Remove IPv6 chapter

IPv6 specific stuff is handeled direclty in the chapters like Network
Interface addresses or BGP.

1 files changed, 164 insertions, 0 deletions

diff --git a/docs/ch15-troubleshooting.rst b/docs/ch15-troubleshooting.rst
new file mode 100644
index 00000000..47abab04
--- /dev/null
+++ b/docs/ch15-troubleshooting.rst
@@ -0,0 +1,164 @@
+Troubleshooting
+===============
+
+Sometimes things break or don't work as expected. This section describes
+several troubleshooting tools provided by VyOS that can help when something
+goes wrong.
+
+Basic Connectivity Verification
+-------------------------------
+
+Verifying connectivity can be done with the familiar `ping` and `traceroute`
+commands. The options for each are shown (the options for each command were
+displayed using the built-in help as described in the `Command-Line Interface`_
+section and are omitted from the output here):
+
+.. code-block:: sh
+
+  vyos@vyos:~$ ping
+  Possible completions:
+    <hostname>    Send Internet Control Message Protocol (ICMP) echo request
+    <x.x.x.x>
+    <h:h:h:h:h:h:h:h>
+
+Several options are available when more extensive troubleshooting is needed:
+
+.. code-block:: sh
+
+  vyos@vyos:~$ ping 8.8.8.8
+  Possible completions:
+    <Enter>       Execute the current command
+    adaptive      Ping options
+    allow-broadcast
+    audible
+    bypass-route
+    count
+    deadline
+    flood
+    interface
+    interval
+    mark
+    no-loopback
+    numeric
+    pattern
+    quiet
+    record-route
+    size
+    timestamp
+    tos
+    ttl
+    verbose
+
+.. code-block:: sh
+
+  vyos@vyos:~$ traceroute
+  Possible completions:
+    <hostname>    Track network path to specified node
+    <x.x.x.x>
+    <h:h:h:h:h:h:h:h>
+    ipv4          Track network path to <hostname|IPv4 address>
+    ipv6          Track network path to <hostname|IPv6 address>
+
+However, another tool, mtr_, is available which combines ping and traceroute
+into a single tool. An example of its output is shown:
+
+.. code-block:: sh
+
+  vyos@vyos:~$ mtr 10.62.212.12
+
+                             My traceroute  [v0.85]
+  vyos (0.0.0.0)
+  Keys:  Help   Display mode   Restart statistics   Order of fields   quit
+                                    Packets               Pings
+  Host                            Loss%   Snt   Last   Avg  Best  Wrst StDev
+  1. 10.11.110.4                   0.0%    34    0.5   0.5   0.4   0.8   0.1
+  2. 10.62.255.184                 0.0%    34    1.1   1.0   0.9   1.4   0.1
+  3. 10.62.255.71                  0.0%    34    1.4   1.4   1.3   2.0   0.1
+  4. 10.62.212.12                  0.0%    34    1.6   1.6   1.6   1.7   0.0
+
+**NOTE:** The output of '''mtr''' consumes the screen and will replace your
+command prompt.
+
+Several options are available for changing the display output. Press `h` to
+invoke the built in help system. To quit, just press `q` and you'll be returned
+to the VyOS command prompt.
+
+Monitoring Network Interfaces
+-----------------------------
+
+It's possible to monitor network traffic, either at the flow level or protocol
+level. This can be useful when troubleshooting a variety of protocols and
+configurations. The following interface types can be monitored:
+
+.. code-block:: sh
+
+  vyos@vyos:~$ monitor interfaces
+  Possible completions:
+    <Enter>       Execute the current command
+    bonding       Monitor a bonding interface
+    bridge        Monitor a bridge interface
+    ethernet      Monitor a ethernet interface
+    loopback      Monitor a loopback interface
+    openvpn       Monitor an openvpn interface
+    pppoe         Monitor pppoe interface
+    pseudo-ethernet
+                  Monitor a pseudo-ethernet interface
+    tunnel        Monitor a tunnel interface
+    vrrp          Monitor a vrrp interface
+    vti           Monitor a vti interface
+    wireless      Monitor wireless interface
+
+To monitor traffic flows, issue the :code:`monitor interfaces <type> <name> flow`
+command, replacing `<type>` and `<name>` with your desired interface type and
+name, respectively. Output looks like the following:
+
+.. code-block:: sh
+
+                     12.5Kb              25.0Kb              37.5Kb              50.0Kb        62.5Kb
+  ????????????????????????????????????????????????????????????????????????????????????????????????????
+  10.11.111.255                        => 10.11.110.37                            0b      0b      0b
+                                      <=                                       624b    749b    749b
+  10.11.110.29                         => 10.62.200.11                            0b    198b    198b
+                                      <=                                         0b    356b    356b
+  255.255.255.255                      => 10.11.110.47                            0b      0b      0b
+                                      <=                                       724b    145b    145b
+  10.11.111.255                        => 10.11.110.47                            0b      0b      0b
+                                      <=                                       724b    145b    145b
+  10.11.111.255                        => 10.11.110.255                           0b      0b      0b
+                                      <=                                       680b    136b    136b
+  ????????????????????????????????????????????????????????????????????????????????????????????????????
+  TX:             cumm:  26.7KB   peak:   40.6Kb                      rates:   23.2Kb  21.4Kb  21.4Kb
+  RX:                    67.5KB           63.6Kb                               54.6Kb  54.0Kb  54.0Kb
+  TOTAL:                 94.2KB            104Kb                               77.8Kb  75.4Kb  75.4Kb
+
+Several options are available for changing the display output. Press `h` to
+invoke the built in help system. To quit, just press `q` and you'll be returned
+to the VyOS command prompt.
+
+To monitor interface traffic, issue the :code:`monitor interfaces <type> <name>
+traffic` command, replacing `<type>` and `<name>` with your desired interface
+type and name, respectively. This command invokes the familiar tshark_ utility
+and the following options are available:
+
+.. code-block:: sh
+
+  vyos@vyos:~$ monitor interfaces ethernet eth0 traffic
+  Possible completions:
+    <Enter>       Execute the current command
+    detail        Monitor detailed traffic for the specified ethernet interface
+    filter        Monitor filtered traffic for the specified ethernet interface
+    save          Save monitored traffic to a file
+    unlimited     Monitor traffic for the specified ethernet interface
+
+To quit monitoring, press `Ctrl-c` and you'll be returned to the VyOS command
+prompt. The `detail` keyword provides verbose output of the traffic seen on
+the monitored interface. The `filter` keyword accepts valid `PCAP filter
+expressions`_, enclosed in single or double quotes (e.g. "port 25" or "port 161
+and udp"). The `save` keyword allows you to save the traffic dump to a file.
+The `unlimited` keyword is used to specify that an unlimited number of packets
+can be captured (by default, 1,000 packets are captured and you're returned to
+the VyOS command prompt).
+
+.. _mtr: http://www.bitwizard.nl/mtr/
+.. _tshark: https://www.wireshark.org/docs/man-pages/tshark.html
+.. _`PCAP filter expressions`: http://www.tcpdump.org/manpages/pcap-filter.7.html