Split dhcp-relay docs out of dhcp-server page

1 files changed, 0 insertions, 160 deletions

diff --git a/docs/configuration/service/dhcp-server.rst b/docs/configuration/service/dhcp-server.rst
index 3946256e..28dddb2f 100644
--- a/docs/configuration/service/dhcp-server.rst
+++ b/docs/configuration/service/dhcp-server.rst
@@ -1,5 +1,3 @@
-.. _dhcp:
-
 .. _dhcp-server:
 
 ###########
@@ -621,161 +619,3 @@ Operation Mode
 
    Show only leases with the specified state. Possible states: abandoned,
    active, all, backup, expired, free, released, reset (default = active)
-
-##########
-DHCP Relay
-##########
-
-If you want your router to forward DHCP requests to an external DHCP server
-you can configure the system to act as a DHCP relay agent. The DHCP relay
-agent works with IPv4 and IPv6 addresses.
-
-All interfaces used for the DHCP relay must be configured.
-
-**********
-IPv4 relay
-**********
-
-Configuration
-=============
-
-.. cfgcmd:: set service dhcp-relay interface <interface>
-
-   Enable the DHCP relay service on the given interface.
-
-.. cfgcmd:: set service dhcp-relay server <server>
-
-   Configure IP address of the DHCP `<server>` which will handle the relayed
-   packets.
-
-.. cfgcmd:: set service dhcp-relay relay-options relay-agents-packets discard
-
-   The router should discard DHCP packages already containing relay agent
-   information to ensure that only requests from DHCP clients are forwarded.
-
-Options
--------
-
-.. cfgcmd:: set service dhcp-relay relay-options hop-count <count>
-
-   Set the maximum hop `<count>` before packets are discarded. Range 0...255,
-   default 10.
-
-.. cfgcmd:: set service dhcp-relay relay-options max-size <size>
-
-   Set maximum `<size>` of DHCP packets including relay agent information. If a
-   DHCP packet size surpasses this value it will be forwarded without appending
-   relay agent information. Range 64...1400, default 576.
-
-.. cfgcmd:: set service dhcp-relay relay-options relay-agents-packet
-   <append | discard | forward | replace>
-
-   Four policies for reforwarding DHCP packets exist:
-
-   * **append:** The relay agent is allowed to append its own relay information
-     to a received DHCP packet, disregarding relay information already present
-     in the packet.
-
-   * **discard:** Received packets which already contain relay information will
-     be discarded.
-
-   * **forward:** All packets are forwarded, relay information already present
-     will be ignored.
-
-   * **replace:** Relay information already present in a packet is stripped and
-     replaced with the router's own relay information set.
-
-Example
-=======
-
-* Listen for DHCP requests on interface ``eth1``.
-* DHCP server is located at IPv4 address 10.0.1.4.
-* Router receives DHCP client requests on ``eth1`` and relays them to the server
-  at 10.0.1.4.
-
-.. figure:: /_static/images/service_dhcp-relay01.png
-   :scale: 80 %
-   :alt: DHCP relay example
-
-   DHCP relay example
-
-The generated configuration will look like:
-
-.. code-block:: none
-
-  show service dhcp-relay
-      interface eth1
-      server 10.0.1.4
-      relay-options {
-         relay-agents-packets discard
-      }
-
-Operation
-=========
-
-.. opcmd:: restart dhcp relay-agent
-
-   Restart DHCP relay service
-
-**********
-IPv6 relay
-**********
-
-Configuration
-=============
-
-.. cfgcmd:: set service dhcpv6-relay listen-interface <interface>
-
-   Set eth1 to be the listening interface for the DHCPv6 relay.
-
-   Multiple interfaces may be specified.
-
-.. cfgcmd:: set service dhcpv6-relay upstream-interface <interface>
-   address <server>
-
-   Specifies an upstream network `<interface>` from which replies from
-   `<server>` and other relay agents will be accepted.
-
-Options
--------
-
-.. cfgcmd:: set service dhcpv6-relay max-hop-count 'count'
-
-   Set maximum hop count before packets are discarded, default: 10
-
-.. cfgcmd:: set service dhcpv6-relay use-interface-id-option
-
-   If this is set the relay agent will insert the interface ID. This option is
-   set automatically if more than one listening interfaces are in use.
-
-Example
-=======
-
-* DHCPv6 requests are received by the router on `listening interface` ``eth1``
-* Requests are forwarded through ``eth2`` as the `upstream interface`
-* External DHCPv6 server is at 2001:db8::4
-
-.. figure:: /_static/images/service_dhcpv6-relay01.png
-   :scale: 80 %
-   :alt: DHCPv6 relay example
-
-   DHCPv6 relay example
-
-The generated configuration will look like:
-
-.. code-block:: none
-
-  commit
-  show service dhcpv6-relay
-      listen-interface eth1 {
-      }
-      upstream-interface eth2 {
-         address 2001:db8::4
-      }
-
-Operation
-=========
-
-.. opcmd:: restart dhcpv6 relay-agent
-
-   Restart DHCPv6 relay agent immediately.