arrange: interfaces

1 files changed, 0 insertions, 226 deletions

diff --git a/docs/interfaces/ethernet.rst b/docs/interfaces/ethernet.rst
deleted file mode 100644
index f2ab3f67..00000000
--- a/docs/interfaces/ethernet.rst
+++ /dev/null
@@ -1,226 +0,0 @@
-.. _ethernet-interface:
-
-########
-Ethernet
-########
-
-This will be the most widely used interface on a router carrying traffic to the
-real world.
-
-*************
-Configuration
-*************
-
-Common interface configuration
-==============================
-
-.. cmdinclude:: ../_include/interface-common-with-dhcp.txt
-   :var0: ethernet
-   :var1: eth0
-
-Ethernet options
-================
-
-.. cfgcmd:: set interfaces ethernet <interface> duplex <auto | full | half>
-
-   Configure physical interface duplex setting.
-
-   * auto - interface duplex setting is auto-negotiated
-   * full - always use full-duplex
-   * half - always use half-duplex
-
-   VyOS default will be `auto`.
-
-.. cfgcmd:: set interfaces ethernet <interface> speed <auto | 10 | 100 | 1000 |
-  2500 | 5000 | 10000 | 25000 | 40000 | 50000 | 100000>
-
-   Configure physical interface speed setting.
-
-   * auto - interface speed is auto-negotiated
-   * 10 - 10 MBit/s
-   * 100 - 100 MBit/s
-   * 1000 - 1 GBit/s
-   * 2500 - 2.5 GBit/s
-   * 5000 - 5 GBit/s
-   * 10000 - 10 GBit/s
-   * 25000 - 25 GBit/s
-   * 40000 - 40 GBit/s
-   * 50000 - 50 GBit/s
-   * 100000 - 100 GBit/s
-
-   VyOS default will be `auto`.
-
-
-.. cfgcmd:: set interfaces ethernet <interface> mirror <interface>
-
-  Use this command to mirror the inbound traffic from one Ethernet interface to
-  another interface. This feature is typically used to provide a copy of traffic
-  inbound on one interface to a system running a monitoring or IPS application
-  on another interface. The benefit of mirroring the traffic is that the
-  application is isolated from the source traffic and so application processing
-  does not affect the traffic or the system performance.
-
-  Example:
-
-  .. code-block:: none
-
-    set interfaces ethernet eth0 mirror eth1
-
-VLAN
-====
-
-Regular VLANs (802.1q)
-----------------------
-
-.. cmdinclude:: ../_include/interface-vlan-8021q.txt
-   :var0: ethernet
-   :var1: eth0
-
-QinQ (802.1ad)
---------------
-
-.. cmdinclude:: ../_include/interface-vlan-8021ad.txt
-   :var0: ethernet
-   :var1: eth0
-
-*********
-Operation
-*********
-
-.. opcmd:: show interfaces ethernet
-
-   Show brief interface information.
