interfaces: update base interface definitions and links

1 files changed, 0 insertions, 112 deletions

diff --git a/docs/interfaces/bridging.rst b/docs/interfaces/bridging.rst
deleted file mode 100644
index f31e30e6..00000000
--- a/docs/interfaces/bridging.rst
+++ /dev/null
@@ -1,112 +0,0 @@
-.. _bridge:
-
-Interface Bridge
-----------------
-
-Interfaces in VyOS can be bridged together to provide software switching of
-Layer-2 traffic.
-
-A bridge is created when a bridge interface is defined. In the example below
-we create a bridge named br100 with eth1 and eth2 as the bridge member ports.
-
-.. code-block:: sh
-
-  set interfaces bridge 'br100'
-  set interfaces bridge br100 member interface eth1
-  set interfaces bridge br100 member interface eth2
-
-Each bridge member can be assiged a port cost and priority using the following
-commands:
-
-.. code-block:: sh
-
-  set interfaces bridge br100 member interface eth1 cost 10
-  set interfaces bridge br100 member interface eth1 priority 1024
-
-Interfaces assigned to a bridge do not have address configuration. An IP
-address can be assigned to the bridge interface itself, however, like any
-normal interface.
-
-.. code-block:: sh
-
-  set interfaces bridge br100 address '192.168.100.1/24'
-  set interfaces bridge br100 address '2001:db8:100::1/64'
-
-Example Result:
-
-.. code-block:: sh
-
-  bridge br100 {
-      address 192.168.100.1/24
-      address 2001:db8:100::1/64
-      member {
-          interface eth1 {
-              cost 10
-              priority 1024
-          }
-          interface eth2 {
-          }
-      }
-
-  }
-  [...]
-
-In addition to normal IP interface configuration, bridge interfaces support
-Spanning-Tree Protocol. STP is disabled by default.
-
-.. note:: Please use caution when introducing spanning-tree protocol on a
-   network as it may result in topology changes.
-
-To enable spanning-tree use the `set interfaces bridge <name> stp` command:
-
-.. code-block:: sh
-
-  set interfaces bridge br100 stp
-
-STP `priority`, `forwarding-delay`, `hello-time`, and `max-age` can be
-configured for the bridge. The MAC aging time can also be configured
-using the `aging` directive.
-
-The `show bridge` operational command can be used to display configured
-bridges:
-
-.. code-block:: sh
-
-  vyos@vyos:~$ show bridge
-  bridge name     bridge id               STP enabled     interfaces
-  br100           0000.000c29443b19       yes             eth1.100
-
-If spanning-tree is enabled, the `show bridge <name> spanning-tree` command
-can be used to show STP configuration:
-
-.. code-block:: sh
-
-  vyos@vyos:~$ show bridge br100 spanning-tree
-  br100
-   bridge id              0000.000c29443b19
-   designated root        0000.000c29443b19
-   root port                 0                    path cost                  0
-   max age                  20.00                 bridge max age            20.00
-   hello time                2.00                 bridge hello time          2.00
-   forward delay            15.00                 bridge forward delay      15.00
-   ageing time             300.00
-   hello timer               0.47                 tcn timer                  0.00
-   topology change timer     0.00                 gc timer                  64.63
-   flags
-
-  eth1.100 (1)
-   port id                8001                    state                forwarding
-   designated root        0000.000c29443b19       path cost                  4
-   designated bridge      0000.000c29443b19       message age timer          0.00
-   designated port        8001                    forward delay timer        0.00
-   designated cost           0                    hold timer                 0.00
-   flags
-
-The MAC address-table for a bridge can be displayed using the
-`show bridge <name> macs` command:
-
-.. code-block:: sh
-
-  vyos@vyos:~$ show bridge br100 macs
-  port no mac addr                is local?       ageing timer
-    1     00:0c:29:44:3b:19       yes                0.00