autosectionlabel: add custom headline ref

4 files changed, 23 insertions, 0 deletions

diff --git a/docs/configuration/service/dhcp-relay.rst b/docs/configuration/service/dhcp-relay.rst
index 5355a0fd..c0394dff 100644
--- a/docs/configuration/service/dhcp-relay.rst
+++ b/docs/configuration/service/dhcp-relay.rst
@@ -99,6 +99,8 @@ Operation
 IPv6 relay
 **********
 
+.. _dhcp-relay:ipv6_configuration:
+
 Configuration
 =============
 
@@ -114,6 +116,8 @@ Configuration
    Specifies an upstream network `<interface>` from which replies from
    `<server>` and other relay agents will be accepted.
 
+.. _dhcp-relay:ipv6_options:
+
 Options
 -------
 
@@ -126,6 +130,8 @@ Options
    If this is set the relay agent will insert the interface ID. This option is
    set automatically if more than one listening interfaces are in use.
 
+.. _dhcp-relay:ipv6_example:
+
 Example
 =======
 
@@ -151,6 +157,8 @@ The generated configuration will look like:
          address 2001:db8::4
       }
 
+.. _dhcp-relay:ipv6_op_cmd:
+
 Operation
 =========
 
diff --git a/docs/configuration/service/dhcp-server.rst b/docs/configuration/service/dhcp-server.rst
index 3f435605..0e0d82c6 100644
--- a/docs/configuration/service/dhcp-server.rst
+++ b/docs/configuration/service/dhcp-server.rst
@@ -317,6 +317,8 @@ Example
 
 Please see the :ref:`dhcp-dns-quick-start` configuration.
 
+.. _dhcp-server:v4_example_failover:
+
 Failover
 --------
 
@@ -357,6 +359,7 @@ Common configuration, valid for both primary and secondary node.
   set service dhcp-server shared-network-name NET-VYOS subnet 192.0.2.0/24 failover peer-address '192.168.189.252'
   set service dhcp-server shared-network-name NET-VYOS subnet 192.0.2.0/24 failover status 'primary'
 
+.. _dhcp-server:v4_example_raw:
 
 Raw Parameters
 --------------
@@ -456,6 +459,8 @@ IPv6 server
 VyOS also provides DHCPv6 server functionality which is described in this
 section.
 
+.. _dhcp-server:v6_config:
+
 Configuration
 =============
 
@@ -557,6 +562,8 @@ The configuration will look as follows:
           }
       }
 
+.. _dhcp-server:v6_static_mapping:
+
 Static mappings
 ---------------
 
@@ -603,6 +610,8 @@ The configuration will look as follows:
 
 .. start_vyoslinter
 
+.. _dhcp-server:v6_op_cmd:
+
 Operation Mode
 ==============
 
diff --git a/docs/configuration/service/dns.rst b/docs/configuration/service/dns.rst
index 5ee17490..ccf5a7d0 100644
--- a/docs/configuration/service/dns.rst
+++ b/docs/configuration/service/dns.rst
@@ -177,6 +177,8 @@ one involves a third party service, like DynDNS.com or any other similar
 website. This method uses HTTP requests to transmit the new IP address. You
 can configure both in VyOS.
 
+.. _dns:dynmaic_config:
+
 Configuration
 =============
 
@@ -218,6 +220,8 @@ Configuration
    Configure optional TTL value on the given resource record. This defaults to
    600 seconds.
 
+.. _dns:dynmaic_example:
+
 Example
 ^^^^^^^
 
diff --git a/docs/configuration/service/snmp.rst b/docs/configuration/service/snmp.rst
index 4a5a2780..36dc1787 100644
--- a/docs/configuration/service/snmp.rst
+++ b/docs/configuration/service/snmp.rst
@@ -139,6 +139,8 @@ The securityapproach in v3 targets:
 
 * Authentication – to verify that the message is from a valid source.
 
+.. _snmp:v3_example:
+
 Example
 ^^^^^^^