-
-   .. code-block:: none
-
-     vyos@vyos:~$ show interfaces ethernet
-     Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down
-     Interface        IP Address                        S/L  Description
-     ---------        ----------                        ---  -----------
-     eth0             172.18.201.10/24                  u/u  LAN
-     eth1             172.18.202.11/24                  u/u  WAN
-     eth2             -                                 u/D
-
-.. opcmd:: show interfaces ethernet <interface>
-
-   Show detailed information on given `<interface>`
-
-   .. code-block:: none
-
-     vyos@vyos:~$ show interfaces ethernet eth0
-     eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
-         link/ether 00:50:44:00:f5:c9 brd ff:ff:ff:ff:ff:ff
-         inet6 fe80::250:44ff:fe00:f5c9/64 scope link
-            valid_lft forever preferred_lft forever
-
-         RX:  bytes    packets     errors    dropped    overrun      mcast
-           56735451     179841          0          0          0     142380
-         TX:  bytes    packets     errors    dropped    carrier collisions
-            5601460      62595          0          0          0          0
-
-.. opcmd:: show interfaces ethernet <interface> physical
-
-   Show information about physical `<interface>`
-
-   .. code-block:: none
-
-     vyos@vyos:~$ show interfaces ethernet eth0 physical
-     Settings for eth0:
-             Supported ports: [ TP ]
-             Supported link modes:   1000baseT/Full
-                                     10000baseT/Full
-             Supported pause frame use: No
-             Supports auto-negotiation: No
-             Supported FEC modes: Not reported
-             Advertised link modes:  Not reported
-             Advertised pause frame use: No
-             Advertised auto-negotiation: No
-             Advertised FEC modes: Not reported
-             Speed: 10000Mb/s
-             Duplex: Full
-             Port: Twisted Pair
-             PHYAD: 0
-             Transceiver: internal
-             Auto-negotiation: off
-             MDI-X: Unknown
-             Supports Wake-on: uag
-             Wake-on: d
-             Link detected: yes
-     driver: vmxnet3
-     version: 1.4.16.0-k-NAPI
-     firmware-version:
-     expansion-rom-version:
-     bus-info: 0000:0b:00.0
-     supports-statistics: yes
-     supports-test: no
-     supports-eeprom-access: no
-     supports-register-dump: yes
-     supports-priv-flags: no
-
-.. opcmd:: show interfaces ethernet <interface> physical offload
-
-   Show available offloading functions on given `<interface>`
-
-   .. code-block:: none
-
-     vyos@vyos:~$ show interfaces ethernet eth0 physical offload
-     rx-checksumming               on
-     tx-checksumming               on
-     tx-checksum-ip-generic        on
-     scatter-gather                off
-     tx-scatter-gather             off
-     tcp-segmentation-offload      off
-     tx-tcp-segmentation           off
-     tx-tcp-mangleid-segmentation  off
-     tx-tcp6-segmentation          off
-     udp-fragmentation-offload     off
-     generic-segmentation-offload  off
-     generic-receive-offload       off
-     large-receive-offload         off
-     rx-vlan-offload               on
-     tx-vlan-offload               on
-     ntuple-filters                off
-     receive-hashing               on
-     tx-gre-segmentation           on
-     tx-gre-csum-segmentation      on
-     tx-udp_tnl-segmentation       on
-     tx-udp_tnl-csum-segmentation  on
-     tx-gso-partial                on
-     tx-nocache-copy               off
-     rx-all                        off
-
-.. opcmd:: show interfaces ethernet <interface> transceiver
-
-   Show transceiver information from plugin modules, e.g SFP+, QSFP
-
-   .. code-block:: none
-
-     vyos@vyos:~$ show interfaces ethernet eth5 transceiver
-        Identifier              : 0x03 (SFP)
-        Extended identifier     : 0x04 (GBIC/SFP defined by 2-wire interface ID)
-        Connector               : 0x07 (LC)
-        Transceiver codes       : 0x00 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00
-        Transceiver type        : Ethernet: 1000BASE-SX
-        Encoding                : 0x01 (8B/10B)
-        BR, Nominal             : 1300MBd
-        Rate identifier         : 0x00 (unspecified)
-        Length (SMF,km)         : 0km
-        Length (SMF)            : 0m
-        Length (50um)           : 550m
-        Length (62.5um)         : 270m
-        Length (Copper)         : 0m
-        Length (OM3)            : 0m
-        Laser wavelength        : 850nm
-        Vendor name             : CISCO-FINISAR
-        Vendor OUI              : 00:90:65
-        Vendor PN               : FTRJ-8519-7D-CS4
-        Vendor rev              : A
-        Option values           : 0x00 0x1a
-        Option                  : RX_LOS implemented
-        Option                  : TX_FAULT implemented
-        Option                  : TX_DISABLE implemented
-        BR margin, max          : 0%
-        BR margin, min          : 0%
-        Vendor SN               : FNS092xxxxx
-        Date code               : 0506xx
-