backport Firewall docs from master

1 files changed, 1167 insertions, 0 deletions

diff --git a/docs/configuration/firewall/ipv6.rst b/docs/configuration/firewall/ipv6.rst
new file mode 100644
index 00000000..83a5f694
--- /dev/null
+++ b/docs/configuration/firewall/ipv6.rst
@@ -0,0 +1,1167 @@
+:lastproofread: 2023-11-08
+
+.. _firewall-ipv6-configuration:
+
+###########################
+IPv6 Firewall Configuration
+###########################
+
+********
+Overview
+********
+
+In this section there's useful information of all firewall configuration that
+can be done regarding IPv6, and appropiate op-mode commands.
+Configuration commands covered in this section:
+
+.. cfgcmd:: set firewall ipv6 ...
+
+From main structure defined in :doc:`Firewall Overview</configuration/firewall/index>`
+in this section you can find detailed information only for the next part
+of the general structure:
+
+.. code-block:: none
+
+   - set firewall
+       * ipv6
+            - forward
+               + filter
+            - input
+               + filter
+            - output
+               + filter
+            - name
+               + custom_name
+
+For transit traffic, which is received by the router and forwarded, base chain
+is **forward**. A simplified packet flow diagram for transit traffic is shown
+next:
+
+.. figure:: /_static/images/firewall-fwd-packet-flow.png
+
+Where firewall base chain to configure firewall filtering rules for transit
+traffic is ``set firewall ipv6 forward filter ...``, which happens in stage 5,
+highlightened with red color.
+
+For traffic towards the router itself, base chain is **input**, while traffic
+originated by the router, base chain is **output**.
+A new simplified packet flow diagram is shown next, which shows the path
+for traffic destinated to the router itself, and traffic generated by the
+router (starting from circle number 6):
+
+.. figure:: /_static/images/firewall-input-packet-flow.png
+
+Base chain is for traffic toward the router is ``set firewall ipv6 input
+filter ...``
+
+And base chain for traffic generated by the router is ``set firewall ipv6
+output filter ...``
+
+.. note:: **Important note about default-actions:**
+   If default action for any base chain is not defined, then the default
+   action is set to **accept** for that chain. For custom chains, if default
+   action is not defined, then the default-action is set to **drop**
+
+Custom firewall chains can be created, with commands
+``set firewall ipv6 name <name> ...``. In order to use
+such custom chain, a rule with **action jump**, and the appropiate **target**
+should be defined in a base chain.
+
+******************************
+Firewall - IPv6 Rules
+******************************
+
+For firewall filtering, firewall rules needs to be created. Each rule is
+numbered, has an action to apply if the rule is matched, and the ability
+to specify multiple criteria matchers. Data packets go through the rules
+from 1 - 999999, so order is crucial. At the first match the action of the
+rule will be executed.
+
+Actions
+=======
+
+If a rule is defined, then an action must be defined for it. This tells the
+firewall what to do if all criteria matchers defined for such rule do match.
+
+The action can be :
+
+   * ``accept``: accept the packet.
+
+   * ``continue``: continue parsing next rule.
+
+   * ``drop``: drop the packet.
+
+   * ``reject``: reject the packet.
+
+   * ``jump``: jump to another custom chain.
+
+   * ``return``: Return from the current chain and continue at the next rule
+     of the last chain.
+
+   * ``queue``: Enqueue packet to userspace.
+
+   * ``synproxy``: synproxy the packet.
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999> action
+   [accept | continue | drop | jump | queue | reject | return | synproxy]
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999> action
+   [accept | continue | drop | jump | queue | reject | return | synproxy]
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999> action
+   [accept | continue | drop | jump | queue | reject | return]
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999> action
+   [accept | continue | drop | jump | queue | reject | return]
+
+   This required setting defines the action of the current rule. If action is
+   set to jump, then jump-target is also needed.
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   jump-target <text>
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   jump-target <text>
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   jump-target <text>
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   jump-target <text>
+
+   To be used only when action is set to jump. Use this command to specify
+   jump target.
