wwan: adjust documentation to latest CLI syntax version

1 files changed, 0 insertions, 128 deletions

diff --git a/docs/configuration/interfaces/wirelessmodem.rst b/docs/configuration/interfaces/wirelessmodem.rst
deleted file mode 100644
index a65a47f4..00000000
--- a/docs/configuration/interfaces/wirelessmodem.rst
+++ /dev/null
@@ -1,128 +0,0 @@
-.. _wwan-interface:
-
-####################
-WirelessModem (WWAN)
-####################
-
-The wirelessmodem interface provides access (through a wireless modem/wwan)
-to wireless networks provided by various cellular providers. VyOS uses the
-interfaces wirelessmodem subsystem for configuration.
-
-*************
-Configuration
-*************
-
-Common interface configuration
-==============================
-
-.. cmdinclude:: /_include/interface-description.txt
-   :var0: wirelessmodem
-   :var1: wlm0
-
-.. cmdinclude:: /_include/interface-disable.txt
-   :var0: wirelessmodem
-   :var1: wlm0
-
-.. cmdinclude:: /_include/interface-vrf.txt
-   :var0: wirelessmodem
-   :var1: wlm0
-
-WirelessModem (WWAN) options
-============================
-
-.. cfgcmd:: set interfaces wirelessmodem <interface> apn <apn>
-
-   Every WWAN connection requires an :abbr:`APN (Access Point Name)` which is
-   used by the client to dial into the ISPs network. This is a mandatory
-   parameter. Contact your Service Provider for correct APN.
-
-.. cfgcmd:: set interfaces wirelessmodem <interface> backup distance <metric>
-
-   Configure metric of the default route added via the Wireless Modem interface.
-   The default metric if not specified is 10.
-
-.. cfgcmd:: set interfaces wirelessmodem <interface> device <tty>
-
-   Device identifier of the underlaying physical interface. This is usually a
-   ttyUSB device, if not configured this defaults to ttyUSB2.
-
-.. cfgcmd:: set interfaces wirelessmodem <interface> no-peer-dns
-
-   Do not install DNS nameservers received from ISP into system wide nameserver
-   list.
-
-.. cfgcmd:: set interfaces wirelessmodem <interface> connect-on-demand
-
-   When set the interface is enabled for "dial-on-demand".
-
-   Use this command to instruct the system to establish a PPP connection
-   automatically once traffic passes through the interface. A disabled on-demand
-   connection is established at boot time and remains up. If the link fails for
-   any reason, the link is brought back up immediately.
-
-*********
-Operation
-*********
-
-.. opcmd:: show interfaces wirelessmodem <interface>
-
-   Retrive interface information from given WWAN interface.
-
-   .. code-block:: none
-
-     vyos@vyos:~$ show interfaces wirelessmodem wlm0
-     wlm0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master black state UNKNOWN group default qlen 3
-         link/ppp
-         inet 10.26.238.93 peer 10.64.64.64/32 scope global wlm0
-            valid_lft forever preferred_lft forever
-         Description: baaar
-
-         RX:  bytes    packets     errors    dropped    overrun      mcast
-                 38          5          0          0          0          0
-         TX:  bytes    packets     errors    dropped    carrier collisions
-                217          8          0          0          0          0
-
-.. opcmd:: show interfaces wirelessmodem <interface> statistics
-
-   Retrive interface statistics from given WWAN interface.
-
-   .. code-block:: none
-
-     vyos@vyos:~$ show interfaces wirelessmodem wlm0 statistics
-         IN   PACK VJCOMP  VJUNC  VJERR  |      OUT   PACK VJCOMP  VJUNC NON-VJ
-         38      5      0      0      0  |      217      8      0      0      8
-
-.. opcmd:: show interfaces wirelessmodem <interface> log
-
-   Displays log information for a WWAN interface.
-
-
-*******
-Example
-*******
-
-The following example is based on a Sierra Wireless MC7710 miniPCIe card (only
-the form factor in reality it runs UBS) and Deutsche Telekom as ISP. The card
-is assembled into a :ref:`pc-engines-apu4`.
-
-.. code-block:: none
-
-  set interfaces wirelessmodem wlm0 apn 'internet.telekom'
-  set interfaces wirelessmodem wlm0 backup distance '100'
-  set interfaces wirelessmodem wlm0 device 'ttyUSB2'
-  set interfaces wirelessmodem wlm0 disable
-  set interfaces wirelessmodem wlm0 no-peer-dns
-
-*****************
-Supported Modules
-*****************
-
-The following hardware modules have been tested successfully in an
-:ref:`pc-engines-apu4` board:
-
-* Sierra Wireless AirPrime MC7304 miniPCIe card (LTE)
-* Sierra Wireless AirPrime MC7430 miniPCIe card (LTE)
-* Sierra Wireless AirPrime MC7455 miniPCIe card (LTE)
-* Sierra Wireless AirPrime MC7710 miniPCIe card (LTE)
-* Huawei ME909u-521 miniPCIe card (LTE)
-* Huawei ME909s-120 miniPCIe card (LTE)