contributing: clear structure

1 files changed, 0 insertions, 207 deletions

diff --git a/docs/testing.rst b/docs/testing.rst
deleted file mode 100644
index d5df9d59..00000000
--- a/docs/testing.rst
+++ /dev/null
@@ -1,207 +0,0 @@
-.. _testing:
-
-#######
-Testing
-#######
-
-One of the major advantages introduced in VyOS 1.3 is an autmated test framework.
-When assembling an ISO image multiple things can go wrong badly and publishing
-a faulty ISO makes no sense. The user is disappointed by the quality of the image
-and the developers get flodded with bug reports over and over again.
-
-As the VyOS documentation is not only for users but also for the developers -
-and we keep no secret documentation - this section describes how the automated
-testing works.
-
-Jenkins CI
-==========
-
-Our `VyOS CI`_ system is based on Jenkins and builds all our required packages
-for VyOS 1.2 to 1.4. In addition to the package build, there is the vyos-build
-Job which builds and tests the VyOS ISO image which is published after a
-successfull test drive.
-
-We differentiate in two independent tests, which are both run in parallel by
-two separate QEmu instances which are launched via ``make test`` and ``make
-testc`` from within the vyos-build_ repository.
-
-Smoketests
-==========
-
-Smoketests executes predefined VyOS CLI commands and checks if the desired
-daemon/service configuration is rendert - that is how to put it "short".
-
-When and ISO image is assembled by the `VyOS CI`_, the ``BUILD_SMOKETEST``
-parameter is enabled by default, which will extend the ISO configuration line
-with the following packages:
-
-.. code-block:: python
-
-  def CUSTOM_PACKAGES = ''
-    if (params.BUILD_SMOKETESTS)
-      CUSTOM_PACKAGES = '--custom-package vyos-1x-smoketest'
-
-So if you plan to build your own custom ISO image and wan't to make use of our
-smoketests, ensure that you have the `vyos-1x-smoketest` package installed.
-
-The ``make test`` command from the vyos-build_ repository will launch a new
-QEmu instance and the ISO image is first installed to the virtual harddisk.
-
-After its first boot into the newly installed system the main Smoketest script
-is executed, it can be found here: `/usr/bin/vyos-smoketest`
-
-The script only searches for executable "test-cases" under
-``/usr/libexec/vyos/tests/smoke/cli/`` and executes them one by one.
-
-.. note:: As Smoketests will alter the system configuration and you are logged
-   in remote you may loose your connection to the system.
-
-Manual Smoketest Run
---------------------
-
-On the other hand - as each test is contain in its own file - one can always
-execute a single Smoketest by hand by simply running the Python test scripts.
-
-Example:
-
-.. code-block:: none
-
-  vyos@vyos:~$ /usr/libexec/vyos/tests/smoke/cli/test_protocols_bgp.py
-  test_bgp_01_simple (__main__.TestProtocolsBGP) ... ok
-  test_bgp_02_neighbors (__main__.TestProtocolsBGP) ... ok
-  test_bgp_03_peer_groups (__main__.TestProtocolsBGP) ... ok
-  test_bgp_04_afi_ipv4 (__main__.TestProtocolsBGP) ... ok
-  test_bgp_05_afi_ipv6 (__main__.TestProtocolsBGP) ... ok
-  test_bgp_06_listen_range (__main__.TestProtocolsBGP) ... ok
-  test_bgp_07_l2vpn_evpn (__main__.TestProtocolsBGP) ... ok
-  test_bgp_08_zebra_route_map (__main__.TestProtocolsBGP) ... ok
-  test_bgp_09_distance_and_flowspec (__main__.TestProtocolsBGP) ... ok
-  test_bgp_10_vrf_simple (__main__.TestProtocolsBGP) ... ok
-  test_bgp_11_confederation (__main__.TestProtocolsBGP) ... ok
-  test_bgp_12_v6_link_local (__main__.TestProtocolsBGP) ... ok
-  test_bgp_13_solo (__main__.TestProtocolsBGP) ... ok
-
-  ----------------------------------------------------------------------
-  Ran 13 tests in 348.191s
-
-  OK
-
-Interface based tests
----------------------
-
-Our smoketests not only test daemons and serives, but also check if what we
-configure for an interface works. Thus there is a common base classed named:
-``base_interfaces_test.py`` which holds all the common code that an interface
-supports and is tested.
-
-Those common tests consists out of:
-
-* Add one or more IP addresses
-* DHCP client and DHCPv6 prefix delegation
-* MTU size
-* IP and IPv6 options
-* Port description
-* Port disable
-* VLANs (QinQ and regular 802.1q)
-* ...