+
+Also, **default-action** is an action that takes place whenever a packet does
+not match any rule in it's chain. For base chains, possible options for
+**default-action** are **accept** or **drop**. 
+
+.. cfgcmd:: set firewall ipv6 forward filter default-action
+   [accept | drop]
+.. cfgcmd:: set firewall ipv6 input filter default-action
+   [accept | drop]
+.. cfgcmd:: set firewall ipv6 output filter default-action
+   [accept | drop]
+.. cfgcmd:: set firewall ipv6 name <name> default-action
+   [accept | drop | jump | queue | reject | return]
+
+   This set the default action of the rule-set if no rule matched a packet
+   criteria. If defacult-action is set to ``jump``, then
+   ``default-jump-target`` is also needed. Note that for base chains, default
+   action can only be set to ``accept`` or ``drop``, while on custom chain,
+   more actions are available.
+
+.. cfgcmd:: set firewall ipv6 name <name> default-jump-target <text>
+
+   To be used only when ``defult-action`` is set to ``jump``. Use this
+   command to specify jump target for default rule.
+
+.. note:: **Important note about default-actions:**
+   If default action for any base chain is not defined, then the default
+   action is set to **accept** for that chain. For custom chains, if default
+   action is not defined, then the default-action is set to **drop**
+
+Firewall Logs
+=============
+
+Logging can be enable for every single firewall rule. If enabled, other
+log options can be defined. 
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999> log
+   [disable | enable]
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999> log
+   [disable | enable]
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999> log
+   [disable | enable]
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999> log
+   [disable | enable]
+
+   Enable or disable logging for the matched packet.
+
+.. cfgcmd:: set firewall ipv6 forward filter enable-default-log
+.. cfgcmd:: set firewall ipv6 input filter enable-default-log
+.. cfgcmd:: set firewall ipv6 output filter enable-default-log
+.. cfgcmd:: set firewall ipv6 name <name> enable-default-log
+
+   Use this command to enable the logging of the default action on
+   the specified chain.
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   log-options level [emerg | alert | crit | err | warn | notice
+   | info | debug]
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   log-options level [emerg | alert | crit | err | warn | notice
+   | info | debug]
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   log-options level [emerg | alert | crit | err | warn | notice
+   | info | debug]
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   log-options level [emerg | alert | crit | err | warn | notice
+   | info | debug]
+
+   Define log-level. Only applicable if rule log is enable.
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   log-options group <0-65535>
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   log-options group <0-65535>
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   log-options group <0-65535>
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   log-options group <0-65535>
+
+   Define log group to send message to. Only applicable if rule log is enable.
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   log-options snapshot-length <0-9000>
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   log-options snapshot-length <0-9000>
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   log-options snapshot-length <0-9000>
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   log-options snapshot-length <0-9000>
+
+   Define length of packet payload to include in netlink message. Only
+   applicable if rule log is enable and log group is defined.
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   log-options queue-threshold <0-65535>
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   log-options queue-threshold <0-65535>
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   log-options queue-threshold <0-65535>
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   log-options queue-threshold <0-65535>
+
+   Define number of packets to queue inside the kernel before sending them to
+   userspace. Only applicable if rule log is enable and log group is defined.
+
+Firewall Description
+====================
+
+For reference, a description can be defined for every single rule, and for
+every defined custom chain.
+
+.. cfgcmd:: set firewall ipv6 name <name> description <text>
+
+   Provide a rule-set description to a custom firewall chain.
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   description <text>
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   description <text>
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   description <text>
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999> description <text>
+
+   Provide a description for each rule.
+
+Rule Status
+===========
+
+When defining a rule, it is enable by default. In some cases, it is useful to
+just disable the rule, rather than removing it.
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999> disable
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999> disable
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999> disable
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999> disable
+
+   Command for disabling a rule but keep it in the configuration.
+
+Matching criteria
+=================
+
+There are a lot of matching criteria against which the package can be tested.
