fix build errors after arrange

5 files changed, 66 insertions, 26 deletions

diff --git a/docs/configuration/firewall/index.rst b/docs/configuration/firewall/index.rst
index 2615774f..e95ecb53 100644
--- a/docs/configuration/firewall/index.rst
+++ b/docs/configuration/firewall/index.rst
@@ -1,11 +1,12 @@
 .. _firewall:
 
+########
 Firewall
-========
-
+########
 
+********
 Overview
---------
+********
 
 VyOS makes use of Linux `netfilter <https://netfilter.org/>`_ for packet
 filtering.
@@ -24,8 +25,9 @@ or zone based firewall policy.
    OS, is a reference to as `local` with respect to its input interface.
 
 
+***************
 Global settings
----------------
+***************
 
 Some firewall settings are global and have a affect on the whole system.
 
@@ -140,8 +142,9 @@ Some firewall settings are global and have a affect on the whole system.
    Set the global setting for related connections.
 
 
+******
 Groups
-------
+******
 
 Firewall groups represent collections of IP addresses, networks, or
 ports. Once created, a group can be referenced by firewall rules as
@@ -158,7 +161,7 @@ names.
 
 
 Address Groups
-**************
+==============
 
 In a **address group** a single IP adresses or IP address ranges are
 definded.
@@ -182,7 +185,7 @@ definded.
 
 
 Network Groups
-**************
+==============
 
 While **network groups** accept IP networks in CIDR notation, specific
 IP addresses can be added as a 32-bit prefix. If you foresee the need
@@ -207,7 +210,7 @@ recommended.
       
 
 Port Groups
-***********
+===========
 
 A **port group** represents only port numbers, not the protocol. Port
 groups can be referenced for either TCP or UDP. It is recommended that
@@ -232,8 +235,9 @@ filtering unnecessary ports. Ranges of ports can be specified by using
    Provide a port group description.
 
 
+*********
 Rule-Sets
-----------
+*********
 
 A rule-set is a named collection of firewall rules that can be applied
 to an interface or zone. Each rule is numbered, has an action to apply
@@ -281,7 +285,7 @@ the action of the rule will executed.
    If you want to disable a rule but let it in the configuration.
 
 Matching criteria
-*****************
+=================
 
 There are a lot of matching criteria gainst which the package can be tested.
 
@@ -413,8 +417,9 @@ There are a lot of matching criteria gainst which the package can be tested.
    Match against the state of a packet.
 
 
+***********************************
 Applying a Rule-Set to an Interface
------------------------------------
+***********************************
 
 A Rule-Set can be appliend to every inteface:
 
@@ -439,8 +444,9 @@ A Rule-Set can be appliend to every inteface:
       several interfaces. An interface can only have one rule-set per chain.
 
 
+**************************
 Zone-based Firewall Policy
---------------------------
+**************************
 
 As an alternative to applying policy to an interface directly, a
 zone-based firewall can be created to simplify configuration when
@@ -453,7 +459,7 @@ An basic introduction to zone-based firewalls can be found `here
 and an example at :ref:`examples-zone-policy`.
 
 Define a Zone
-*************
+=============
 
 To define a zone setup either one with interfaces or a local zone.
 
@@ -477,7 +483,7 @@ To define a zone setup either one with interfaces or a local zone.
 
 
 Applying a Rule-Set to a Zone
-*****************************
+=============================
 
 Before you are able to apply a rule-set to a zone you have to create the zones 
 first. 
@@ -496,11 +502,12 @@ first.
       set zone-policy zone LAN from DMZ firewall name DMZv4-to-LANv4
 
 
+***********************
 Operation-mode Firewall
------------------------
+***********************
 
