vpn: dmvpn: move example from blueprints to the dmvpn chapter

1 files changed, 191 insertions, 0 deletions

diff --git a/docs/vpn/ipsec.rst b/docs/vpn/ipsec.rst
new file mode 100644
index 00000000..8b0ad3b3
--- /dev/null
+++ b/docs/vpn/ipsec.rst
@@ -0,0 +1,191 @@
+.. _ipsec:
+
+#####
+IPsec
+#####
+
+Generic Routing Encapsulation (GRE), GRE/IPsec (or IPIP/IPsec, SIT/IPsec, or any
+other stateless tunnel protocol over IPsec) is the usual way to protect the
+traffic inside a tunnel.
+
+An advantage of this scheme is that you get a real interface with its own
+address, which makes it easier to setup static routes or use dynamic routing
+protocols without having to modify IPsec policies. The other advantage is that
+it greatly simplifies router to router communication, which can be tricky with
+plain IPsec because the external outgoing address of the router usually doesn't
+match the IPsec policy of typical site-to-site setup and you need to add special
+configuration for it, or adjust the source address for outgoing traffic of your
+applications. GRE/IPsec has no such problem and is completely transparent for
+the applications.
+
+GRE/IPIP/SIT and IPsec are widely accepted standards, which make this scheme
+easy to implement between VyOS and virtually any other router.
+
+For simplicity we'll assume that the protocol is GRE, it's not hard to guess
+what needs to be changed to make it work with a different protocol. We assume
+that IPsec will use pre-shared secret authentication and will use AES128/SHA1
+for the cipher and hash. Adjust this as necessary.
+
+.. NOTE:: VMware users should ensure that VMXNET3 adapters used, e1000 adapters
+   have known issue with GRE processing
+
+IPsec policy matching GRE
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The first and arguably cleaner option is to make your IPsec policy match GRE
+packets between external addresses of your routers. This is the best option if
+both routers have static external addresses.
+
+Suppose the LEFT router has external address 192.0.2.10 on its eth0 interface,
+and the RIGHT router is 203.0.113.45
+
+On the LEFT:
+
+.. code-block:: none
+
+  # GRE tunnel
+  set interfaces tunnel tun0 encapsulation gre
+  set interfaces tunnel tun0 local-ip 192.0.2.10
+  set interfaces tunnel tun0 remote-ip 203.0.113.45
+  set interfaces tunnel tun0 address 10.10.10.1/30
+
+  ## IPsec
+  set vpn ipsec ipsec-interfaces interface eth0
+
+  # IKE group
+  set vpn ipsec ike-group MyIKEGroup proposal 1 dh-group '2'
+  set vpn ipsec ike-group MyIKEGroup proposal 1 encryption 'aes128'
+  set vpn ipsec ike-group MyIKEGroup proposal 1 hash 'sha1'
+
+  # ESP group
+  set vpn ipsec esp-group MyESPGroup proposal 1 encryption 'aes128'
+  set vpn ipsec esp-group MyESPGroup proposal 1 hash 'sha1'
+
+  # IPsec tunnel
+  set vpn ipsec site-to-site peer 203.0.113.45 authentication mode pre-shared-secret
+  set vpn ipsec site-to-site peer 203.0.113.45 authentication pre-shared-secret MYSECRETKEY
+
+  set vpn ipsec site-to-site peer 203.0.113.45 ike-group MyIKEGroup
+  set vpn ipsec site-to-site peer 203.0.113.45 default-esp-group MyESPGroup
+
+  set vpn ipsec site-to-site peer 203.0.113.45 local-address 192.0.2.10
+
+  # This will match all GRE traffic to the peer
+  set vpn ipsec site-to-site peer 203.0.113.45 tunnel 1 protocol gre
+
+On the RIGHT, setup by analogy and swap local and remote addresses.
+
+
+Source tunnel from loopbacks
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The scheme above doesn't work when one of the routers has a dynamic external
+address though. The classic workaround for this is to setup an address on a
+loopback interface and use it as a source address for the GRE tunnel, then setup
+an IPsec policy to match those loopback addresses.
+
+We assume that the LEFT router has static 192.0.2.10 address on eth0, and the
+RIGHT router has a dynamic address on eth0.
