remove all enclosing '' from cfgcmd/opcmd

4 files changed, 23 insertions, 23 deletions

diff --git a/docs/services/dhcp.rst b/docs/services/dhcp.rst
index 94efeaf1..bcadb673 100644
--- a/docs/services/dhcp.rst
+++ b/docs/services/dhcp.rst
@@ -146,23 +146,23 @@ inside the subnet definition but can be outside of the range statement.
 DHCP Options
 ------------
 
-.. cfgcmd:: set service dhcp-server shared-network-name '<name>' subnet 192.0.2.0/24 default-router '<address>'
+.. cfgcmd:: set service dhcp-server shared-network-name <name> subnet 192.0.2.0/24 default-router <address>
 
    Specify the default routers IPv4 address which should be used in this subnet.
    This can - of course - be a VRRP address (DHCP option 003).
 
-.. cfgcmd:: set service dhcp-server shared-network-name '<name>' subnet 192.0.2.0/24 dns-server '<address>'
+.. cfgcmd:: set service dhcp-server shared-network-name <name> subnet 192.0.2.0/24 dns-server <address>
 
    Specify the DNS nameservers used (Option 006). This option may be used
    mulltiple times to specify additional DNS nameservers.
 
-.. cfgcmd:: set service dhcp-server shared-network-name '<name>' subnet 192.0.2.0/24 domain-name '<domain-name>'
+.. cfgcmd:: set service dhcp-server shared-network-name <name> subnet 192.0.2.0/24 domain-name <domain-name>
 
    The domain-name parameter should be the domain name that will be appended to
    the client's hostname to form a fully-qualified domain-name (FQDN) (DHCP
    Option 015).
 
-.. cfgcmd:: set service dhcp-server shared-network-name '<name>' subnet 192.0.2.0/24 domain-search '<domain-name>'
+.. cfgcmd:: set service dhcp-server shared-network-name <name> subnet 192.0.2.0/24 domain-search <domain-name>
 
    The domain-name parameter should be the domain name used when completing DNS
    request where no full FQDN is passed. This option can be given multiple times
@@ -401,41 +401,41 @@ Configuration Options
    Clients receiving advertise messages from multiple servers choose the server
    with the highest preference value. The range for this value is ``0...255``.
 
-.. cfgcmd:: set service dhcpv6-server shared-network-name '<name>' subnet '<v6net>' lease-time {default | maximum | minimum}
+.. cfgcmd:: set service dhcpv6-server shared-network-name <name> subnet <prefix> lease-time {default | maximum | minimum}
 
    The default lease time for DHCPv6 leases is 24 hours. This can be changed by
    supplying a ``default-time``, ``maximum-time`` and ``minimum-time``. All
    values need to be supplied in seconds.
 
-.. cfgcmd:: set service dhcpv6-server shared-network-name '<name>' subnet '<v6net>' nis-domain '<domain-name>'
+.. cfgcmd:: set service dhcpv6-server shared-network-name <name> subnet <prefix> nis-domain <domain-name>
 
    A :abbr:`NIS (Network Information Service)` domain can be set to be used for
    DHCPv6 clients.
 
-.. cfgcmd:: set service dhcpv6-server shared-network-name '<name>' subnet '<v6net>' nisplus-domain '<domain-name>'
+.. cfgcmd:: set service dhcpv6-server shared-network-name <name> subnet <prefix> nisplus-domain <domain-name>
 
    The procedure to specify a :abbr:`NIS+ (Network Information Service Plus)`
    domain is similar to the NIS domain one:
 
-.. cfgcmd:: set service dhcpv6-server shared-network-name '<name>' subnet '<v6net>' nis-server '<address>'
+.. cfgcmd:: set service dhcpv6-server shared-network-name <name> subnet <prefix> nis-server <address>
 
    Specify a NIS server address for DHCPv6 clients.
 
-.. cfgcmd:: set service dhcpv6-server shared-network-name '<name>' subnet '<v6net>' nisplus-server '<address>'
+.. cfgcmd:: set service dhcpv6-server shared-network-name <name> subnet <prefix> nisplus-server <address>
 
    Specify a NIS+ server address for DHCPv6 clients.
 
-.. cfgcmd:: set service dhcpv6-server shared-network-name '<name>' subnet '<v6net>' sip-server-address '<address>'
+.. cfgcmd:: set service dhcpv6-server shared-network-name <name> subnet <prefix> sip-server-address <address>
 
    Specify a :abbr:`SIP (Session Initiation Protocol)` server by IPv6 address
    for all DHCPv6 clients.
 