 Rule-set overview
-*****************
+=================
 
 .. opcmd:: show firewall
 
@@ -663,7 +670,7 @@ Rule-set overview
 
 
 Zone-Policy Overview
-********************
+====================
 
 .. opcmd:: show zone-policy zone <name>
 
@@ -684,7 +691,7 @@ Zone-Policy Overview
 
 
 Show Firewall log
-*****************
+=================
 
 .. opcmd:: show log firewall [name | ipv6name] <name>
 
@@ -698,7 +705,7 @@ Show Firewall log
 
 
 Example Partial Config
-----------------------
+======================
 
 .. code-block:: none
 
@@ -770,9 +777,10 @@ Example Partial Config
 
 .. _routing-mss-clamp:
 
-################
+
+****************
 TCP-MSS Clamping
-################
+****************
 
 As Internet wide PMTU discovery rarely works, we sometimes need to clamp
 our TCP MSS value to a specific value. This is a field in the TCP
@@ -788,9 +796,11 @@ value for IPv4 and IPv6.
    in 1452 bytes on a 1492 byte MTU.
 
 
+
 IPv4
 ====
 
+
 .. cfgcmd:: set firewall options interface <interface> adjust-mss <number-of-bytes>
 
    Use this command to set the maximum segment size for IPv4 transit
@@ -808,6 +818,8 @@ for your WireGuard `wg02` tunnel.
   set firewall options interface pppoe0 adjust-mss '1452'
   set firewall options interface wg02 adjust-mss '1372'
 
+
+
 IPv6
 ====
 
diff --git a/docs/configuration/protocols/static.rst b/docs/configuration/protocols/static.rst
index fbde8228..43b77c41 100644
--- a/docs/configuration/protocols/static.rst
+++ b/docs/configuration/protocols/static.rst
@@ -15,8 +15,9 @@ collection of all routes the router has learned from its configuration or from
 its dynamic routing protocols is stored in the RIB. Unicast routes are directly
 used to determine the forwarding table used for unicast packet forwarding.
 
+*************
 Static Routes
-#############
+*************
 
 .. cfgcmd:: set protocols static route <subnet> next-hop <address>
 
@@ -152,8 +153,9 @@ provided by the Neighbor Discovery Protocol (NDP).
 To manipulate or display ARP_ table entries, the following commands are
 implemented.
 
+*********
 Configure
-=========
+*********
 
 .. cfgcmd:: set protocols static arp <address> hwaddr <mac>
 
@@ -166,8 +168,11 @@ Configure
 
      set protocols static arp 192.0.2.100 hwaddr 00:53:27:de:23:aa
 
+
+*********
 Operation
-=========
+*********
+
 
 .. opcmd:: show protocols static arp
 
diff --git a/docs/configuration/system/index.rst b/docs/configuration/system/index.rst
index ecf09a64..4bb16c42 100644
--- a/docs/configuration/system/index.rst
+++ b/docs/configuration/system/index.rst
@@ -22,7 +22,7 @@ System
    name-server
    name-servers-dhcp
    ntp
-   options
+   option
    proxy
    static-host-mapping
    sysctl
@@ -30,3 +30,11 @@ System
    task-scheduler
    time-zone
    wifi-requlatory-domain
+
+
+.. toctree::
+   :maxdepth: 1
+   :includehidden:
+
+   default-route
+   eventhandler
diff --git a/docs/configuration/vpn/index.rst b/docs/configuration/vpn/index.rst
index 397093c2..abaca198 100644
--- a/docs/configuration/vpn/index.rst
+++ b/docs/configuration/vpn/index.rst
@@ -12,4 +12,15 @@ VPN
    openconnect
    pptp
    rsa-keys
-   sstp
\ No newline at end of file
+   sstp
+
+
+
+pages to sort
+
+.. toctree::
+   :maxdepth: 1
+   :includehidden:
+
+   dmvpn
+   site2site_ipsec
\ No newline at end of file
diff --git a/docs/configuration/vpn/rsa-keys.rst b/docs/configuration/vpn/rsa-keys.rst
new file mode 100644
index 00000000..9f289d0d
--- /dev/null
+++ b/docs/configuration/vpn/rsa-keys.rst
@@ -0,0 +1,4 @@
+
+########
+RSA-Keys
+########
\ No newline at end of file