services in own folder

* spitting services into multiple files in it's own folder
* making image links absolute
* some linting

1 files changed, 178 insertions, 0 deletions

diff --git a/docs/services/conntrack.rst b/docs/services/conntrack.rst
new file mode 100644
index 00000000..27db622d
--- /dev/null
+++ b/docs/services/conntrack.rst
@@ -0,0 +1,178 @@
+Conntrack
+---------
+
+One of the important features built on top of the Netfilter framework is
+connection tracking. Connection tracking allows the kernel to keep track of all
+logical network connections or sessions, and thereby relate all of the packets
+which may make up that connection. NAT relies on this information to translate
+all related packets in the same way, and iptables can use this information to
+act as a stateful firewall.
+
+The connection state however is completely independent of any upper-level
+state, such as TCP's or SCTP's state. Part of the reason for this is that when
+merely forwarding packets, i.e. no local delivery, the TCP engine may not
+necessarily be invoked at all. Even connectionless-mode transmissions such as
+UDP, IPsec (AH/ESP), GRE and other tunneling protocols have, at least, a pseudo
+connection state. The heuristic for such protocols is often based upon a preset
+timeout value for inactivity, after whose expiration a Netfilter connection is
+dropped.
+
+Each Netfilter connection is uniquely identified by a (layer-3 protocol, source
+address, destination address, layer-4 protocol, layer-4 key) tuple. The layer-4
+key depends on the transport protocol; for TCP/UDP it is the port numbers, for
+tunnels it can be their tunnel ID, but otherwise is just zero, as if it were
+not part of the tuple. To be able to inspect the TCP port in all cases, packets
+will be mandatorily defragmented.
+
+Configuration
+^^^^^^^^^^^^^
+
+.. code-block:: sh
+
+  # Protocols only for which local conntrack entries will be synced (tcp, udp, icmp, sctp)
+  set service conntrack-sync accept-protocol
+
+  # Queue size for listening to local conntrack events (in MB)
+  set service conntrack-sync event-listen-queue-size <int>
+
+  # Protocol for which expect entries need to be synchronized. (all, ftp, h323, nfs, sip, sqlnet)
+  set service conntrack-sync expect-sync
+
+  # Failover mechanism to use for conntrack-sync [REQUIRED]
+  set service conntrack-sync failover-mechanism
+
+  set service conntrack-sync cluster group <string>
+  set service conntrack-sync vrrp sync-group <1-255>
+
+  # IP addresses for which local conntrack entries will not be synced
+  set service conntrack-sync ignore-address ipv4 <x.x.x.x>
+
+  # Interface to use for syncing conntrack entries [REQUIRED]
+  set service conntrack-sync interface <ifname>
+
+  # Multicast group to use for syncing conntrack entries
+  set service conntrack-sync mcast-group <x.x.x.x>
+
+  # Queue size for syncing conntrack entries (in MB)
+  set service conntrack-sync sync-queue-size <size>
+
+Example
+^^^^^^^
+The next exemple is a simple configuration of conntrack-sync.
+
+
+.. figure:: /_static/images/service_conntrack_sync-schema.png
+   :scale: 60 %
+   :alt: Conntrack Sync Example
+
+   Conntrack Sync Example
+
+First of all, make sure conntrack is enabled by running
+
+.. code-block:: sh
+
+  show conntrack table ipv4
+
+If the table is empty and you have a warning message, it means conntrack is not
+enabled. To enable conntrack, just create a NAT or a firewall rule.
+
+.. code-block:: sh
+
+  set firewall state-policy established action accept
+
+You now should have a conntrack table
+
+.. code-block:: sh
+
+  $ show conntrack table ipv4
+  TCP state codes: SS - SYN SENT, SR - SYN RECEIVED, ES - ESTABLISHED,
+                   FW - FIN WAIT, CW - CLOSE WAIT, LA - LAST ACK,
+                   TW - TIME WAIT, CL - CLOSE, LI - LISTEN
+
+  CONN ID    Source                 Destination            Protocol         TIMEOUT
+  1015736576 10.35.100.87:58172     172.31.20.12:22        tcp [6] ES       430279
+  1006235648 10.35.101.221:57483    172.31.120.21:22       tcp [6] ES       413310
+  1006237088 10.100.68.100          172.31.120.21          icmp [1]         29
+  1015734848 10.35.100.87:56282     172.31.20.12:22        tcp [6] ES       300
+  1015734272 172.31.20.12:60286     239.10.10.14:694       udp [17]         29
+  1006239392 10.35.101.221          172.31.120.21          icmp [1]         29
+
+Now configure conntrack-sync service on ``router1`` **and** ``router2``
+
+.. code-block:: sh
+
+  set service conntrack-sync accept-protocol 'tcp,udp,icmp'
+  set service conntrack-sync event-listen-queue-size '8'
+  set service conntrack-sync failover-mechanism cluster group 'GROUP' # Or VRRP
+  set service conntrack-sync interface 'eth0'
+  set service conntrack-sync mcast-group '225.0.0.50'
+  set service conntrack-sync sync-queue-size '8'
+
+On the active router, you should have informations in the internal-cache of
+conntrack-sync. The same current active connections number should be shown in
+the external-cache of the standby router
+
+On active router run:
+
+
+.. code-block:: sh
+
+  $ show conntrack-sync statistics
+
+  Main Table Statistics:
+
+  cache internal:
+  current active connections:               10
+  connections created:                    8517    failed:            0
+  connections updated:                     127    failed:            0
+  connections destroyed:                  8507    failed:            0
+
+  cache external:
+  current active connections:                0
+  connections created:                       0    failed:            0
+  connections updated:                       0    failed:            0
+  connections destroyed:                     0    failed:            0
+
+  traffic processed:
+                     0 Bytes                         0 Pckts
+
+  multicast traffic (active device=eth0):
+                868780 Bytes sent               224136 Bytes recv
+                 20595 Pckts sent                14034 Pckts recv
+                     0 Error send                    0 Error recv
+
+  message tracking:
+                     0 Malformed msgs                    0 Lost msgs
+
+
+
+  On standby router run:
+
+
+  $ show conntrack-sync statistics
+
+  Main Table Statistics:
+
+  cache internal:
+  current active connections:                0
+  connections created:                       0    failed:            0
+  connections updated:                       0    failed:            0
+  connections destroyed:                     0    failed:            0
+
+  cache external:
+  current active connections:               10
+  connections created:                     888    failed:            0
+  connections updated:                     134    failed:            0
+  connections destroyed:                   878    failed:            0
+
+  traffic processed:
+                     0 Bytes                         0 Pckts
+
+  multicast traffic (active device=eth0):
+                234184 Bytes sent               907504 Bytes recv
+                 14663 Pckts sent                21495 Pckts recv
+                     0 Error send                    0 Error recv
+
+  message tracking:
+                     0 Malformed msgs                    0 Lost msgs
+