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   connection-status nat [destination | source]
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   connection-status nat [destination | source]
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   connection-status nat [destination | source]
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   connection-status nat [destination | source]
+
+   Match criteria based on nat connection status.
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   connection-mark <1-2147483647>
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   connection-mark <1-2147483647>
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   connection-mark <1-2147483647>
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   connection-mark <1-2147483647>
+
+   Match criteria based on connection mark.
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   source address [address | addressrange | CIDR]
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   source address [address | addressrange | CIDR]
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   source address [address | addressrange | CIDR]
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   source address [address | addressrange | CIDR]
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   destination address [address | addressrange | CIDR]
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   destination address [address | addressrange | CIDR]
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   destination address [address | addressrange | CIDR]
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   destination address [address | addressrange | CIDR]
+
+   Match criteria based on source and/or destination address. This is similar
+   to the network groups part, but here you are able to negate the matching
+   addresses.
+
+   .. code-block:: none
+
+      set firewall ipv6 name FOO rule 100 source address 2001:db8::202
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   source address-mask [address]
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   source address-mask [address]
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   source address-mask [address]
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   source address-mask [address]
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   destination address-mask [address]
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   destination address-mask [address]
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   destination address-mask [address]
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   destination address-mask [address]
+
+   An arbitrary netmask can be applied to mask addresses to only match against
+   a specific portion. This is particularly useful with IPv6 as rules will
+   remain valid if the IPv6 prefix changes and the host
+   portion of systems IPv6 address is static (for example, with SLAAC or
+   `tokenised IPv6 addresses
+   <https://datatracker.ietf.org/doc/id/draft-chown-6man-tokenised-ipv6-identifiers-02.txt>`_)
+   
+   This functions for both individual addresses and address groups.
+
+   .. code-block:: none
+
+      # Match any IPv6 address with the suffix ::0000:0000:0000:beef
+      set firewall ipv6 forward filter rule 100 destination address ::beef
+      set firewall ipv6 forward filter rule 100 destination address-mask ::ffff:ffff:ffff:ffff
+      # Address groups
+      set firewall group ipv6-address-group WEBSERVERS address ::1000
+      set firewall group ipv6-address-group WEBSERVERS address ::2000
+      set firewall ipv6 forward filter rule 200 source group address-group WEBSERVERS
+      set firewall ipv6 forward filter rule 200 source address-mask ::ffff:ffff:ffff:ffff
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   source fqdn <fqdn>
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   source fqdn <fqdn>
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   source fqdn <fqdn>
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   source fqdn <fqdn>
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   destination fqdn <fqdn>
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   destination fqdn <fqdn>
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   destination fqdn <fqdn>
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   destination fqdn <fqdn>
+
+   Specify a Fully Qualified Domain Name as source/destination matcher. Ensure
+   router is able to resolve such dns query.
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   source geoip country-code <country>
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   source geoip country-code <country>
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   source geoip country-code <country>
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   source geoip country-code <country>
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   destination geoip country-code <country>
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   destination geoip country-code <country>
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   destination geoip country-code <country>
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   destination geoip country-code <country>
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   source geoip inverse-match
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   source geoip inverse-match
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   source geoip inverse-match
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   source geoip inverse-match
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   destination geoip inverse-match
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   destination geoip inverse-match
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   destination geoip inverse-match
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   destination geoip inverse-match
+
+   Match IP addresses based on its geolocation. More info: `geoip matching
+   <https://wiki.nftables.org/wiki-nftables/index.php/GeoIP_matching>`_.
+   Use inverse-match to match anything except the given country-codes.
+
+Data is provided by DB-IP.com under CC-BY-4.0 license. Attribution required,
+permits redistribution so we can include a database in images(~3MB
+compressed). Includes cron script (manually callable by op-mode update
+geoip) to keep database and rules updated.
+
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   source mac-address <mac-address>
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   source mac-address <mac-address>
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   source mac-address <mac-address>
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   source mac-address <mac-address>
+
+   Only in the source criteria, you can specify a mac-address.
