mss-clamping: remove unnecessary disable commnad, add directives and explanations

1 files changed, 34 insertions, 11 deletions

diff --git a/docs/routing/mss-clamp.rst b/docs/routing/mss-clamp.rst
index 986c5062..a4edf1c6 100644
--- a/docs/routing/mss-clamp.rst
+++ b/docs/routing/mss-clamp.rst
@@ -3,20 +3,34 @@
 TCP-MSS Clamping
 ----------------
 
-As Internet wide PMTU discovery rarely works we sometimes need to clamp our TCP
-MSS value to a specific value. Starting with VyOS 1.2 there is a firewall option
-to clamp your TCP MSS value for IPv4 and IPv6.
+As Internet wide PMTU discovery rarely works, we sometimes need to clamp
+our TCP MSS value to a specific value. This is a field in the TCP
+Options part of a SYN packet. By setting the MSS value, you are telling
+the remote side unequivocally 'do not try to send me packets bigger than
+this value'.
 
-Clamping can be disabled per interface using the `disable` keyword:
+Starting with VyOS 1.2 there is a firewall option to clamp your TCP MSS
+value for IPv4 and IPv6.
 
-.. code-block:: none
 
-  set firewall options interface pppoe0 disable
+.. note:: MSS value = MTU - 20 (IP header) - 20 (TCP header), resulting
+   in 1452 bytes on a 1492 byte MTU.
+
 
 IPv4
 ^^^^
 
-Clamp outgoing MSS value in a TCP SYN packet to `1452` for `pppoe0` and `1372`
+.. cfgcmd:: set firewall options interface <interface> adjust-mss <number-of-bytes>
+
+   Use this command to set the maximum segment size for IPv4 transit
+   packets on a specific interface (500-1460 bytes).
+
+
+Example
+"""""""
+
+Clamp outgoing MSS value in a TCP SYN packet to `1452` for `pppoe0` and
+`1372`
 for your WireGuard `wg02` tunnel.
 
 .. code-block:: none
@@ -27,15 +41,24 @@ for your WireGuard `wg02` tunnel.
 IPv6
 ^^^^^
 
+.. cfgcmd:: set firewall options interface <interface> adjust-mss6 <number-of-bytes>
+
+   Use this command to set the maximum segment size for IPv6 transit
+   packets on a specific interface (1280-1492 bytes).
+
+
+Example
+"""""""
+
 Clamp outgoing MSS value in a TCP SYN packet to `1280` for both `pppoe0` and
 `wg02` interface.
 
-To achieve the same for IPv6 please use:
-
 .. code-block:: none
 
   set firewall options interface pppoe0 adjust-mss6 '1280'
   set firewall options interface wg02 adjust-mss6 '1280'
 
-.. note:: MSS value = MTU - 20 (IP header) - 20 (TCP header), resulting in 1452
-          bytes on a 1492 byte MTU.
+
+
+.. hint:: When doing your byte calculations, you might find useful this
+   `Visual packet size calculator <https://baturin.org/tools/encapcalc/>`_.