user-management: use documented section style guide

1 files changed, 0 insertions, 128 deletions

diff --git a/docs/system/login-users.rst b/docs/system/login-users.rst
deleted file mode 100644
index 424d1978..00000000
--- a/docs/system/login-users.rst
+++ /dev/null
@@ -1,128 +0,0 @@
-.. _systemusers:
-
-Login
------
-
-The default VyOS user account (`vyos`), as well as newly created user accounts,
-have all capabilities to configure the system. All accounts have sudo capabilities
-and therefore can operate as root on the system. Setting the level to admin is
-optional, all accounts on the system will have admin privileges.
-
-Both local administered and remote administered RADIUS (Remote Authentication
-Dial-In User Service) accounts are supported.
-
-Local
-^^^^^
-
-Create user account `jsmith` and the password `mypassword`.
-
-.. code-block:: none
-
-  set system login user jsmith full-name "Johan Smith"
-  set system login user jsmith authentication plaintext-password mypassword
-
-The command:
-
-.. code-block:: none
-
-  show system login
-
-will show the contents of :code:`system login` configuration node:
-
-.. code-block:: none
-
-  user jsmith {
-      authentication {
-          encrypted-password $6$0OQH[...]vViOFPBoFxIi.iqjqrvsQdQ./cfiiPT.
-          plaintext-password ""
-      }
-      full-name "Johan Smith"
-      level admin
-  }
-
-SSH with Public Keys
-********************
-
-The following command will load the public key `dev.pub` for user `jsmith`
-
-.. code-block:: none
-
-  loadkey jsmith dev.pub
-
-.. note:: This requires uploading the `dev.pub` public key to the VyOS router
-   first. As an alternative you can also load the SSH public key directly
-   from a remote system:
-
-.. code-block:: none
-
-  loadkey jsmith scp://devuser@dev001.vyos.net/home/devuser/.ssh/dev.pub
-
-In addition SSH public keys can be fully added using the CLI. Each key can be
-given a unique identifier, `calypso` is used oin the example below to id an SSH
-key.
-
-.. code-block:: none
-
-  set system login user jsmith authentication public-keys callisto key 'AAAABo..Q=='
-  set system login user jsmith authentication public-keys callisto type 'ssh-rsa'
-
-RADIUS
-^^^^^^
-
-VyOS supports using one or more RADIUS servers as backend for user authentication.
-
-The following command sets up two servers for RADIUS authentication, one with a
-discrete timeout of `5` seconds and a discrete port of `1812` and the other using
-a default timeout and port.
-
-.. code-block:: none
-
-  set system login radius server 192.168.1.2 secret 's3cr3t0815'
-  set system login radius server 192.168.1.2 timeout '5'
-  set system login radius server 192.168.1.2 port '1812'
-  set system login radius server 192.168.1.3 secret 's3cr3t0816'
-
-This configuration results in:
-
-.. code-block:: none
-
-  show system login
-   radius {
-       server 192.168.1.2 {
-           secret s3cr3t0815
-           timeout 5
-           port 1812
-       }
-       server 192.168.1.3 {
-           secret s3cr3t0816
-       }
-   }
-
-.. note:: If you wan't to have admin users to authenticate via RADIUS it is
-   essential to sent the ``Cisco-AV-Pair shell:priv-lvl=15`` attribute. Without
-   the attribute you will only get regular, non privilegued, system users.
-
-Source Address
-**************
-
-RADIUS servers could be hardened by only allowing certain IP addresses to connect.
-As of this the source address of each RADIUS query can be configured. If this is
-not set incoming connections to the RADIUS server will use the nearest interface
-address pointing towards the RADIUS server - making it error prone on e.g. OSPF
-networks when a link fails.
-
-.. code-block:: none
-
-  set system login radius source-address 192.168.1.254
-
-Login Banner
-^^^^^^^^^^^^
-
-You are able to set post-login or pre-login messages with the following lines:
-
-.. code-block:: none
-
-  set system login banner pre-login "UNAUTHORIZED USE OF THIS SYSTEM IS PROHIBITED\n"
-  set system login banner post-login "Welcome to VyOS"
-
-**\\n** create a newline.