Split network-interfaces into multiple files

- Now sections as separate files under interfaces/
- Fixed some references

1 files changed, 47 insertions, 0 deletions

diff --git a/docs/interfaces/vlan.rst b/docs/interfaces/vlan.rst
new file mode 100644
index 00000000..76fadd3c
--- /dev/null
+++ b/docs/interfaces/vlan.rst
@@ -0,0 +1,47 @@
+VLAN Sub-Interfaces (802.1Q)
+----------------------------
+.. _interfaces-vlan:
+
+802.1Q VLAN interfaces are represented as virtual sub-interfaces in VyOS. The
+term used for this is `vif`. Configuration of a tagged sub-interface is
+accomplished using the configuration command
+`set interfaces ethernet <name> vif <vlan-id>`.
+
+.. code-block:: sh
+
+  set interfaces ethernet eth1 vif 100 description 'VLAN 100'
+  set interfaces ethernet eth1 vif 100 address '192.168.100.1/24'
+  set interfaces ethernet eth1 vif 100 address '2001:db8:100::1/64'
+
+Resulting in:
+
+.. code-block:: sh
+
+  ethernet eth1 {
+      address 192.168.100.1/24
+      address 2001:db8:100::1/64
+      description INSIDE
+      duplex auto
+      hw-id 00:0c:29:44:3b:19
+      smp_affinity auto
+      speed auto
+      vif 100 {
+          address 192.168.100.1/24
+          description "VLAN 100"
+      }
+  }
+
+VLAN interfaces are shown as `<name>.<vlan-id>`, e.g. `eth1.100`:
+
+.. code-block:: sh
+
+  vyos@vyos:~$ show interfaces
+  Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down
+  Interface        IP Address                        S/L  Description
+  ---------        ----------                        ---  -----------
+  eth0             172.16.51.129/24                  u/u  OUTSIDE
+  eth1             192.168.0.1/24                    u/u  INSIDE
+  eth1.100         192.168.100.1/24                  u/u  VLAN 100
+  lo               127.0.0.1/8                       u/u
+                   ::1/128
+