diff options
author | Christian Poessinger <christian@poessinger.com> | 2019-12-29 09:08:49 +0100 |
---|---|---|
committer | Christian Poessinger <christian@poessinger.com> | 2019-12-29 09:08:49 +0100 |
commit | b61205ca9d5954385e5de5dbfa27446974c0ac7d (patch) | |
tree | 6913f1c47be502b1b376283cad52d54eea31a0ff /docs/quick-start.rst | |
parent | a2e9f5d2030c59908beb3075c53b383d2e454d62 (diff) | |
download | vyos-documentation-b61205ca9d5954385e5de5dbfa27446974c0ac7d.tar.gz vyos-documentation-b61205ca9d5954385e5de5dbfa27446974c0ac7d.zip |
quick-start: rework headlines
Diffstat (limited to 'docs/quick-start.rst')
-rw-r--r-- | docs/quick-start.rst | 16 |
1 files changed, 10 insertions, 6 deletions
diff --git a/docs/quick-start.rst b/docs/quick-start.rst index b1295790..253f093e 100644 --- a/docs/quick-start.rst +++ b/docs/quick-start.rst @@ -34,8 +34,8 @@ Once your configuration works as expected you can save it permanently. save -Network Interface Configuration -############################### +Interface Configuration +####################### * Your outside/WAN interface will be `eth0`, it receives it's interface address be means of DHCP. @@ -52,7 +52,8 @@ commands: set interfaces ethernet eth1 address '192.168.0.1/24' set interfaces ethernet eth1 description 'INSIDE' -Enable Management via SSH + +Enable SSH Management SSH ######################### After switching to :ref:`quick-start-configuration-mode` issue the following @@ -65,8 +66,8 @@ on specific addresses only. set service ssh port '22' -Configure DHCP and DNS server -############################# +Configure DHCP/DNS Servers +########################## * Provide DHCP service on your internal/LAN network where VyOS will act as the default gateway and DNS server. @@ -90,6 +91,7 @@ Configure DHCP and DNS server set service dns forwarding listen-address '192.168.0.1' set service dns forwarding allow-from '192.168.0.0/24' + NAT ### @@ -101,6 +103,7 @@ NAT set nat source rule 100 source address '192.168.0.0/24' set nat source rule 100 translation address masquerade + Firewall ######## @@ -163,10 +166,10 @@ Commit changes, save the configuration, and exit configuration mode: vyos@vyos# exit vyos@vyos$ + QoS ### - One common use of :ref:`qos` is to limit bandwidth for an interface. In the example below we limit bandwidth for our internal/LAN connection to 200 Mbit/s download and our outside/WAN connection to 50 Mbit/s upload: @@ -191,6 +194,7 @@ interface-level traffic-policy directive: set interfaces ethernet eth0 traffic-policy out 'WAN-OUT' set interfaces ethernet eth1 traffic-policy out 'LAN-OUT' + Security Hardening ################## |