+
+**Setting up the GRE tunnel**
+
+On the LEFT:
+
+.. code-block:: none
+
+  set interfaces loopback lo address 192.168.99.1/32
+
+  set interfaces tunnel tun0 encapsulation gre
+  set interfaces tunnel tun0 address 10.10.10.1/30
+  set interfaces tunnel tun0 local-ip 192.168.99.1
+  set interfaces tunnel tun0 remote-ip 192.168.99.2
+
+On the RIGHT:
+
+.. code-block:: none
+
+  set interfaces loopback lo address 192.168.99.2/32
+
+  set interfaces tunnel tun0 encapsulation gre
+  set interfaces tunnel tun0 address 10.10.10.2/30
+  set interfaces tunnel tun0 local-ip 192.168.99.2
+  set interfaces tunnel tun0 remote-ip 192.168.99.1
+
+**Setting up IPSec**
+
+However, now you need to make IPsec work with dynamic address on one side. The
+tricky part is that pre-shared secret authentication doesn't work with dynamic
+address, so we'll have to use RSA keys.
+
+First, on both routers run the operational command "generate vpn rsa-key bits
+2048". You may choose different length than 2048 of course.
+
+.. code-block:: none
+
+  vyos@left# run generate vpn rsa-key bits 2048
+  Generating rsa-key to /config/ipsec.d/rsa-keys/localhost.key
+
+  Your new local RSA key has been generated
+  The public portion of the key is:
+
+  0sAQO2335[long string here]
+
+Then on the opposite router, add the RSA key to your config.
+
+.. code-block:: none
+
+  set vpn rsa-keys rsa-key-name LEFT rsa-key KEYGOESHERE
+
+Now you are ready to setup IPsec. You'll need to use an ID instead of address
+for the peer on the dynamic side.
+
+On the LEFT (static address):
+
+.. code-block:: none
+
+  set vpn rsa-keys rsa-key-name RIGHT rsa-key <PUBLIC KEY FROM THE RIGHT>
+
+  set vpn ipsec ipsec-interfaces interface eth0
+
+  set vpn ipsec esp-group MyESPGroup proposal 1 encryption aes128
+  set vpn ipsec esp-group MyESPGroup proposal 1 hash sha1
+
+  set vpn ipsec ike-group MyIKEGroup proposal 1 dh-group 2
+  set vpn ipsec ike-group MyIKEGroup proposal 1 encryption aes128
+  set vpn ipsec ike-group MyIKEGroup proposal 1 hash sha1
+
+  set vpn ipsec site-to-site peer @RIGHT authentication mode rsa
+  set vpn ipsec site-to-site peer @RIGHT authentication rsa-key-name RIGHT
+  set vpn ipsec site-to-site peer @RIGHT default-esp-group MyESPGroup
+  set vpn ipsec site-to-site peer @RIGHT ike-group MyIKEGroup
+  set vpn ipsec site-to-site peer @RIGHT local-address 192.0.2.10
+  set vpn ipsec site-to-site peer @RIGHT connection-type respond
+  set vpn ipsec site-to-site peer @RIGHT tunnel 1 local prefix 192.168.99.1/32  # Additional loopback address on the local
+  set vpn ipsec site-to-site peer @RIGHT tunnel 1 remote prefix 192.168.99.2/32 # Additional loopback address on the remote
+
+
+On the RIGHT (dynamic address):
+
+.. code-block:: none
+
+  set vpn rsa-keys rsa-key-name LEFT rsa-key <PUBLIC KEY FROM THE LEFT>
+
+  set vpn ipsec ipsec-interfaces interface eth0
+
+  set vpn ipsec esp-group MyESPGroup proposal 1 encryption aes128
+  set vpn ipsec esp-group MyESPGroup proposal 1 hash sha1
+
+  set vpn ipsec ike-group MyIKEGroup proposal 1 dh-group 2
+  set vpn ipsec ike-group MyIKEGroup proposal 1 encryption aes128
+  set vpn ipsec ike-group MyIKEGroup proposal 1 hash sha1
+
+  set vpn ipsec site-to-site peer 192.0.2.10 authentication id @RIGHT
+  set vpn ipsec site-to-site peer 192.0.2.10 authentication mode rsa
+  set vpn ipsec site-to-site peer 192.0.2.10 authentication rsa-key-name LEFT
+  set vpn ipsec site-to-site peer 192.0.2.10 remote-id @LEFT
+  set vpn ipsec site-to-site peer 192.0.2.10 connection-type initiate
+  set vpn ipsec site-to-site peer 192.0.2.10 default-esp-group MyESPGroup
+  set vpn ipsec site-to-site peer 192.0.2.10 ike-group MyIKEGroup
+  set vpn ipsec site-to-site peer 192.0.2.10 local-address any
+  set vpn ipsec site-to-site peer 192.0.2.10 tunnel 1 local prefix 192.168.99.2/32  # Additional loopback address on the local
+  set vpn ipsec site-to-site peer 192.0.2.10 tunnel 1 remote prefix 192.168.99.1/32 # Additional loopback address on the remote