Merge pull request #157 from rebortg/addresspace

Addresspace

6 files changed, 16 insertions, 16 deletions

diff --git a/docs/interfaces/addresses.rst b/docs/interfaces/addresses.rst
index 19ba8225..034fb0ef 100644
--- a/docs/interfaces/addresses.rst
+++ b/docs/interfaces/addresses.rst
@@ -32,7 +32,7 @@ The command is ``set interfaces $type $name address $address``. Examples:
   set interfaces ethernet eth0 address 192.0.2.1/24
   set interfaces tunnel tun0 address 10.0.0.1/30
   set interfaces bridge br0 address 203.0.113.45/26
-  set interfaces ethernet eth0 vif 30 address 192.0.30.254/24
+  set interfaces ethernet eth0 vif 30 address 198.51.100.254/24
 
 DHCP
 ****
diff --git a/docs/interfaces/bridge.rst b/docs/interfaces/bridge.rst
index 2ae6a243..a7bbbca6 100644
--- a/docs/interfaces/bridge.rst
+++ b/docs/interfaces/bridge.rst
@@ -109,4 +109,4 @@ The MAC address-table for a bridge can be displayed using the
 
   vyos@vyos:~$ show bridge br100 macs
   port no mac addr                is local?       ageing timer
-    1     00:0c:29:44:3b:19       yes                0.00
+    1     00:53:29:44:3b:19       yes                0.00
diff --git a/docs/interfaces/ethernet.rst b/docs/interfaces/ethernet.rst
index cbefbaf6..a8cee8c2 100644
--- a/docs/interfaces/ethernet.rst
+++ b/docs/interfaces/ethernet.rst
@@ -23,7 +23,7 @@ Resulting in:
       address 2001:db8:1::ffff/64
       description INSIDE
       duplex auto
-      hw-id 00:0c:29:44:3b:19
+      hw-id 00:53:29:44:3b:19
       smp_affinity auto
       speed auto
   }
diff --git a/docs/interfaces/index.rst b/docs/interfaces/index.rst
index adcc7c71..0513adf1 100644
--- a/docs/interfaces/index.rst
+++ b/docs/interfaces/index.rst
@@ -25,7 +25,7 @@ command.
 
   vyos@vyos:~$ show interfaces ethernet eth0
   eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
-      link/ether 00:0c:29:44:3b:0f brd ff:ff:ff:ff:ff:ff
+      link/ether 00:53:29:44:3b:0f brd ff:ff:ff:ff:ff:ff
       inet 172.16.51.129/24 brd 172.16.51.255 scope global eth0
       inet6 fe80::20c:29ff:fe44:3b0f/64 scope link
          valid_lft forever preferred_lft forever
diff --git a/docs/interfaces/vlan.rst b/docs/interfaces/vlan.rst
index 82f73efe..55656d5d 100644
--- a/docs/interfaces/vlan.rst
+++ b/docs/interfaces/vlan.rst
@@ -45,7 +45,7 @@ Resulting in:
       address 2001:db8:100::1/64
       description INSIDE
       duplex auto
-      hw-id 00:0c:29:44:3b:19
+      hw-id 00:53:29:44:3b:19
       smp_affinity auto
       speed auto
       vif 100 {
diff --git a/docs/interfaces/wireless.rst b/docs/interfaces/wireless.rst
index 8bd84364..9e3c6cf5 100644
--- a/docs/interfaces/wireless.rst
+++ b/docs/interfaces/wireless.rst
@@ -39,7 +39,7 @@ to as :abbr:`SSID (Service Set Identifier)`, and MAC addresses.
 
 The WAP in this example has the following characteristics:
 
-* IP address ``192.0.2.1/24``
+* IP address ``192.168.2.1/24``
 * Network ID (SSID) ``TEST``
 * WPA passphrase ``12345678``
 * Use 802.11n protocol
@@ -47,7 +47,7 @@ The WAP in this example has the following characteristics:
 
 .. code-block:: none
 
-  set interfaces wireless wlan0 address '192.0.2.1/24'
+  set interfaces wireless wlan0 address '192.168.2.1/24'
   set interfaces wireless wlan0 type access-point
   set interfaces wireless wlan0 channel 1
   set interfaces wireless wlan0 mode n
@@ -63,7 +63,7 @@ Resulting in
   interfaces {
     [...]
     wireless wlan0 {
-          address 192.0.2.1/24
+          address 192.168.2.1/24
           channel 1
           mode n
           security {
@@ -103,24 +103,24 @@ is responsible for authenticating the users.
 
 The WAP in this example has the following characteristics:
 
-* IP address ``192.0.2.1/24``
+* IP address ``192.168.2.1/24``
 * Network ID (SSID) ``Enterprise-TEST``
 * WPA passphrase ``12345678``
 * Use 802.11n protocol
 * Wireless channel ``1``
-* RADIUS server at ``192.0.3.10`` with shared-secret ``VyOSPassword``
+* RADIUS server at ``192.168.3.10`` with shared-secret ``VyOSPassword``
 
 .. code-block:: none
 
-  set interfaces wireless wlan0 address '192.0.2.1/24'
+  set interfaces wireless wlan0 address '192.168.2.1/24'
   set interfaces wireless wlan0 type access-point
   set interfaces wireless wlan0 channel 1
   set interfaces wireless wlan0 mode n
   set interfaces wireless wlan0 ssid 'TEST'
   set interfaces wireless wlan0 security wpa mode wpa2
   set interfaces wireless wlan0 security wpa cipher CCMP
-  set interfaces wireless wlan0 security wpa radius server 192.0.3.10 key 'VyOSPassword'
-  set interfaces wireless wlan0 security wpa radius server 192.0.3.10 port 1812
+  set interfaces wireless wlan0 security wpa radius server 192.168.3.10 key 'VyOSPassword'
+  set interfaces wireless wlan0 security wpa radius server 192.168.3.10 port 1812
 
 Resulting in
 
@@ -129,7 +129,7 @@ Resulting in
   interfaces {
     [...]
     wireless wlan0 {
-          address 192.0.2.1/24
+          address 192.168.2.1/24
           channel 1
           mode n
           security {
@@ -137,7 +137,7 @@ Resulting in
                   cipher CCMP
                   mode wpa2
                   radius {
-                      server 192.0.3.10 {
+                      server 192.168.3.10 {
                           key 'VyOSPassword'
                           port 1812
                       }
@@ -263,7 +263,7 @@ The wireless interface identifier can range from wlan0 to wlan999.
   Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down
   Interface        IP Address                        S/L  Description
   ---------        ----------                        ---  -----------
-  wlan0            192.0.2.254/24                    u/u
+  wlan0            192.168.2.254/24                    u/u
 
 
 .. opcmd:: show interfaces wireless <wlanX> queue