Merge pull request #1 from vyos/master

Update fork

1 files changed, 182 insertions, 0 deletions

diff --git a/docs/configuration/system/ipv6.rst b/docs/configuration/system/ipv6.rst
new file mode 100644
index 00000000..cba5c0e0
--- /dev/null
+++ b/docs/configuration/system/ipv6.rst
@@ -0,0 +1,182 @@
+####
+IPv6
+####
+
+System configuration commands
+-----------------------------
+
+.. cfgcmd:: set system ipv6 disable
+
+   Use this command to disable assignment of IPv6 addresses on all
+   interfaces.
+
+.. cfgcmd:: set system ipv6 disable-forwarding
+
+   Use this command to disable IPv6 forwarding on all interfaces.
+
+.. cfgcmd:: set system ipv6 neighbor table-size <number>
+
+   Use this command to define the maximum number of entries to keep in
+   the Neighbor cache (1024, 2048, 4096, 8192, 16384, 32768).
+
+.. cfgcmd:: set system ipv6 strict-dad
+
+   Use this command to disable IPv6 operation on interface when
+   Duplicate Address Detection fails on Link-Local address.
+
+.. cfgcmd:: set system ipv6 multipath layer4-hashing
+
+   Use this command to user Layer 4 information for ECMP hashing.
+
+
+Operational commands
+--------------------
+
+Show commands
+^^^^^^^^^^^^^
+
+.. opcmd:: show ipv6 neighbors
+
+   Use this command to show IPv6 Neighbor Discovery Protocol information.
+
+.. opcmd:: show ipv6 groups
+
+   Use this command to show IPv6 multicast group membership.
+
+.. opcmd:: show ipv6 forwarding
+
+   Use this command to show IPv6 forwarding status.
+
+.. opcmd:: show ipv6 route
+
+   Use this command to show IPv6 routes.
+
+   Check the many parameters available for the `show ipv6 route` command:
+
+   .. code-block:: none
+
+      vyos@vyos:~$ show ipv6 route
+      Possible completions:
+        <Enter>       Execute the current command
+        <X:X::X:X>    Show IPv6 routes of given address or prefix
+        <X:X::X:X/M>
+        bgp           Show IPv6 BGP routes
+        cache         Show kernel IPv6 route cache
+        connected     Show IPv6 connected routes
+        forward       Show kernel IPv6 route table
+        isis          Show IPv6 ISIS routes
+        kernel        Show IPv6 kernel routes
+        ospfv3        Show IPv6 OSPF6 routes
+        ripng         Show IPv6 RIPNG routes
+        static        Show IPv6 static routes
+        summary       Show IPv6 routes summary
+        table         Show IP routes in policy table
+        vrf           Show IPv6 routes in VRF
+
+
+.. opcmd:: show ipv6 prefix-list
+
+   Use this command to show all IPv6 prefix lists
+
+   There are different parameters for getting prefix-list information:
+
+   .. code-block:: none
+
+      vyos@vyos:~$ show ipv6 prefix-list
+      Possible completions:
+        <Enter>       Execute the current command
+        <WORD>        Show specified IPv6 prefix-list
+        detail        Show detail of IPv6 prefix-lists
+        summary       Show summary of IPv6 prefix-lists
+
+.. opcmd:: show ipv6 access-list
+
+   Use this command to show all IPv6 access lists
+
+   You can also specify which IPv6 access-list should be shown:
+
+   .. code-block:: none
+
+      vyos@vyos:~$ show ipv6 access-list
+      Possible completions:
+        <Enter>       Execute the current command
+        <text>        Show specified IPv6 access-list
+
+.. opcmd:: show ipv6 bgp
+
+   Use this command to show IPv6 Border Gateway Protocol information.
+
+
+   In addition, you can specify many other parameters to get BGP
+   information:
+
+   .. code-block:: none
+
+      vyos@vyos:~$ show ipv6 bgp
+      Possible completions:
+        <Enter>       Execute the current command
+        <X:X::X:X>    Show BGP information for given address or prefix
+        <X:X::X:X/M>
+        community     Show routes matching the communities
+        community-list
+                      Show routes matching the community-list
+        filter-list   Show routes conforming to the filter-list
+        large-community
+                      Show routes matching the large-community-list
+        large-community-list
+        neighbors     Show detailed information on TCP and BGP neighbor connections
+        prefix-list   Show routes matching the prefix-list
+        regexp        Show routes matching the AS path regular expression
+        route-map     Show BGP routes matching the specified route map
+        summary       Show summary of BGP neighbor status
+
+
+.. opcmd:: show ipv6 ospfv3
+
+   Use this command to get information about OSPFv3.
+
+   You can get more specific OSPFv3 information by using the parameters
+   shown below:
+
+   .. code-block:: none
+
+      vyos@vyos:~$ show ipv6 ospfv3
+      Possible completions:
+        <Enter>       Execute the current command
+        area          Show OSPFv3 spf-tree information
+        border-routers
+                      Show OSPFv3 border-router (ABR and ASBR) information
+        database      Show OSPFv3 Link state database information
+        interface     Show OSPFv3 interface information
+        linkstate     Show OSPFv3 linkstate routing information
+        neighbor      Show OSPFv3 neighbor information
+        redistribute  Show OSPFv3 redistribute External information
+        route         Show OSPFv3 routing table information
+
+.. opcmd:: show ipv6 ripng
+
+   Use this command to get information about the RIPNG protocol
+
+.. opcmd:: show ipv6 ripng status
+
+   Use this command to show the status of the RIPNG protocol
+
+
+Reset commands
+^^^^^^^^^^^^^^
+
+.. opcmd:: reset ipv6 bgp <address>
+
+   Use this command to clear Border Gateway Protocol statistics or
+   status.
+
+
+.. opcmd:: reset ipv6 neighbors <address | interface>
+
+   Use this command to reset IPv6 Neighbor Discovery Protocol cache for
+   an address or interface.
+
+.. opcmd:: reset ipv6 route cache
+
+   Use this command to flush the kernel IPv6 route cache.
+   An address can be added to flush it only for that route.
\ No newline at end of file