Migrate new file structure to crux (#435)

* order workflows and add submodule

* rename gitmodules file

* delete docs/.gitignore

* add vyos custom linter

* correct __pycache__ in gitignore

* add test-coverage.py

* move draw.io folder

* arrange changelog, install history and about

* arrange: firewall

* arrange: highavailability

* arrange: loadbalancing

* arrange: nat

* arrange: services

* sort configexamples and configuration interfaces

* wireles: rename wireless

* rearrange: Protocols and Policy

* rearrange: Firewall and Zone Policy

* rearrange: Interfaces

* rearrange: Interfaces

* rearrange: dynamic DNS

* hostinfo: add page to index

* rearrange: appendix

* venv: add Pipfile

* rearrange: contributing

* index: remove debugging

* rearrange: fix all figure and refs

* rearrange: commandtree

* fix: cli, openvpn, install headline level

* protocols: change headline

* firewall: move mss clamping

* ip: separate ipv4 and ipv6

* arp: move to static page

* igmp: rename multicast page

* Update to year 2021

1 files changed, 0 insertions, 129 deletions

diff --git a/docs/services/ipoe-server.rst b/docs/services/ipoe-server.rst
deleted file mode 100644
index eed4cced..00000000
--- a/docs/services/ipoe-server.rst
+++ /dev/null
@@ -1,129 +0,0 @@
-IPoE server
-------------
-
-VyOS utilizes `accel-ppp`_ to provide IPoE server functionality. It can be
-used with local authentication (mac-address) or a connected RADIUS server.
-
-.. note:: **Please be aware, due to an upstream bug, config changes/commits
-   will restart the ppp daemon and will reset existing IPoE sessions,
-   in order to become effective.**
-
-Configuration
-^^^^^^^^^^^^^
-
-IPoE can be configure on different interfaces, it will depend on each specific situation which interface will provide IPoE to clients.
-The clients mac address and the incoming interface is being used as control parameter, to authenticate a client.
-
-The example configuration below will assign an IP to the client on the incoming interface eth2 with the client mac address 08:00:27:2f:d8:06.
-Other DHCP discovery requests will be ignored, unless the client mac has been enabled in the configuration.
-
-.. code-block:: none
-
-  set service ipoe-server authentication interface eth2 mac-address 08:00:27:2f:d8:06
-  set service ipoe-server authentication mode 'local'
-  set service ipoe-server dns-server server-1 '8.8.8.8'
-  set service ipoe-server dns-server server-2 '8.8.4.4'
-  set service ipoe-server interface eth2 client-subnet '192.168.0.0/24'
-
-
-The first address of the parameter ``client-subnet``, will be used as the default gateway. 
-Connected sessions can be checked via the ``show ipoe-server sessions`` command.
-
-.. code-block:: none
-
-  vyos@vyos:~$ show ipoe-server sessions
-
-  ifname | called-sid |    calling-sid    |     ip      | ip6 | ip6-dp | rate-limit | state  |  uptime  |        sid
-  -------+------------+-------------------+-------------+-----+--------+------------+--------+----------+------------------
-  ipoe0  | eth2       | 08:00:27:2f:d8:06 | 192.168.0.2 |     |        |            | active | 00:45:05 | dccc870fd3134612
-
-
-IPv6 SLAAC and IA-PD
-====================
-
-To configure IPv6 assignments for clients, two options need to be configured. A global prefix which is terminated on the clients cpe and a delegated prefix, the client can use
-for devices routed via the clients cpe.
-
-IPv6 DNS addresses are optional.
-
-.. code-block:: none
-
-  set service ipoe-server authentication interface eth3 mac-address 08:00:27:2F:D8:06
-  set service ipoe-server authentication mode 'local'
-  set service ipoe-server client-ipv6-pool delegate-prefix '2001:db8:1::/48,56'
-  set service ipoe-server client-ipv6-pool prefix '2001:db8::/48,64'
-  set service ipoe-server dnsv6-server server-1 '2001:db8::'
-  set service ipoe-server dnsv6-server server-2 '2001:db8:aaa::'
-  set service ipoe-server dnsv6-server server-3 '2001:db8:bbb::'
-  set service ipoe-server interface eth3 client-subnet '192.168.1.0/24'
-
-.. code-block:: none
-
-  vyos@ipoe-server# run sh ipoe-server sessions 
-  ifname | called-sid |    calling-sid    |     ip      |               ip6               | ip6-dp          | rate-limit | state  |  uptime  |        sid       
-  -------+------------+-------------------+-------------+---------------------------------+-----------------+------------+--------+----------+------------------
-  ipoe0  | eth3       | 08:00:27:2f:d8:06 | 192.168.1.2 | 2001:db8::a00:27ff:fe2f:d806/64 | 2001:db8:1::/56 |            | active | 01:02:59 | 4626faf71b12cc25  
-
-
-The clients cpe can now communicate via IPv4 or IPv6. All devices behind ``2001:db8::a00:27ff:fe2f:d806/64`` can use addresses from ``2001:db8:1::/56`` and can
-globally communicate without the need of any NAT rules.
-
-
-Automatic VLAN creation
-=======================
-
-To create VLANs per user during runtime, the following settings are required on a per interface basis. VLAN ID and VLAN range can be present in the configuration at the same time.
-
-.. code-block:: none
-
-  set service ipoe-server interface eth2 network vlan
-  set service ipoe-server interface eth2 vlan-id 100
-  set service ipoe-server interface eth2 vlan-id 200
-  set service ipoe-server interface eth2 vlan-range 1000-2000
-  set service ipoe-server interface eth2 vlan-range 2500-2700
-
-
-RADIUS Setup
-^^^^^^^^^^^^
-
-To use a RADIUS server for authentication and bandwidth-shaping, the following example configuration can be used.
-
-.. code-block:: none
-
-  set service ipoe-server authentication mode 'radius'
-  set service ipoe-server authentication radius-server 10.100.100.1 secret 'password'
-
-
-Bandwidth Shaping
-^^^^^^^^^^^^^^^^^
-
-Bandwidth rate limits can be set for local users within the configuration or via RADIUS based attributes.
-
-
-Bandwidth Shaping for local users 
-=================================
-
-The rate-limit is set in kbit/sec.
-
-.. code-block:: none
-
-  set service ipoe-server authentication interface eth2 mac-address 08:00:27:2f:d8:06 rate-limit download '500'
-  set service ipoe-server authentication interface eth2 mac-address 08:00:27:2f:d8:06 rate-limit upload '500'
-  set service ipoe-server authentication mode 'local'
-  set service ipoe-server dns-server server-1 '8.8.8.8'
-  set service ipoe-server dns-server server-2 '8.8.4.4'
-  set service ipoe-server interface eth2 client-subnet '192.168.0.0/24'
-
-
-.. code-block:: none
-
-  vyos@vyos# run show ipoe-server sessions 
-
-  ifname | called-sid |    calling-sid    |     ip      | ip6 | ip6-dp | rate-limit | state  |  uptime  |        sid       
-  -------+------------+-------------------+-------------+-----+--------+------------+--------+----------+------------------
-  ipoe0  | eth2       | 08:00:27:2f:d8:06 | 192.168.0.2 |     |        | 500/500    | active | 00:00:05 | dccc870fd31349fb
-
-
-
-
-.. _`accel-ppp`: https://accel-ppp.org/