-flow-control.txt b/docs/_include/interface-disable-flow-control.txt
new file mode 100644
index 00000000..2b319b22
--- /dev/null
+++ b/docs/_include/interface-disable-flow-control.txt
@@ -0,0 +1,22 @@
+.. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }} disable-flow-control
+
+  Ethernet flow control is a mechanism for temporarily stopping the transmission
+  of data on Ethernet family computer networks. The goal of this mechanism is to
+  ensure zero packet loss in the presence of network congestion.
+
+  The first flow control mechanism, the pause frame, was defined by the IEEE
+  802.3x standard.
+
+  A sending station (computer or network switch) may be transmitting data faster
+  than the other end of the link can accept it. Using flow control, the receiving
+  station can signal the sender requesting suspension of transmissions until the
+  receiver catches up.
+
+  Use this command to disable the generation of Ethernet flow control (pause
+  frames).
+
+   Example:
+
+   .. code-block:: none
+
+     set interfaces {{ var0 }} {{ var1 }} {{ var2 }} {{ var4 }} disable-flow-control
\ No newline at end of file