+
+   .. code-block:: none
+
+      set firewall ipv6 input filter rule 100 source mac-address 00:53:00:11:22:33
+      set firewall ipv6 input filter rule 101 source mac-address !00:53:00:aa:12:34
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   source port [1-65535 | portname | start-end]
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   source port [1-65535 | portname | start-end]
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   source port [1-65535 | portname | start-end]
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   source port [1-65535 | portname | start-end]
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   destination port [1-65535 | portname | start-end]
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   destination port [1-65535 | portname | start-end]
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   destination port [1-65535 | portname | start-end]
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   destination port [1-65535 | portname | start-end]
+
+   A port can be set with a port number or a name which is here
+   defined: ``/etc/services``.
+
+   .. code-block:: none
+
+      set firewall ipv6 forward filter rule 10 source port '22'
+      set firewall ipv6 forward filter rule 11 source port '!http'
+      set firewall ipv6 forward filter rule 12 source port 'https'
+
+   Multiple source ports can be specified as a comma-separated list.
+   The whole list can also be "negated" using ``!``. For example:
+
+   .. code-block:: none
+
+      set firewall ipv6 forward filter rule 10 source port '!22,https,3333-3338'
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   source group address-group <name | !name>
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   source group address-group <name | !name>
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   source group address-group <name | !name>
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   source group address-group <name | !name>
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   destination group address-group <name | !name>
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   destination group address-group <name | !name>
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   destination group address-group <name | !name>
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   destination group address-group <name | !name>
+
+   Use a specific address-group. Prepend character ``!`` for inverted matching
+   criteria.
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   source group network-group <name | !name>
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   source group network-group <name | !name>
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   source group network-group <name | !name>
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   source group network-group <name | !name>
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   destination group network-group <name | !name>
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   destination group network-group <name | !name>
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   destination group network-group <name | !name>
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   destination group network-group <name | !name>
+
+   Use a specific network-group. Prepend character ``!`` for inverted matching
+   criteria.
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   source group port-group <name | !name>
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   source group port-group <name | !name>
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   source group port-group <name | !name>
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   source group port-group <name | !name>
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   destination group port-group <name | !name>
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   destination group port-group <name | !name>
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   destination group port-group <name | !name>
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   destination group port-group <name | !name>
+
+   Use a specific port-group. Prepend character ``!`` for inverted matching
+   criteria.
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   source group domain-group <name | !name>
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   source group domain-group <name | !name>
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   source group domain-group <name | !name>
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   source group domain-group <name | !name>
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   destination group domain-group <name | !name>
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   destination group domain-group <name | !name>
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   destination group domain-group <name | !name>
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   destination group domain-group <name | !name>
+
+   Use a specific domain-group. Prepend character ``!`` for inverted matching
+   criteria.
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   source group mac-group <name | !name>
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   source group mac-group <name | !name>
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   source group mac-group <name | !name>
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   source group mac-group <name | !name>
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   destination group mac-group <name | !name>
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   destination group mac-group <name | !name>
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   destination group mac-group <name | !name>
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   destination group mac-group <name | !name>
+
+   Use a specific mac-group. Prepend character ``!`` for inverted matching
+   criteria.
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   dscp [0-63 | start-end]
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   dscp [0-63 | start-end]
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   dscp [0-63 | start-end]
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   dscp [0-63 | start-end]
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   dscp-exclude [0-63 | start-end]
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   dscp-exclude [0-63 | start-end]
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   dscp-exclude [0-63 | start-end]
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   dscp-exclude [0-63 | start-end]
+
+   Match based on dscp value.
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   fragment [match-frag | match-non-frag]
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   fragment [match-frag | match-non-frag]
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   fragment [match-frag | match-non-frag]
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   fragment [match-frag | match-non-frag]
+
+   Match based on fragment criteria.
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   icmpv6 [code | type] <0-255>
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   icmpv6 [code | type] <0-255>
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   icmpv6 [code | type] <0-255>
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   icmpv6 [code | type] <0-255>
+
+   Match based on icmp|icmpv6 code and type.
