cluster: reactivate cluster docu

1 files changed, 0 insertions, 76 deletions

diff --git a/docs/clustering.removed b/docs/clustering.removed
deleted file mode 100644
index 97678445..00000000
--- a/docs/clustering.removed
+++ /dev/null
@@ -1,76 +0,0 @@
-.. _clustering:
-
-Clustering
-==========
-
-The cluster feature allows 2 vyos routers to share IP addresses and various services.
-
-VyOS supports multicast clustering.
-
-.. note::
-  Please follow the process of the cluster function here. https://phabricator.vyos.net/T985
-
-
-General cluster configuration
------------------------------
-
-In the general cluster configuration the network interfaces used for monitoring and negotiation of the cluster health is defined.
-Additionally, the communication interval settings, multicast group (for sending/receiving heartbeat messages), and pre-shared secret used in this monitoring is defined.
-
-.. code-block:: none
-
-  vyos@vyos# set cluster
-  Possible completions:
-    dead-interval            Interval after which a node is considered dead after missing heartbeats (milliseconds)
-  +> group                   Name of resource group for clustering [REQUIRED]
-  +  interface               Interface(s) for sending/receiving heartbeat packets [REQUIRED]
-    keepalive-interval       Time interval between heartbeat packets (milliseconds)
-    mcast-group              Multicast group for sending/receiving heartbeat packets
-    monitor-dead-interval    Interval after which a monitor node is considered dead (milliseconds)
-    pre-shared-secret        Pre-shared secret for authentication between cluster nodes [REQUIRED]
-
-Cluster group configuration
----------------------------
-
-For the cluster group configuration, the group name must be defined before the groups configuration can be set (See Example below).
-After the group name is defined, the specific service to be clustered between primary and secondary nodes is configured.
-
-.. code-block:: none
-
-  vyos@vyos# set cluster group GROUPNAME
-  Possible completions:
-    auto-failback        Fail back to primary node if it recovers from failure
-  +  monitor             IP address(es) for monitoring connectivity
-    primary              Host name of the primary node [REQUIRED]
-  +  secondary           Host name(s) of the secondary node(s) [REQUIRED]
-  +  service             IP address(es) or service name(s) in this resource group [REQUIRED]
-
-Review cluster status
----------------------
-
-.. code-block:: none
-
-  vyos@vyos:~$ show cluster status
-
-
-Example
--------
-
-In the example below SSH is clustered between two nodes.
-
-.. code-block:: none
-
-  cluster {
-      dead-interval 20000
-      group cluster {
-          auto-failback false
-          primary node1
-          secondary node2
-          service ssh
-          service 192.168.0.123/24/eth0
-      }
-      interface eth0
-      keepalive-interval 5000
-      monitor-dead-interval 20000
-      pre-shared-secret S3cr#t
-  }
\ No newline at end of file