firewall: Corrected spelling mistakes

1 files changed, 11 insertions, 11 deletions

diff --git a/docs/configuration/firewall/ipv6.rst b/docs/configuration/firewall/ipv6.rst
index 0aa8a137..236bdead 100644
--- a/docs/configuration/firewall/ipv6.rst
+++ b/docs/configuration/firewall/ipv6.rst
@@ -11,7 +11,7 @@ Overview
 ********
 
 In this section there's useful information of all firewall configuration that
-can be done regarding IPv6, and appropiate op-mode commands.
+can be done regarding IPv6, and appropriate op-mode commands.
 Configuration commands covered in this section:
 
 .. cfgcmd:: set firewall ipv6 ...
@@ -41,12 +41,12 @@ next:
 
 Where firewall base chain to configure firewall filtering rules for transit
 traffic is ``set firewall ipv6 forward filter ...``, which happens in stage 5,
-highlightened with red color.
+highlighted with red color.
 
 For traffic towards the router itself, base chain is **input**, while traffic
 originated by the router, base chain is **output**.
 A new simplified packet flow diagram is shown next, which shows the path
-for traffic destinated to the router itself, and traffic generated by the
+for traffic destined to the router itself, and traffic generated by the
 router (starting from circle number 6):
 
 .. figure:: /_static/images/firewall-input-packet-flow.png
@@ -64,7 +64,7 @@ output filter ...``
 
 Custom firewall chains can be created, with commands
 ``set firewall ipv6 name <name> ...``. In order to use
-such custom chain, a rule with **action jump**, and the appropiate **target**
+such custom chain, a rule with **action jump**, and the appropriate **target**
 should be defined in a base chain.
 
 ******************************
@@ -184,7 +184,7 @@ not match any rule in it's chain. For base chains, possible options for
 
 .. cfgcmd:: set firewall ipv6 name <name> default-jump-target <text>
 
-   To be used only when ``defult-action`` is set to ``jump``. Use this
+   To be used only when ``default-action`` is set to ``jump``. Use this
    command to specify jump target for default rule.
 
 .. note:: **Important note about default-actions:**
@@ -670,9 +670,9 @@ geoip) to keep database and rules updated.
 .. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
    inbound-interface name <iface>
 
-   Match based on inbound interface. Wilcard ``*`` can be used.
+   Match based on inbound interface. Wildcard ``*`` can be used.
    For example: ``eth2*``. Prepending character ``!`` for inverted matching
-   criteria is also supportd. For example ``!eth2``
+   criteria is also supported. For example ``!eth2``
 
 .. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
    inbound-interface group <iface_group>
@@ -682,7 +682,7 @@ geoip) to keep database and rules updated.
    inbound-interface group <iface_group>
 
    Match based on inbound interface group. Prepending character ``!`` for
-   inverted matching criteria is also supportd. For example ``!IFACE_GROUP``
+   inverted matching criteria is also supported. For example ``!IFACE_GROUP``
 
 .. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
    outbound-interface name <iface>
@@ -691,9 +691,9 @@ geoip) to keep database and rules updated.
 .. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
    outbound-interface name <iface>
 
-   Match based on outbound interface. Wilcard ``*`` can be used.
+   Match based on outbound interface. Wildcard ``*`` can be used.
    For example: ``eth2*``. Prepending character ``!`` for inverted matching
-   criteria is also supportd. For example ``!eth2``
+   criteria is also supported. For example ``!eth2``
 
 .. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
    outbound-interface group <iface_group>
@@ -703,7 +703,7 @@ geoip) to keep database and rules updated.
    outbound-interface group <iface_group>
 
    Match based on outbound interface group. Prepending character ``!`` for
-   inverted matching criteria is also supportd. For example ``!IFACE_GROUP``
+   inverted matching criteria is also supported. For example ``!IFACE_GROUP``
 
 .. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
    ipsec [match-ipsec | match-none]