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   icmpv6 type-name <text>
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   icmpv6 type-name <text>
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   icmpv6 type-name <text>
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   icmpv6 type-name <text>
+
+   Match based on icmpv6 type-name criteria. Use tab for information
+   about what **type-name** criteria are supported.
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   inbound-interface name <iface>
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   inbound-interface name <iface>
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   inbound-interface name <iface>
+
+   Match based on inbound interface. Wilcard ``*`` can be used.
+   For example: ``eth2*``. Prepending character ``!`` for inverted matching
+   criteria is also supportd. For example ``!eth2``
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   inbound-interface group <iface_group>
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   inbound-interface group <iface_group>
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   inbound-interface group <iface_group>
+
+   Match based on inbound interface group. Prepending character ``!`` for
+   inverted matching criteria is also supportd. For example ``!IFACE_GROUP``
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   outbound-interface name <iface>
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   outbound-interface name <iface>
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   outbound-interface name <iface>
+
+   Match based on outbound interface. Wilcard ``*`` can be used.
+   For example: ``eth2*``. Prepending character ``!`` for inverted matching
+   criteria is also supportd. For example ``!eth2``
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   outbound-interface group <iface_group>
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   outbound-interface group <iface_group>
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   outbound-interface group <iface_group>
+
+   Match based on outbound interface group. Prepending character ``!`` for
+   inverted matching criteria is also supportd. For example ``!IFACE_GROUP``
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   ipsec [match-ipsec | match-none]
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   ipsec [match-ipsec | match-none]
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   ipsec [match-ipsec | match-none]
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   ipsec [match-ipsec | match-none]
+
+   Match based on ipsec criteria.
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   limit burst <0-4294967295>
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   limit burst <0-4294967295>
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   limit burst <0-4294967295>
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   limit burst <0-4294967295>
+
+   Match based on the maximum number of packets to allow in excess of rate.
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   limit rate <text>
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   limit rate <text>
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   limit rate <text>
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   limit rate <text>
+
+   Match based on the maximum average rate, specified as **integer/unit**.
+   For example **5/minutes**
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   packet-length <text>
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   packet-length <text>
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   packet-length <text>
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   packet-length <text>
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   packet-length-exclude <text>
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   packet-length-exclude <text>
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   packet-length-exclude <text>
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   packet-length-exclude <text>
+
+   Match based on packet length criteria. Multiple values from 1 to 65535
+   and ranges are supported.
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   packet-type [broadcast | host | multicast | other]
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   packet-type [broadcast | host | multicast | other]
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   packet-type [broadcast | host | multicast | other]
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   packet-type [broadcast | host | multicast | other]
+
+   Match based on packet type criteria.
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   protocol [<text> | <0-255> | all | tcp_udp]
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   protocol [<text> | <0-255> | all | tcp_udp]
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   protocol [<text> | <0-255> | all | tcp_udp]
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   protocol [<text> | <0-255> | all | tcp_udp]
+
+   Match a protocol criteria. A protocol number or a name which is here
+   defined: ``/etc/protocols``.
+   Special names are ``all`` for all protocols and ``tcp_udp`` for tcp and udp
+   based packets. The ``!`` negate the selected protocol.
+
+   .. code-block:: none
+
+      set firewall ipv6 input filter rule 10 protocol tcp
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   recent count <1-255>
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   recent count <1-255>
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   recent count <1-255>
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   recent count <1-255>
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   recent time [second | minute | hour]
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   recent time [second | minute | hour]
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   recent time [second | minute | hour]
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   recent time [second | minute | hour]
+
+   Match bases on recently seen sources.
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   tcp flags [not] <text>
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   tcp flags [not] <text>
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   tcp flags [not] <text>
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   tcp flags [not] <text>
+
+   Allowed values fpr TCP flags: ``ack``, ``cwr``, ``ecn``, ``fin``, ``psh``,
+   ``rst``, ``syn`` and ``urg``. Multiple values are supported, and for
+   inverted selection use ``not``, as shown in the example.