-.. cfgcmd:: set service dhcpv6-server shared-network-name '<name>' subnet '<v6net>' sip-server-name '<fqdn>'
+.. cfgcmd:: set service dhcpv6-server shared-network-name <name> subnet <prefix> sip-server-name <fqdn>
 
    Specify a :abbr:`SIP (Session Initiation Protocol)` server by FQDN for all
    DHCPv6 clients.
 
-.. cfgcmd:: set service dhcpv6-server shared-network-name '<name>' subnet '<v6net>' sntp-server-address '<address>'
+.. cfgcmd:: set service dhcpv6-server shared-network-name <name> subnet <prefix> sntp-server-address <address>
 
    A SNTP server address can be specified for DHCPv6 clients.
 
@@ -570,7 +570,7 @@ https://wiki.vyos.net/wiki/Network_address_setup.
 Configuration
 -------------
 
-.. cfgcmd:: set service dhcp-relay interface '<interface>'
+.. cfgcmd:: set service dhcp-relay interface <interface>
 
    Enable the DHCP relay service on the given interface.
 
diff --git a/docs/services/ssh.rst b/docs/services/ssh.rst
index fde575ea..1dd996d4 100644
--- a/docs/services/ssh.rst
+++ b/docs/services/ssh.rst
@@ -30,17 +30,17 @@ and integrity of data over an unsecured network, such as the Internet.
 Configuration
 =============
 
-.. cfgcmd:: set service ssh port '<number>'
+.. cfgcmd:: set service ssh port <port>
 
-Enabling SSH only requires you to specify the port ``<number>`` you want SSH to
+Enabling SSH only requires you to specify the port ``<port>`` you want SSH to
 listen on. By default, SSH runs on port 22.
 
-.. cfgcmd:: set service ssh listen-address '<address>'
+.. cfgcmd:: set service ssh listen-address <address>
 
 Specify IPv4/IPv6 listen address of SSH server. Multiple addresses can be
 defined.
 
-.. cfgcmd:: set service ssh ciphers '<cipher>'
+.. cfgcmd:: set service ssh ciphers <cipher>
 
 Define allowed ciphers used for the SSH connection. A number of allowed ciphers
 can be specified, use multiple occurrences to allow multiple ciphers.
@@ -71,7 +71,7 @@ security!
 Disable the host validation through reverse DNS lookups - can speedup login
 time when reverse lookup is not possible.
 
-.. cfgcmd:: set service ssh macs '<mac>'
+.. cfgcmd:: set service ssh macs <mac>
 
 Specifies the available :abbr:`MAC (Message Authentication Code)` algorithms.
 The MAC algorithm is used in protocol version 2 for data integrity protection.
diff --git a/docs/services/tftp.rst b/docs/services/tftp.rst
index 8647dfa8..ce87011c 100644
--- a/docs/services/tftp.rst
+++ b/docs/services/tftp.rst
@@ -22,7 +22,7 @@ files.
    content on image upgrades. Any directory under ``/config`` is save at this
    will be migrated.
 
-.. cfgcmd:: set service tftp-server listen-address '<address>'
+.. cfgcmd:: set service tftp-server listen-address <address>
 
 Configure the IPv4 or IPv6 listen address of the TFTP server. Multiple IPv4 and
 IPv6 addresses can be given. There will be one TFTP server instances listening
diff --git a/docs/services/udp-broadcast-relay.rst b/docs/services/udp-broadcast-relay.rst
index 10939c9d..f9e1b03e 100644
--- a/docs/services/udp-broadcast-relay.rst
+++ b/docs/services/udp-broadcast-relay.rst
@@ -17,23 +17,23 @@ support 99 IDs!
 Configuration
 -------------
 
-.. cfgcmd:: set service broadcast-relay id '<n>' description '<description>'
+.. cfgcmd:: set service broadcast-relay id <n> description <description>
 
    A description can be added for each and every unique relay ID. This is
    usefull to distinguish between multiple different ports/appliactions.
 
-.. cfgcmd:: set service broadcast-relay id '<n>' interface '<interface>'
+.. cfgcmd:: set service broadcast-relay id <n> interface <interface>
 
    The interface used to receive and relay individual broadcast packets. If you
    want to receive/relay packets on both `eth1` and `eth2` both interfaces need
    to be added.
 
-.. cfgcmd:: set service broadcast-relay id '<n>' port '<port>'
+.. cfgcmd:: set service broadcast-relay id <n> port <port>
 
    The UDP port number used by your apllication. It is mandatory for this kind
    of operation.
 
-.. cfgcmd:: set service broadcast-relay id '<n>' disable
+.. cfgcmd:: set service broadcast-relay id <n> disable
 
    Each broadcast relay instance can be individually disabled without deleting
    the configured node by using the following command: