diff options
| author | Christian Poessinger <christian@poessinger.com> | 2019-11-28 21:41:32 +0100 |
|---|---|---|
| committer | Christian Poessinger <christian@poessinger.com> | 2019-11-28 21:41:32 +0100 |
| commit | 269023845a5dcd936d406fbe1edc2edd45262a24 (patch) | |
| tree | 52787b010fff5e7090f9e4c9c36554851d7b3259 /docs/interfaces/bridge.rst | |
| parent | 03eaf80e6fb39a3bf76ae996b0c12c041c11a6a3 (diff) | |
| download | vyos-documentation-269023845a5dcd936d406fbe1edc2edd45262a24.tar.gz vyos-documentation-269023845a5dcd936d406fbe1edc2edd45262a24.zip | |
Refactor "code-block:: console" to "code-block:: none"
Diffstat (limited to 'docs/interfaces/bridge.rst')
| -rw-r--r-- | docs/interfaces/bridge.rst | 16 |
1 files changed, 8 insertions, 8 deletions
diff --git a/docs/interfaces/bridge.rst b/docs/interfaces/bridge.rst index 77049597..2ae6a243 100644 --- a/docs/interfaces/bridge.rst +++ b/docs/interfaces/bridge.rst @@ -9,7 +9,7 @@ Layer-2 traffic. A bridge is created when a bridge interface is defined. In the example below we create a bridge named br100 with eth1 and eth2 as the bridge member ports. -.. code-block:: console +.. code-block:: none set interfaces bridge 'br100' set interfaces bridge br100 member interface eth1 @@ -18,7 +18,7 @@ we create a bridge named br100 with eth1 and eth2 as the bridge member ports. Each bridge member can be assiged a port cost and priority using the following commands: -.. code-block:: console +.. code-block:: none set interfaces bridge br100 member interface eth1 cost 10 set interfaces bridge br100 member interface eth1 priority 1024 @@ -27,14 +27,14 @@ Interfaces assigned to a bridge do not have address configuration. An IP address can be assigned to the bridge interface itself, however, like any normal interface. -.. code-block:: console +.. code-block:: none set interfaces bridge br100 address '192.168.100.1/24' set interfaces bridge br100 address '2001:db8:100::1/64' Example Result: -.. code-block:: console +.. code-block:: none bridge br100 { address 192.168.100.1/24 @@ -59,7 +59,7 @@ Spanning-Tree Protocol. STP is disabled by default. To enable spanning-tree use the `set interfaces bridge <name> stp` command: -.. code-block:: console +.. code-block:: none set interfaces bridge br100 stp @@ -70,7 +70,7 @@ using the `aging` directive. The `show bridge` operational command can be used to display configured bridges: -.. code-block:: console +.. code-block:: none vyos@vyos:~$ show bridge bridge name bridge id STP enabled interfaces @@ -79,7 +79,7 @@ bridges: If spanning-tree is enabled, the `show bridge <name> spanning-tree` command can be used to show STP configuration: -.. code-block:: console +.. code-block:: none vyos@vyos:~$ show bridge br100 spanning-tree br100 @@ -105,7 +105,7 @@ can be used to show STP configuration: The MAC address-table for a bridge can be displayed using the `show bridge <name> macs` command: -.. code-block:: console +.. code-block:: none vyos@vyos:~$ show bridge br100 macs port no mac addr is local? ageing timer |