Appendix: create dedicated section in manual

1 files changed, 105 insertions, 0 deletions

diff --git a/docs/appendix/examples/dmvpn.rst b/docs/appendix/examples/dmvpn.rst
new file mode 100644
index 00000000..d3bf45c7
--- /dev/null
+++ b/docs/appendix/examples/dmvpn.rst
@@ -0,0 +1,105 @@
+
+.. _examples-dmvpn:
+
+VyOS DMVPN Hub
+--------------
+
+General infomration can be found in the :ref:`vpn-dmvpn` chapter.
+
+Configuration
+^^^^^^^^^^^^^
+
+.. code-block:: sh
+
+  set interfaces tunnel tun100 address '172.16.253.134/29'
+  set interfaces tunnel tun100 encapsulation 'gre'
+  set interfaces tunnel tun100 local-ip '11.22.33.44'
+  set interfaces tunnel tun100 multicast 'enable'
+  set interfaces tunnel tun100 parameters ip key '1'
+
+  set protocols nhrp tunnel tun100 cisco-authentication '<nhrp secret key>'
+  set protocols nhrp tunnel tun100 holding-time '300'
+  set protocols nhrp tunnel tun100 multicast 'dynamic'
+  set protocols nhrp tunnel tun100 redirect
+  set protocols nhrp tunnel tun100 shortcut
+
+  set vpn ipsec esp-group ESP-HUB compression 'disable'
+  set vpn ipsec esp-group ESP-HUB lifetime '1800'
+  set vpn ipsec esp-group ESP-HUB mode 'tunnel'
+  set vpn ipsec esp-group ESP-HUB pfs 'dh-group2'
+  set vpn ipsec esp-group ESP-HUB proposal 1 encryption 'aes256'
+  set vpn ipsec esp-group ESP-HUB proposal 1 hash 'sha1'
+  set vpn ipsec esp-group ESP-HUB proposal 2 encryption '3des'
+  set vpn ipsec esp-group ESP-HUB proposal 2 hash 'md5'
+  set vpn ipsec ike-group IKE-HUB ikev2-reauth 'no'
+  set vpn ipsec ike-group IKE-HUB key-exchange 'ikev1'
+  set vpn ipsec ike-group IKE-HUB lifetime '3600'
+  set vpn ipsec ike-group IKE-HUB proposal 1 dh-group '2'
+  set vpn ipsec ike-group IKE-HUB proposal 1 encryption 'aes256'
+  set vpn ipsec ike-group IKE-HUB proposal 1 hash 'sha1'
+  set vpn ipsec ike-group IKE-HUB proposal 2 dh-group '2'
+  set vpn ipsec ike-group IKE-HUB proposal 2 encryption 'aes128'
+  set vpn ipsec ike-group IKE-HUB proposal 2 hash 'sha1'
+  set vpn ipsec ipsec-interfaces interface 'eth0'
+
+  set vpn ipsec profile NHRPVPN authentication mode 'pre-shared-secret'
+  set vpn ipsec profile NHRPVPN authentication pre-shared-secret '<secretkey>'
+  set vpn ipsec profile NHRPVPN bind tunnel 'tun100'
+  set vpn ipsec profile NHRPVPN esp-group 'ESP-HUB'
+  set vpn ipsec profile NHRPVPN ike-group 'IKE-HUB'
+
+Cisco IOS Spoke
+^^^^^^^^^^^^^^^
+
+This example is verified with a Cisco 2811 platform running IOS 15.1(4)M9 and
+VyOS 1.1.7 (helium) up to VyOS 1.2 (Crux).
+
+.. code-block:: sh
+
+  Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version 15.1(4)M9, RELEASE SOFTWARE (fc3)
+  Technical Support: http://www.cisco.com/techsupport
+  Copyright (c) 1986-2014 by Cisco Systems, Inc.
+  Compiled Fri 12-Sep-14 10:45 by prod_rel_team
+
+  ROM: System Bootstrap, Version 12.3(8r)T7, RELEASE SOFTWARE (fc1)
+
+Use this configuration on your Cisco device:
+
+.. code-block:: sh
+
+  crypto pki token default removal timeout 0
+  crypto keyring DMVPN
+    pre-shared-key address 1.2.3.4 key <secretkey>
+  !
+  crypto isakmp policy 10
+   encr aes 256
+   authentication pre-share
+   group 2
+  !
+  crypto isakmp invalid-spi-recovery
+  crypto isakmp keepalive 30 30 periodic
+  crypto isakmp profile DMVPN
+     keyring DMVPN
+     match identity address 11.22.33.44 255.255.255.255
+  !
+  crypto ipsec transform-set DMVPN-AES256 esp-aes 256 esp-sha-hmac
+   mode transport
+  !
+  crypto ipsec profile DMVPN
+   set security-association idle-time 720
+   set transform-set DMVPN-AES256
+  !
+  interface Tunnel10
+   description Tunnel to DMVPN HUB
+   ip address 172.16.253.129 255.255.255.248
+   no ip redirects
+   ip nhrp authentication <nhrp secret key>
+   ip nhrp map multicast 11.22.33.44
+   ip nhrp map 172.16.253.134 11.22.33.44
+   ip nhrp network-id 1
+   ip nhrp holdtime 600
+   ip nhrp nhs 172.16.253.134
+   ip nhrp registration timeout 75
+   tunnel source Dialer1
+   tunnel mode gre multipoint
+   tunnel key 1