-
-.. note:: When you are working on interface configuration and you also wan't to
-   test if the Smoketests pass you would normally loose the remote SSH connection
-   to your :abbr:`DUT (Device Under Test)`. To handle this issue, some of the
-   interface based tests can be called with an environment variable beforehand
-   to limit the number of interfaces used in the test. By default all interface
-   e.g. all Ethernet interfaces are used.
-
-.. code-block:: none
-
-  vyos@vyos:~$ TEST_ETH="eth1 eth2" /usr/libexec/vyos/tests/smoke/cli/test_interfaces_bonding.py
-  test_add_multiple_ip_addresses (__main__.BondingInterfaceTest) ... ok
-  test_add_single_ip_address (__main__.BondingInterfaceTest) ... ok
-  test_bonding_hash_policy (__main__.BondingInterfaceTest) ... ok
-  test_bonding_lacp_rate (__main__.BondingInterfaceTest) ... ok
-  test_bonding_min_links (__main__.BondingInterfaceTest) ... ok
-  test_bonding_remove_member (__main__.BondingInterfaceTest) ... ok
-  test_dhcpv6_client_options (__main__.BondingInterfaceTest) ... ok
-  test_dhcpv6pd_auto_sla_id (__main__.BondingInterfaceTest) ... ok
-  test_dhcpv6pd_manual_sla_id (__main__.BondingInterfaceTest) ... ok
-  test_interface_description (__main__.BondingInterfaceTest) ... ok
-  test_interface_disable (__main__.BondingInterfaceTest) ... ok
-  test_interface_ip_options (__main__.BondingInterfaceTest) ... ok
-  test_interface_ipv6_options (__main__.BondingInterfaceTest) ... ok
-  test_interface_mtu (__main__.BondingInterfaceTest) ... ok
-  test_ipv6_link_local_address (__main__.BondingInterfaceTest) ... ok
-  test_mtu_1200_no_ipv6_interface (__main__.BondingInterfaceTest) ... ok
-  test_span_mirror (__main__.BondingInterfaceTest) ... ok
-  test_vif_8021q_interfaces (__main__.BondingInterfaceTest) ... ok
-  test_vif_8021q_lower_up_down (__main__.BondingInterfaceTest) ... ok
-  test_vif_8021q_mtu_limits (__main__.BondingInterfaceTest) ... ok
-  test_vif_8021q_qos_change (__main__.BondingInterfaceTest) ... ok
-  test_vif_s_8021ad_vlan_interfaces (__main__.BondingInterfaceTest) ... ok
-  test_vif_s_protocol_change (__main__.BondingInterfaceTest) ... ok
-
-  ----------------------------------------------------------------------
-  Ran 23 tests in 244.694s
-
-  OK
-
-This will limit the `bond` interface test to only make use of `eth1` and `eth2`
-as member ports.
-
-Config Load Tests
-=================
-
-The other part of our tests are called "config load tests". The config load tests
-will load - one after another - arbitrary configuration files to test if the
-configuration migration scripts work as designed and that a given set of
-functionality still can be loaded with a fresh VyOS ISO image.
-
-The configurations are all derived from production systems and can not only act
-as a testcase but also as reference if one wants to enable a certain feature.
-The configurations can be found here:
-https://github.com/vyos/vyos-1x/tree/current/smoketest/configs
-
-The entire test is controlled by the main wrapper script ``/usr/bin/vyos-configtest``
-which behaves in the same way as the main smoketest script. It scans the folder
-for potential configuration files and issues a ``load`` command one after another.
-
-Manual config load test
------------------------
-
-One is not bound to load all configurations one after another but can also load
-individual test configurations on his own.
-
-.. code-block:: none
-
-  vyos@vyos:~$ configure
-  load[edit]
-
-  vyos@vyos# load /usr/libexec/vyos/tests/config/ospf-small
-  Loading configuration from '/usr/libexec/vyos/tests/config/ospf-small'
-  Load complete. Use 'commit' to make changes effective.
-  [edit]
-  vyos@vyos# compare
-  [edit interfaces ethernet eth0]
-  -hw-id 00:50:56:bf:c5:6d
-  [edit interfaces ethernet eth1]
-  +duplex auto
-  -hw-id 00:50:56:b3:38:c5
-  +speed auto
-  [edit interfaces]
-  -ethernet eth2 {
-  -    hw-id 00:50:56:b3:9c:1d
-  -}
-  -vti vti1 {
-  -    address 192.0.2.1/30
-  -}
-  ...
-
-  vyos@vyos# commit
-  vyos@vyos#
-
-.. note:: Some of the configurations have preconditions which need to be met.
-   Those most likely include generation of crypographic keys before the config
-   can be applied - you will get a commit error otherwise. If you are interested
-   how those preconditions are fulfilled check the vyos-build_ repository and
-   the ``scripts/check-qemu-install`` file.
-
-.. include:: /_include/common-references.txt