backport Firewall docs from master

1 files changed, 117 insertions, 0 deletions

diff --git a/docs/configuration/firewall/global-options.rst b/docs/configuration/firewall/global-options.rst
new file mode 100644
index 00000000..316e0802
--- /dev/null
+++ b/docs/configuration/firewall/global-options.rst
@@ -0,0 +1,117 @@
+:lastproofread: 2023-11-07
+
+.. _firewall-global-options-configuration:
+
+#####################################
+Global Options Firewall Configuration
+#####################################
+
+********
+Overview
+********
+
+Some firewall settings are global and have an affect on the whole system.
+In this section there's useful information about these global-options that can
+be configured using vyos cli.
+
+Configuration commands covered in this section:
+
+.. cfgcmd:: set firewall global-options ...
+
+*************
+Configuration
+*************
+
+.. cfgcmd:: set firewall global-options all-ping [enable | disable]
+
+   By default, when VyOS receives an ICMP echo request packet destined for
+   itself, it will answer with an ICMP echo reply, unless you avoid it
+   through its firewall.
+
+   With the firewall you can set rules to accept, drop or reject ICMP in,
+   out or local traffic. You can also use the general **firewall all-ping**
+   command. This command affects only to LOCAL (packets destined for your
+   VyOS system), not to IN or OUT traffic.
+
+   .. note:: **firewall global-options all-ping** affects only to LOCAL
+      and it always behaves in the most restrictive way
+
+   .. code-block:: none
+
+      set firewall global-options all-ping enable
+
+   When the command above is set, VyOS will answer every ICMP echo request
+   addressed to itself, but that will only happen if no other rule is
+   applied dropping or rejecting local echo requests. In case of conflict,
+   VyOS will not answer ICMP echo requests.
+
+   .. code-block:: none
+
+      set firewall global-options all-ping disable
+
+   When the command above is set, VyOS will answer no ICMP echo request
+   addressed to itself at all, no matter where it comes from or whether
+   more specific rules are being applied to accept them.
+
+.. cfgcmd:: set firewall global-options broadcast-ping [enable | disable]
+
+   This setting enable or disable the response of icmp broadcast
+   messages. The following system parameter will be altered:
+
+   * ``net.ipv4.icmp_echo_ignore_broadcasts``
+
+.. cfgcmd:: set firewall global-options ip-src-route [enable | disable]
+.. cfgcmd:: set firewall global-options ipv6-src-route [enable | disable]
+
+   This setting handle if VyOS accept packets with a source route
+   option. The following system parameter will be altered:
+
+   * ``net.ipv4.conf.all.accept_source_route``
+   * ``net.ipv6.conf.all.accept_source_route``
+
+.. cfgcmd:: set firewall global-options receive-redirects [enable | disable]
+.. cfgcmd:: set firewall global-options ipv6-receive-redirects
+   [enable | disable]
+
+   enable or disable of ICMPv4 or ICMPv6 redirect messages accepted
+   by VyOS. The following system parameter will be altered:
+
+   * ``net.ipv4.conf.all.accept_redirects``
+   * ``net.ipv6.conf.all.accept_redirects``
+
+.. cfgcmd:: set firewall global-options send-redirects [enable | disable]
+
+   enable or disable ICMPv4 redirect messages send by VyOS
+   The following system parameter will be altered:
+
+   * ``net.ipv4.conf.all.send_redirects``
+
+.. cfgcmd:: set firewall global-options log-martians [enable | disable]
+
+   enable or disable the logging of martian IPv4 packets.
+   The following system parameter will be altered:
+
+   * ``net.ipv4.conf.all.log_martians``
+
+.. cfgcmd:: set firewall global-options source-validation
+   [strict | loose | disable]
+
+   Set the IPv4 source validation mode.
+   The following system parameter will be altered:
+
+   * ``net.ipv4.conf.all.rp_filter``
+
+.. cfgcmd:: set firewall global-options syn-cookies [enable | disable]
+
+   Enable or Disable if VyOS use IPv4 TCP SYN Cookies.
+   The following system parameter will be altered:
+
+   * ``net.ipv4.tcp_syncookies``
+
+.. cfgcmd:: set firewall global-options twa-hazards-protection
+   [enable | disable]
+
+   Enable or Disable VyOS to be :rfc:`1337` conform.
+   The following system parameter will be altered:
+
+   * ``net.ipv4.tcp_rfc1337``
\ No newline at end of file