+
+   .. code-block:: none
+
+      set firewall ipv6 input filter rule 10 tcp flags 'ack'
+      set firewall ipv6 input filter rule 12 tcp flags 'syn'
+      set firewall ipv6 input filter rule 13 tcp flags not 'fin'
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   state [established | invalid | new | related] [enable | disable]
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   state [established | invalid | new | related] [enable | disable]
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   state [established | invalid | new | related] [enable | disable]
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   state [established | invalid | new | related] [enable | disable]
+
+   Match against the state of a packet.
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   time startdate <text>
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   time startdate <text>
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   time startdate <text>
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   time startdate <text>
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   time starttime <text>
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   time starttime <text>
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   time starttime <text>
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   time starttime <text>
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   time stopdate <text>
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   time stopdate <text>
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   time stopdate <text>
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   time stopdate <text>
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   time stoptime <text>
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   time stoptime <text>
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   time stoptime <text>
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   time stoptime <text>
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   time weekdays <text>
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   time weekdays <text>
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   time weekdays <text>
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   time weekdays <text>
+
+   Time to match the defined rule.
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   hop-limit <eq | gt | lt> <0-255>
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   hop-limit <eq | gt | lt> <0-255>
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   hop-limit <eq | gt | lt> <0-255>
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   hop-limit <eq | gt | lt> <0-255>
+
+   Match hop-limit parameter, where 'eq' stands for 'equal'; 'gt' stands for
+   'greater than', and 'lt' stands for 'less than'.
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   recent count <1-255>
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   recent count <1-255>
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   recent count <1-255>
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   recent count <1-255>
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   recent time <second | minute | hour>
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   recent time <second | minute | hour>
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   recent time <second | minute | hour>
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   recent time <second | minute | hour>
+
+   Match when 'count' amount of connections are seen within 'time'. These
+   matching criteria can be used to block brute-force attempts.
+
+********
+Synproxy
+********
+Synproxy connections
+
+.. cfgcmd:: set firewall ipv6 [input | forward] filter rule <1-999999> action synproxy
+.. cfgcmd:: set firewall ipv6 [input | forward] filter rule <1-999999> protocol tcp
+.. cfgcmd:: set firewall ipv6 [input | forward] filter rule <1-999999> synproxy tcp mss <501-65535>
+
+    Set TCP-MSS (maximum segment size) for the connection
+
+.. cfgcmd:: set firewall ipv6 [input | forward] filter rule <1-999999> synproxy tcp window-scale <1-14>
+
+    Set the window scale factor for TCP window scaling
+
+Example synproxy
+================
+Requirements to enable synproxy:
+
+  * Traffic must be symmetric
+  * Synproxy relies on syncookies and TCP timestamps, ensure these are enabled
+  * Disable conntrack loose track option
+
+.. code-block:: none
+
+  set system sysctl parameter net.ipv4.tcp_timestamps value '1'
+
+  set system conntrack tcp loose disable
+  set system conntrack ignore ipv6 rule 10 destination port '8080'
+  set system conntrack ignore ipv6 rule 10 protocol 'tcp'
+  set system conntrack ignore ipv6 rule 10 tcp flags syn
+
+  set firewall global-options syn-cookies 'enable'
+  set firewall ipv6 input filter rule 10 action 'synproxy'
+  set firewall ipv6 input filter rule 10 destination port '8080'
+  set firewall ipv6 input filter rule 10 inbound-interface interface-name 'eth1'
+  set firewall ipv6 input filter rule 10 protocol 'tcp'
+  set firewall ipv6 input filter rule 10 synproxy tcp mss '1460'
+  set firewall ipv6 input filter rule 10 synproxy tcp window-scale '7'
+  set firewall ipv6 input filter rule 1000 action 'drop'
+  set firewall ipv6 input filter rule 1000 state invalid 'enable'
+
+***********************
+Operation-mode Firewall
