Merge pull request #1422 from srividya0208/fw_log

Modified old option from 'enable-default-log' to new one 'default-log'

3 files changed, 13 insertions, 13 deletions

diff --git a/docs/configuration/firewall/bridge.rst b/docs/configuration/firewall/bridge.rst
index 9fb019c5..bba9e56f 100644
--- a/docs/configuration/firewall/bridge.rst
+++ b/docs/configuration/firewall/bridge.rst
@@ -157,8 +157,8 @@ log options can be defined.
    Enable logging for the matched packet. If this configuration command is not
    present, then log is not enabled.
 
-.. cfgcmd:: set firewall bridge forward filter enable-default-log
-.. cfgcmd:: set firewall bridge name <name> enable-default-log
+.. cfgcmd:: set firewall bridge forward filter default-log
+.. cfgcmd:: set firewall bridge name <name> default-log
 
    Use this command to enable the logging of the default action on
    the specified chain.
@@ -325,7 +325,7 @@ Configuration example:
 .. code-block:: none
 
    set firewall bridge forward filter default-action 'drop'
-   set firewall bridge forward filter enable-default-log
+   set firewall bridge forward filter default-log
    set firewall bridge forward filter rule 10 action 'continue'
    set firewall bridge forward filter rule 10 inbound-interface name 'eth2'
    set firewall bridge forward filter rule 10 vlan id '22'
@@ -341,7 +341,7 @@ Configuration example:
    set firewall bridge forward filter rule 40 destination mac-address '66:55:44:33:22:11'
    set firewall bridge forward filter rule 40 source mac-address '11:22:33:44:55:66'
    set firewall bridge name TEST default-action 'accept'
-   set firewall bridge name TEST enable-default-log
+   set firewall bridge name TEST default-log
    set firewall bridge name TEST rule 10 action 'continue'
    set firewall bridge name TEST rule 10 log
    set firewall bridge name TEST rule 10 vlan priority '0'
diff --git a/docs/configuration/firewall/ipv4.rst b/docs/configuration/firewall/ipv4.rst
index ff739418..1cf50810 100644
--- a/docs/configuration/firewall/ipv4.rst
+++ b/docs/configuration/firewall/ipv4.rst
@@ -206,10 +206,10 @@ log options can be defined.
    Enable logging for the matched packet. If this configuration command is not
    present, then log is not enabled.
 
-.. cfgcmd:: set firewall ipv4 forward filter enable-default-log
-.. cfgcmd:: set firewall ipv4 input filter enable-default-log
-.. cfgcmd:: set firewall ipv4 output filter enable-default-log
-.. cfgcmd:: set firewall ipv4 name <name> enable-default-log
+.. cfgcmd:: set firewall ipv4 forward filter default-log
+.. cfgcmd:: set firewall ipv4 input filter default-log
+.. cfgcmd:: set firewall ipv4 output filter default-log
+.. cfgcmd:: set firewall ipv4 name <name> default-log
 
    Use this command to enable the logging of the default action on
    the specified chain.
diff --git a/docs/configuration/firewall/ipv6.rst b/docs/configuration/firewall/ipv6.rst
index 0aa8a137..c679ffd5 100644
--- a/docs/configuration/firewall/ipv6.rst
+++ b/docs/configuration/firewall/ipv6.rst
@@ -206,10 +206,10 @@ log options can be defined.
    Enable logging for the matched packet. If this configuration command is not
    present, then log is not enabled.
 
-.. cfgcmd:: set firewall ipv6 forward filter enable-default-log
-.. cfgcmd:: set firewall ipv6 input filter enable-default-log
-.. cfgcmd:: set firewall ipv6 output filter enable-default-log
-.. cfgcmd:: set firewall ipv6 name <name> enable-default-log
+.. cfgcmd:: set firewall ipv6 forward filter default-log
+.. cfgcmd:: set firewall ipv6 input filter default-log
+.. cfgcmd:: set firewall ipv6 output filter default-log
+.. cfgcmd:: set firewall ipv6 name <name> default-log
 
    Use this command to enable the logging of the default action on
    the specified chain.
@@ -1177,7 +1177,7 @@ Example Partial Config
               }
               name INP-ETH1 {
                   default-action drop
-                  enable-default-log
+                  default-log
                   rule 10 {
                       action accept
                       protocol tcp_udp