arrange services and protocols

1 files changed, 0 insertions, 107 deletions

diff --git a/docs/services/console-server.rst b/docs/services/console-server.rst
deleted file mode 100644
index cf222544..00000000
--- a/docs/services/console-server.rst
+++ /dev/null
@@ -1,107 +0,0 @@
-.. _console_server:
-
-##############
-Console Server
-##############
-
-Starting of with VyOS 1.3 (equuleus) we added support for running VyOS as an
-Out-of-Band Management device which provides remote access by means of SSH to
-directly attached serial interfaces.
-
-Serial interfaces can be any interface which is directly connected to the CPU
-or chipset (mostly known as a ttyS interface in Linux) or any other USB to
-serial converter (Prolific PL2303 or FTDI FT232/FT4232 based chips).
-
-If you happened to use a Cisco NM-16A - Sixteen Port Async Network Module or
-NM-32A - Thirty-two Port Async Network Module - this is your VyOS replacement.
-
-For USB port information please refor to: :ref:`hardware_usb`.
-
-Configuration
-=============
-
-Between computers, the most common configuration used was "8N1": eight bit
-characters, with one start bit, one stop bit, and no parity bit. Thus 10 Baud
-times are used to send a single character, and so dividing the signalling
-bit-rate by ten results in the overall transmission speed in characters per
-second. This is also the default setting if none of those options are defined.
-
-.. cfgcmd:: set service console-server <device> data-bits [7 | 8]
-
-  Configure either seven or eight data bits. This defaults to eight data
-  bits if left unconfigured.
-
-.. cfgcmd:: set service console-server <device> description <string>
-
-  A user friendly description identifying the connected peripheral.
-
-.. cfgcmd:: set service console-server <device> parity [even | odd | none]
-
-  Set the parity option for the console. If unset this will default to none.
-
-.. cfgcmd:: set service console-server <device> stop-bits [1 | 2]
-
-  Configure either one or two stop bits. This defaults to one stop bits if
-  left unconfigured.
-
-.. cfgcmd:: set service console-server <device> speed [ 300 | 1200 | 2400 | 4800 | 9600 | 19200 | 38400 | 57600 | 115200 ]
-
-  .. note:: USB to serial converters will handle most of their work in software
-     so you should be carefull with the selected baudrate as some times they
-     can't cope with the expected speed.
-
-Remote Access
--------------
-
-Each individual configured console-server device can be directly exposed to
-the outside world. A user can directly connect via SSH to the configured
-port.
-
-.. cfgcmd:: set service console-server <device> ssh port <port>
-
-  Accept SSH connections for the given `<device>` on TCP port `<port>`.
-  After successfull authentication the user will be directly dropped to
-  the connected serial device.
-
-  .. hint:: Multiple users can connect to the same serial device but only
-     one is allowed to write to the console port.
-
-Operation
-=========
-
-.. opcmd:: show console-server ports
-
-  Show configured serial ports and their respective interface configuration.
-
-  .. code-block:: none
-
-    vyos@vyos:~$ show console-server ports
-     usb0b2.4p1.0             on /dev/serial/by-bus/usb0b2.4p1.0@ at   9600n
-
-.. opcmd:: show console-server user
-
-  Show currently connected users.
-
-  .. code-block:: none
-
-    vyos@vyos:~$ show console-server user
-     usb0b2.4p1.0               up   vyos@localhost
-
-
-.. opcmd:: connect console-server <device>
-
-  Locally connect to serial port identified by `<device>`.
-
-  .. code-block:: none
-
-    vyos@vyos-r1:~$ connect console-server usb0b2.4p1.0
-    [Enter `^Ec?' for help]
-    [-- MOTD -- VyOS Console Server]
-
-    vyos-r2 login:
-
-  .. hint:: Multiple users can connect to the same serial device but only
-     one is allowed to write to the console port.
-
-  .. hint:: The sequence ``^Ec?`` translates to: ``Ctrl+E c ?``. To quit
-     the session use: ``Ctrl+E c .``