Migrate new file structure to crux (#435)

* order workflows and add submodule

* rename gitmodules file

* delete docs/.gitignore

* add vyos custom linter

* correct __pycache__ in gitignore

* add test-coverage.py

* move draw.io folder

* arrange changelog, install history and about

* arrange: firewall

* arrange: highavailability

* arrange: loadbalancing

* arrange: nat

* arrange: services

* sort configexamples and configuration interfaces

* wireles: rename wireless

* rearrange: Protocols and Policy

* rearrange: Firewall and Zone Policy

* rearrange: Interfaces

* rearrange: Interfaces

* rearrange: dynamic DNS

* hostinfo: add page to index

* rearrange: appendix

* venv: add Pipfile

* rearrange: contributing

* index: remove debugging

* rearrange: fix all figure and refs

* rearrange: commandtree

* fix: cli, openvpn, install headline level

* protocols: change headline

* firewall: move mss clamping

* ip: separate ipv4 and ipv6

* arp: move to static page

* igmp: rename multicast page

* Update to year 2021

1 files changed, 104 insertions, 0 deletions

diff --git a/docs/configuration/interfaces/bridge.rst b/docs/configuration/interfaces/bridge.rst
new file mode 100644
index 00000000..30ece53d
--- /dev/null
+++ b/docs/configuration/interfaces/bridge.rst
@@ -0,0 +1,104 @@
+Bridging
+--------
+
+Interfaces in VyOS can be bridged together to provide software switching of
+Layer-2 traffic.
+
+A bridge is created when a bridge interface is defined. In the example below
+we will be creating a bridge for VLAN 100 and assigning a VIF to the bridge.
+
+.. code-block:: none
+
+  set interfaces bridge 'br100'
+  set interfaces ethernet eth1 vif 100 bridge-group bridge br100
+    
+Interfaces assigned to a bridge-group do not have address configuration. An IP
+address can be assigned to the bridge interface itself, however, like any
+normal interface.
+
+.. code-block:: none
+
+  set interfaces bridge br100 address '192.168.100.1/24'
+  set interfaces bridge br100 address '2001:db8:100::1/64'
+
+Example Result:
+
+.. code-block:: none
+
+  bridge br100 {
+      address 192.168.100.1/24
+      address 2001:db8:100::1/64
+  }
+  [...]
+  ethernet eth1 {
+  [...]
+      vif 100 {
+          bridge-group {
+              bridge br100
+          }
+      }
+  }
+
+In addition to normal IP interface configuration, bridge interfaces support
+Spanning-Tree Protocol. STP is disabled by default.
+
+.. note:: Please use caution when introducing spanning-tree protocol on a
+   network as it may result in topology changes.
+
+To enable spanning-tree use the
+`set interfaces bridge <name> stp true` command:
+
+.. code-block:: none
+
+  set interfaces bridge br100 stp true
+
+STP `priority`, `forwarding-delay`, `hello-time`, and `max-age` can be
+configured for the bridge-group. The MAC aging time can also be configured
+using the `aging` directive.
+
+For member interfaces, the bridge-group `priority` and `cost` can be
+configured.
+
+The `show bridge` operational command can be used to display configured
+bridges:
+
+.. code-block:: none
+
+  vyos@vyos:~$ show bridge
+  bridge name     bridge id               STP enabled     interfaces
+  br100           0000.000c29443b19       yes             eth1.100
+
+If spanning-tree is enabled, the `show bridge <name> spanning-tree` command
+can be used to show STP configuration:
+
+.. code-block:: none
+
+  vyos@vyos:~$ show bridge br100 spanning-tree
+  br100
+   bridge id              0000.000c29443b19
+   designated root        0000.000c29443b19
+   root port                 0                    path cost                  0
+   max age                  20.00                 bridge max age            20.00
+   hello time                2.00                 bridge hello time          2.00
+   forward delay            15.00                 bridge forward delay      15.00
+   ageing time             300.00
+   hello timer               0.47                 tcn timer                  0.00
+   topology change timer     0.00                 gc timer                  64.63
+   flags
+
+  eth1.100 (1)
+   port id                8001                    state                forwarding
+   designated root        0000.000c29443b19       path cost                  4
+   designated bridge      0000.000c29443b19       message age timer          0.00
+   designated port        8001                    forward delay timer        0.00
+   designated cost           0                    hold timer                 0.00
+   flags
+
+The MAC address-table for a bridge can be displayed using the
+`show bridge <name> macs` command:
+
+.. code-block:: none
+
+  vyos@vyos:~$ show bridge br100 macs
+  port no mac addr                is local?       ageing timer
+    1     00:0c:29:44:3b:19       yes                0.00