interfaces: delete obsolete addresses.rst

1 files changed, 0 insertions, 174 deletions

diff --git a/docs/interfaces/addresses.rst b/docs/interfaces/addresses.rst
deleted file mode 100644
index 3fc9b89b..00000000
--- a/docs/interfaces/addresses.rst
+++ /dev/null
@@ -1,174 +0,0 @@
-.. _interfaces-addresses:
-
-Addresses
----------
-
-Each interface can be configured with a description and address. Interface
-addresses might be:
-
-* Static IPv4 ``address 172.16.51.129/24``
-* Static IPv6 ``address 2001:db8:1::ffff/64``
-* DHCP IPv4 ``address dhcp``
-* DHCP IPv6 ``address dhcpv6``
-
-.. cfgcmd:: set interfaces ethernet eth0 description 'OUTSIDE'
-
-   An interface description is assigned using the following command:
-
-IPv4
-^^^^
-
-Static Address
-**************
-
-This method is supported on all interfaces, apart from OpenVPN that uses
-different syntax and wireless modems that are always autoconfigured through
-PPP.
-
-The command is ``set interfaces $type $name address $address``. Examples:
-
-.. code-block:: none
-
-  set interfaces ethernet eth0 address 192.0.2.1/24
-  set interfaces tunnel tun0 address 10.0.0.1/30
-  set interfaces bridge br0 address 203.0.113.45/26
-  set interfaces ethernet eth0 vif 30 address 198.51.100.254/24
-
-DHCP
-****
-
-This method is supported on all physical interfaces, and those that are
-directly connected to a physical interface (Ethernet, VLAN, Bridge, Bond,
-Pseudo-ethernet, Wireless).
-
-The command is ``set interfaces $type $name address dhcp``. Examples:
-
-.. code-block:: none
-
-  set interfaces ethernet eth0 vif 90 address dhcp
-  set interfaces bridge br0 address dhcp
-
-IPv6
-^^^^
-
-Static Address
-**************
-
-This method is supported on all interfaces, apart from OpenVPN that uses
-different syntax and wireless modems that are always autoconfigured through
-PPP. Static IPv6 addresses are supported on all interfaces
-except :ref:`tunnel-interface`.
-
-The command is ``set interfaces $type $name address $address``. Examples:
-
-.. code-block:: none
-
-  set interfaces ethernet eth0 address 2001:db8:100::ffff/64
-  set interfaces tunnel tun0 address 2001:db8::1/64
-  set interfaces bridge br0 address  2001:db8:200::1/64
-  set interfaces ethernet eth0 vif 30 address 2001:db8:3::ffff/64
-
-DHCP
-****
-
-This method is supported on all physical interfaces, and those that are
-directly connected to a physical interface (Ethernet, VLAN, Bridge, Bond,
-Pseudo-ethernet, Wireless).
-
-The command is `set interfaces $type $name address dhcpv6`. Examples:
-
-.. code-block:: none
-
-  set interfaces bonding bond1 address dhcpv6
-  set interfaces bridge br0 vif 56 address dhcpv6
-
-Autoconfiguration (SLAAC)
-*************************
-
-SLAAC is specified in :rfc:`4862`. This method is supported on all physical
-interfaces, and those that are directly connected to a physical interface
-(Ethernet, VLAN, Bridge, Bond, Pseudo-ethernet, Wireless).
-
-The command is ``set interfaces $type $name ipv6 address autoconf``. Examples:
-
-.. code-block:: none
-
-  set interfaces ethernet eth0 vif 90 ipv6 address autoconf
-  set interfaces bridge br0 ipv6 address autoconf
-
-
-
-EUI-64
-******
-
-EUI-64 (64-Bit Extended Unique Identifier) as specified in :rfc:`4291`. IPv6
-addresses in /64 networks can be automatically generated from the prefix and
-MAC address, if you specify the prefix.
-
-The command is `set interfaces $type $name ipv6 address eui64 $prefix`.
-Examples:
-
-.. code-block:: none
-
-  set interfaces bridge br0 ipv6 address eui64 2001:db8:beef::/64
-  set interfaces pseudo-ethernet peth0 ipv6 address eui64 2001:db8:aa::/64
-
-
-Router Advertisements
-*********************
-
-Router advertisements are described in :rfc:`4861#section-4.6.2`. They are part
-of what is known as SLAAC (Stateless Address Autoconfiguration).
-
-To enable or disable, use:
-
-.. code-block:: none
-
-  set interfaces <interface> ipv6 router-advert send-advert <true|false>
-
-
-To set the options described in "Router Advertisement Message Format":
-
-.. code-block:: none
-
-  vyos@vyos#  set interfaces <interface> ipv6 router-advert
-  Possible completions:
-     cur-hop-limit         Value to be placed in the "Current Hop Limit" field in RAs
-     default-lifetime      Value to be placed in "Router Lifetime" field in RAs
-     default-preference    Default router preference
-     link-mtu              Value of link MTU to place in RAs
-     managed-flag          Value for "managed address configuration" flag in RAs
-     max-interval          Maximum interval between unsolicited multicast RAs
-     min-interval          Minimum interval between unsolicited multicast RAs
-  +  name-server           IPv6 address of a Recursive DNS Server
-     other-config-flag     Value to be placed in the "other configuration" flag in RAs
-  +> prefix                IPv6 prefix to be advertised in Router Advertisements (RAs)
-     reachable-time        Value to be placed in "Reachable Time" field in RAs
-     retrans-timer         Value to place in "Retrans Timer" field in RAs.
-     send-advert           Enable/disable sending RAs
-
-
-Prefix Information
-~~~~~~~~~~~~~~~~~~
-
-Prefix information is described in :rfc:`4861#section-4.6.2`.
-
-.. code-block:: none
-
-  vyos@vyos# set interfaces <interface> ipv6 router-advert prefix <h:h:h:h:h:h:h:h/x>
-  Possible completions:
-    autonomous-flag       Whether prefix can be used for address auto-configuration
-    on-link-flag          Flag that prefix can be used for on-link determination
-    preferred-lifetime    Time in seconds that the prefix will remain preferred
-    valid-lifetime        Time in seconds that the prefix will remain valid
-
-Receiving Router Advertisements
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-To receive and accept RAs on an interface, you need to enable it with the
-following configuration command
-
-.. code-block:: none
-
-  vyos@vyos# set system sysctl custom net.ipv6.conf.<interface>.accept_ra value 2
-