arrange examples

1 files changed, 0 insertions, 130 deletions

diff --git a/docs/appendix/examples/azure-vpn-bgp.rst b/docs/appendix/examples/azure-vpn-bgp.rst
deleted file mode 100644
index 176e0ae0..00000000
--- a/docs/appendix/examples/azure-vpn-bgp.rst
+++ /dev/null
@@ -1,130 +0,0 @@
-.. _examples-azure-vpn-bgp:
-
-Route-Based Site-to-Site VPN to Azure (BGP over IKEv2/IPsec)
-------------------------------------------------------------
-
-This guide shows an example of a route-based IKEv2 site-to-site VPN to
-Azure using VTI and BGP for dynamic routing updates.
-
-For redundant / active-active configurations see `Route-Based Redundant Site-to-Site VPN to Azure (BGP over IKEv2/IPsec) <https://docs.vyos.io/en/crux/appendix/examples/azure-vpn-dual-bgp.html>`_
-
-Prerequisites
-^^^^^^^^^^^^^
-
-- A pair of Azure VNet Gateways deployed in active-passive
-  configuration with BGP enabled.
-
-- A local network gateway deployed in Azure representing
-  the Vyos device, matching the below Vyos settings except for
-  address space, which only requires the Vyos private IP, in
-  this example 10.10.0.5/32
-
-- A connection resource deployed in Azure linking the
-  Azure VNet gateway and the local network gateway representing
-  the Vyos device.
-
-Example
-^^^^^^^
-
-+---------------------------------------+---------------------+
-| WAN Interface                         | eth0                |
-+---------------------------------------+---------------------+
-| On-premises address space             | 10.10.0.0/16        |
-+---------------------------------------+---------------------+
-| Azure address space                   |  10.0.0.0/16        |
-+---------------------------------------+---------------------+
-| Vyos public IP                        | 198.51.100.3        |
-+---------------------------------------+---------------------+
-| Vyos private IP                       | 10.10.0.5           |
-+---------------------------------------+---------------------+
-| Azure VNet Gateway public IP          |  203.0.113.2        |
-+---------------------------------------+---------------------+
-| Azure VNet Gateway BGP IP             |  10.0.0.4           |
-+---------------------------------------+---------------------+
-| Pre-shared key                        | ch00s3-4-s3cur3-psk |
-+---------------------------------------+---------------------+
-| Vyos ASN                              | 64499               |
-+---------------------------------------+---------------------+
-| Azure ASN                             | 65540               |
-+---------------------------------------+---------------------+
-
-Vyos configuration
-^^^^^^^^^^^^^^^^^^
-
-- Configure the IKE and ESP settings to match a subset
-  of those supported by Azure:
-
-.. code-block:: none
-
-  set vpn ipsec esp-group AZURE compression 'disable'
-  set vpn ipsec esp-group AZURE lifetime '3600'
-  set vpn ipsec esp-group AZURE mode 'tunnel'
-  set vpn ipsec esp-group AZURE pfs 'dh-group2'
-  set vpn ipsec esp-group AZURE proposal 1 encryption 'aes256'
-  set vpn ipsec esp-group AZURE proposal 1 hash 'sha1'
-
-  set vpn ipsec ike-group AZURE dead-peer-detection action 'restart'
-  set vpn ipsec ike-group AZURE dead-peer-detection interval '15'
-  set vpn ipsec ike-group AZURE dead-peer-detection timeout '30'
-  set vpn ipsec ike-group AZURE ikev2-reauth 'yes'
-  set vpn ipsec ike-group AZURE key-exchange 'ikev2'
-  set vpn ipsec ike-group AZURE lifetime '28800'
-  set vpn ipsec ike-group AZURE proposal 1 dh-group '2'
-  set vpn ipsec ike-group AZURE proposal 1 encryption 'aes256'
-  set vpn ipsec ike-group AZURE proposal 1 hash 'sha1'
-
-- Enable IPsec on eth0
-
-.. code-block:: none
-
-  set vpn ipsec ipsec-interfaces interface 'eth0'
-
-- Configure a VTI with a dummy IP address
-
-.. code-block:: none
-
-  set interfaces vti vti1 address '10.10.1.5/32'
-  set interfaces vti vti1 description 'Azure Tunnel'
-
-- Clamp the VTI's MSS to 1350 to avoid PMTU blackholes.
-
-.. code-block:: none
-
-  set firewall options interface vti1 adjust-mss 1350
-
-- Configure the VPN tunnel
-
-.. code-block:: none
-
-  set vpn ipsec site-to-site peer 203.0.113.2 authentication id '198.51.100.3'
-  set vpn ipsec site-to-site peer 203.0.113.2 authentication mode 'pre-shared-secret'
-  set vpn ipsec site-to-site peer 203.0.113.2 authentication pre-shared-secret 'ch00s3-4-s3cur3-psk'
-  set vpn ipsec site-to-site peer 203.0.113.2 authentication remote-id '203.0.113.2'
-  set vpn ipsec site-to-site peer 203.0.113.2 connection-type 'respond'
-  set vpn ipsec site-to-site peer 203.0.113.2 description 'AZURE PRIMARY TUNNEL'
-  set vpn ipsec site-to-site peer 203.0.113.2 ike-group 'AZURE'
-  set vpn ipsec site-to-site peer 203.0.113.2 ikev2-reauth 'inherit'
-  set vpn ipsec site-to-site peer 203.0.113.2 local-address '10.10.0.5'
-  set vpn ipsec site-to-site peer 203.0.113.2 vti bind 'vti1'
-  set vpn ipsec site-to-site peer 203.0.113.2 vti esp-group 'AZURE'
-
-- **Important**: Add an interface route to reach Azure's BGP listener
-
-.. code-block:: none
-
-  set protocols static interface-route 10.0.0.4/32 next-hop-interface vti1
-
-- Configure your BGP settings
-
-.. code-block:: none
-
-  set protocols bgp 64499 neighbor 10.0.0.4 remote-as '65540'
-  set protocols bgp 64499 neighbor 10.0.0.4 address-family ipv4-unicast soft-reconfiguration 'inbound'
-  set protocols bgp 64499 neighbor 10.0.0.4 timers holdtime '30'
-  set protocols bgp 64499 neighbor 10.0.0.4 timers keepalive '10'
-
-- **Important**: Disable connected check \
-
-.. code-block:: none
-
-  set protocols bgp 64499 neighbor 10.0.0.4 disable-connected-check