+***********************
+
+Rule-set overview
+=================
+
+.. opcmd:: show firewall
+
+   This will show you a basic firewall overview
+
+   .. code-block:: none
+
+      vyos@vyos:~$ show firewall 
+      Rulesets Information
+
+      ---------------------------------
+      IPv4 Firewall "forward filter"
+
+      Rule     Action    Protocol      Packets    Bytes  Conditions
+      -------  --------  ----------  ---------  -------  -----------------------------------------
+      5        jump      all                 0        0  iifname "eth1"  jump NAME_VyOS_MANAGEMENT
+      10       jump      all                 0        0  oifname "eth1"  jump NAME_WAN_IN
+      15       jump      all                 0        0  iifname "eth3"  jump NAME_WAN_IN
+      default  accept    all
+
+      ---------------------------------
+      IPv4 Firewall "name VyOS_MANAGEMENT"
+
+      Rule     Action    Protocol      Packets    Bytes  Conditions
+      -------  --------  ----------  ---------  -------  --------------------------------
+      5        accept    all                 0        0  ct state established  accept
+      10       drop      all                 0        0  ct state invalid
+      20       accept    all                 0        0  ip saddr @A_GOOD_GUYS  accept
+      30       accept    all                 0        0  ip saddr @N_ENTIRE_RANGE  accept
+      40       accept    all                 0        0  ip saddr @A_VyOS_SERVERS  accept
+      50       accept    icmp                0        0  meta l4proto icmp  accept
+      default  drop      all                 0        0
+
+      ---------------------------------
+      IPv6 Firewall "forward filter"
+
+      Rule     Action    Protocol
+      -------  --------  ----------
+      5        jump      all
+      10       jump      all
+      15       jump      all
+      default  accept    all
+
+      ---------------------------------
+      IPv6 Firewall "input filter"
+
+      Rule     Action    Protocol
+      -------  --------  ----------
+      5        jump      all
+      default  accept    all
+
+      ---------------------------------
+      IPv6 Firewall "ipv6_name IPV6-VyOS_MANAGEMENT"
+
+      Rule     Action    Protocol
+      -------  --------  ----------
+      5        accept    all
+      10       drop      all
+      20       accept    all
+      30       accept    all
+      40       accept    all
+      50       accept    ipv6-icmp
+      default  drop      all
+
+.. opcmd:: show firewall summary
+
+   This will show you a summary of rule-sets and groups
+
+   .. code-block:: none
+
+      vyos@vyos:~$ show firewall summary 
+      Ruleset Summary
+
+      IPv6 Ruleset:
+
+      Ruleset Hook    Ruleset Priority      Description
+      --------------  --------------------  -------------------------
+      forward         filter
+      input           filter
+      ipv6_name       IPV6-VyOS_MANAGEMENT
+      ipv6_name       IPV6-WAN_IN           PUBLIC_INTERNET
+
+      IPv4 Ruleset:
+
+      Ruleset Hook    Ruleset Priority    Description
+      --------------  ------------------  -------------------------
+      forward         filter
+      input           filter
+      name            VyOS_MANAGEMENT
+      name            WAN_IN              PUBLIC_INTERNET
+
+      Firewall Groups
+
+      Name                     Type                References               Members
+      -----------------------  ------------------  -----------------------  ----------------
+      PBX                      address_group       WAN_IN-100               198.51.100.77
+      SERVERS                  address_group       WAN_IN-110               192.0.2.10
+                                                   WAN_IN-111               192.0.2.11
+                                                   WAN_IN-112               192.0.2.12
+                                                   WAN_IN-120
+                                                   WAN_IN-121
+                                                   WAN_IN-122
+      SUPPORT                  address_group       VyOS_MANAGEMENT-20       192.168.1.2
+                                                   WAN_IN-20
+      PHONE_VPN_SERVERS        address_group       WAN_IN-160               10.6.32.2
+      PINGABLE_ADRESSES        address_group       WAN_IN-170               192.168.5.2
+                                                   WAN_IN-171
+      PBX                      ipv6_address_group  IPV6-WAN_IN-100          2001:db8::1
+      SERVERS                  ipv6_address_group  IPV6-WAN_IN-110          2001:db8::2
+                                                   IPV6-WAN_IN-111          2001:db8::3
+                                                   IPV6-WAN_IN-112          2001:db8::4
+                                                   IPV6-WAN_IN-120
+                                                   IPV6-WAN_IN-121
+                                                   IPV6-WAN_IN-122
+      SUPPORT                  ipv6_address_group  IPV6-VyOS_MANAGEMENT-20  2001:db8::5
+                                                   IPV6-WAN_IN-20
+
+
+.. opcmd:: show firewall ipv6 [forward | input | output] filter
+
+.. opcmd:: show firewall ipv4 name <name>
+
+.. opcmd:: show firewall ipv6 ipv6-name <name>
+
+   This command will give an overview of a single rule-set.
