diff options
| author | Christian Poessinger <christian@poessinger.com> | 2019-11-27 17:20:36 +0100 |
|---|---|---|
| committer | Christian Poessinger <christian@poessinger.com> | 2019-11-27 17:20:38 +0100 |
| commit | 6aa3cbb611f74bdf8e44d5527f5138f3122a7497 (patch) | |
| tree | 009a1fe9447bdd980d5017d49f102e7ccdace03b /docs/services/ipoe-server.rst | |
| parent | 76bbe2744d7184ee50626d9d7b65f21dad1c7e99 (diff) | |
| download | vyos-documentation-6aa3cbb611f74bdf8e44d5527f5138f3122a7497.tar.gz vyos-documentation-6aa3cbb611f74bdf8e44d5527f5138f3122a7497.zip | |
Refactor "code-block:: sh" to "code-block:: console"
This will add proper new-lines into the rendered PDF. Before if it has
been a long line, not all content was preserved in the PDF.
Diffstat (limited to 'docs/services/ipoe-server.rst')
| -rw-r--r-- | docs/services/ipoe-server.rst | 16 |
1 files changed, 8 insertions, 8 deletions
diff --git a/docs/services/ipoe-server.rst b/docs/services/ipoe-server.rst index 925ef373..1e5e72dc 100644 --- a/docs/services/ipoe-server.rst +++ b/docs/services/ipoe-server.rst @@ -17,7 +17,7 @@ The clients mac address and the incoming interface is being used as control para The example configuration below will assign an IP to the client on the incoming interface eth2 with the client mac address 08:00:27:2f:d8:06. Other DHCP discovery requests will be ignored, unless the client mac has been enabled in the configuration. -.. code-block:: sh +.. code-block:: console set service ipoe-server authentication interface eth2 mac-address 08:00:27:2f:d8:06 set service ipoe-server authentication mode 'local' @@ -29,7 +29,7 @@ Other DHCP discovery requests will be ignored, unless the client mac has been en The first address of the parameter ``client-subnet``, will be used as the default gateway. Connected sessions can be checked via the ``show ipoe-server sessions`` command. -.. code-block:: sh +.. code-block:: console vyos@vyos:~$ show ipoe-server sessions @@ -46,7 +46,7 @@ for devices routed via the clients cpe. IPv6 DNS addresses are optional. -.. code-block:: sh +.. code-block:: console set service ipoe-server authentication interface eth3 mac-address 08:00:27:2F:D8:06 set service ipoe-server authentication mode 'local' @@ -57,7 +57,7 @@ IPv6 DNS addresses are optional. set service ipoe-server dnsv6-server server-3 '2001:db8:bbb::' set service ipoe-server interface eth3 client-subnet '192.168.1.0/24' -.. code-block:: sh +.. code-block:: console vyos@ipoe-server# run sh ipoe-server sessions ifname | called-sid | calling-sid | ip | ip6 | ip6-dp | rate-limit | state | uptime | sid @@ -74,7 +74,7 @@ Automatic VLAN creation To create VLANs per user during runtime, the following settings are required on a per interface basis. VLAN ID and VLAN range can be present in the configuration at the same time. -.. code-block:: sh +.. code-block:: console set service ipoe-server interface eth2 network vlan set service ipoe-server interface eth2 vlan-id 100 @@ -88,7 +88,7 @@ RADIUS Setup To use a RADIUS server for authentication and bandwidth-shaping, the following example configuration can be used. -.. code-block:: sh +.. code-block:: console set service ipoe-server authentication mode 'radius' set service ipoe-server authentication radius-server 10.100.100.1 secret 'password' @@ -105,7 +105,7 @@ Bandwidth Shaping for local users The rate-limit is set in kbit/sec. -.. code-block:: sh +.. code-block:: console set service ipoe-server authentication interface eth2 mac-address 08:00:27:2f:d8:06 rate-limit download '500' set service ipoe-server authentication interface eth2 mac-address 08:00:27:2f:d8:06 rate-limit upload '500' @@ -115,7 +115,7 @@ The rate-limit is set in kbit/sec. set service ipoe-server interface eth2 client-subnet '192.168.0.0/24' -.. code-block:: sh +.. code-block:: console vyos@vyos# run show ipoe-server sessions |