diff options
| author | Christian Poessinger <christian@poessinger.com> | 2020-12-04 08:06:09 +0100 |
|---|---|---|
| committer | GitHub <noreply@github.com> | 2020-12-04 08:06:09 +0100 |
| commit | 8281770d1b85c646f27832f48f5ea7976788032c (patch) | |
| tree | 5945405df2e4a0725442c20b7fcb0025ecb60963 /docs/services/pppoe-server.rst | |
| parent | c81dd16b0fe2b4d095b56738d82990839bf38274 (diff) | |
| parent | f0fc9200876a0e44644db3e8e0f8f3d2aaa7238d (diff) | |
| download | vyos-documentation-8281770d1b85c646f27832f48f5ea7976788032c.tar.gz vyos-documentation-8281770d1b85c646f27832f48f5ea7976788032c.zip | |
Merge pull request #384 from DmitriyEshenko/patch-21
Replace local-ip option to gateway-address
Diffstat (limited to 'docs/services/pppoe-server.rst')
| -rw-r--r-- | docs/services/pppoe-server.rst | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/docs/services/pppoe-server.rst b/docs/services/pppoe-server.rst index e710ba6a..1b7082ec 100644 --- a/docs/services/pppoe-server.rst +++ b/docs/services/pppoe-server.rst @@ -39,7 +39,7 @@ First steps Use this command to define the interface the PPPoE server will use to listen for PPPoE clients. -.. cfgcmd:: set service pppoe-server local-ip <address> +.. cfgcmd:: set service pppoe-server gateway-address <address> Use this command to configure the local gateway IP address. @@ -57,7 +57,7 @@ To automatically assign the client an IP address as tunnel endpoint, a client IP pool is needed. The source can be either RADIUS or a local subnet or IP range definition. -Once the local tunnel endpoint ``set service pppoe-server local-ip +Once the local tunnel endpoint ``set service pppoe-server gateway-address '10.1.1.2'`` has been defined, the client IP pool can be either defined as a range or as subnet using CIDR notation. If the CIDR notation is used, multiple subnets can be setup which are used sequentially. @@ -116,7 +116,7 @@ and then configure it. set service pppoe-server authentication mode 'radius' set service pppoe-server authentication radius server 10.1.100.1 key 'secret' set service pppoe-server interface 'eth1' - set service pppoe-server local-ip '10.1.1.2' + set service pppoe-server gateway-address '10.1.1.2' RADIUS provides the IP addresses in the example above via Framed-IP-Address. @@ -210,7 +210,7 @@ For Local Users set service pppoe-server name-server '10.100.100.1' set service pppoe-server name-server '10.100.200.1' set service pppoe-server interface 'eth1' - set service pppoe-server local-ip '10.1.1.2' + set service pppoe-server gateway-address '10.1.1.2' Once the user is connected, the user session is using the set limits and @@ -359,7 +359,7 @@ address from the pool 10.1.1.100-111, terminates at the local endpoint set service pppoe-server client-ip-pool start '10.1.1.100' set service pppoe-server client-ip-pool stop '10.1.1.111' set service pppoe-server interface eth1 - set service pppoe-server local-ip '10.1.1.2' + set service pppoe-server gateway-address '10.1.1.2' set service pppoe-server name-server '10.100.100.1' set service pppoe-server name-server '10.100.200.1' @@ -381,7 +381,7 @@ The example below covers a dual-stack configuration via pppoe-server. set service pppoe-server name-server '8.8.8.8' set service pppoe-server name-server '2001:4860:4860::8888' set service pppoe-server interface 'eth2' - set service pppoe-server local-ip '10.100.100.1' + set service pppoe-server gateway-address '10.100.100.1' The client, once successfully authenticated, will receive an IPv4 and an IPv6 /64 address to terminate the pppoe endpoint on the client side and |