+
+   .. code-block:: none
+
+      vyos@vyos:~$ show firewall ipv4 input filter 
+      Ruleset Information
+
+      ---------------------------------
+      IPv4 Firewall "input filter"
+
+      Rule     Action    Protocol      Packets    Bytes  Conditions
+      -------  --------  ----------  ---------  -------  -----------------------------------------
+      5        jump      all                 0        0  iifname "eth2"  jump NAME_VyOS_MANAGEMENT
+      default  accept    all
+
+.. opcmd:: show firewall ipv6 [forward | input | output]
+   filter rule <1-999999>
+
+.. opcmd:: show firewall ipv4 name <name> rule <1-999999>
+
+.. opcmd:: show firewall ipv6 ipv6-name <name> rule <1-999999>
+
+   This command will give an overview of a rule in a single rule-set
+
+.. opcmd:: show firewall group <name>
+
+   Overview of defined groups. You see the type, the members, and where the
+   group is used.
+
+   .. code-block:: none
+
+      vyos@vyos:~$ show firewall group LAN 
+      Firewall Groups
+
+      Name          Type                References               Members
+      ------------  ------------------  -----------------------  ----------------
+      LAN           ipv6_network_group  IPV6-VyOS_MANAGEMENT-30  2001:db8::0/64
+                                        IPV6-WAN_IN-30
+      LAN           network_group       VyOS_MANAGEMENT-30       192.168.200.0/24
+                                        WAN_IN-30
+
+
+.. opcmd:: show firewall statistics
+
+   This will show you a statistic of all rule-sets since the last boot.
+
+Show Firewall log
+=================
+
+.. opcmd:: show log firewall
+.. opcmd:: show log firewall ipv6
+.. opcmd:: show log firewall ipv6 [forward | input | output | name]
+.. opcmd:: show log firewall ipv6 [forward | input | output] filter
+.. opcmd:: show log firewall ipv6 name <name>
+.. opcmd:: show log firewall ipv6 [forward | input | output] filter rule <rule>
+.. opcmd:: show log firewall ipv6 name <name> rule <rule>
+
+   Show the logs of all firewall; show all ipv6 firewall logs; show all logs
+   for particular hook; show all logs for particular hook and priority; show all logs
+   for particular custom chain; show logs for specific Rule-Set.
+
+Example Partial Config
+======================
+
+.. code-block:: none
+
+  firewall {
+      group {
+          network-group BAD-NETWORKS {
+              network 198.51.100.0/24
+              network 203.0.113.0/24
+          }
+          network-group GOOD-NETWORKS {
+              network 192.0.2.0/24
+          }
+          port-group BAD-PORTS {
+              port 65535
+          }
+      }
+      ipv4 {
+          forward {
+              filter {
+                  default-action accept
+                  rule 5 {
+                      action accept
+                      source {
+                          group {
+                              network-group GOOD-NETWORKS
+                          }
+                      }
+                  }
+                  rule 10 {
+                      action drop
+                      description "Bad Networks"
+                      protocol all
+                      source {
+                          group {
+                              network-group BAD-NETWORKS
+                          }
+                      }
+                  }
+              }
+          }
+      }
+  }
+
+Update geoip database
+=====================
+
+.. opcmd:: update geoip
+
+   Command used to update GeoIP database and firewall sets.