Fix some typos and capitalizations

29 files changed, 72 insertions, 72 deletions

diff --git a/docs/about.rst b/docs/about.rst
index 15a672a6..0411344b 100644
--- a/docs/about.rst
+++ b/docs/about.rst
@@ -23,5 +23,5 @@ branch on the bottom left corner.
 VyOS CLI syntax may change between major (and sometimes minor) versions. Please
 always refer to the documentation matching your current, running installation.
 If a change in the CLI is required, VyOS will ship a so called migration script
-which will take care of adjusting the synatax. No action needs to be taken by
+which will take care of adjusting the syntax. No action needs to be taken by
 you.
diff --git a/docs/appendix/migrate-from-vyatta.rst b/docs/appendix/migrate-from-vyatta.rst
index 051d7cef..f15c3d5a 100644
--- a/docs/appendix/migrate-from-vyatta.rst
+++ b/docs/appendix/migrate-from-vyatta.rst
@@ -7,8 +7,8 @@ VyOS 1.x line aims to preserve backward compatibility and provide a safe
 upgrade path for existing Vyatta Core users. You may think of VyOS 1.0.0 as
 VC7.0.
 
-Vyatta release compatiblity
----------------------------
+Vyatta release compatibility
+----------------------------
 
 Vyatta Core releases from 6.5 to 6.6 should be 100% compatible.
 
diff --git a/docs/appendix/vyos-on-baremetal.rst b/docs/appendix/vyos-on-baremetal.rst
index 5f20a03f..36c58317 100644
--- a/docs/appendix/vyos-on-baremetal.rst
+++ b/docs/appendix/vyos-on-baremetal.rst
@@ -22,7 +22,7 @@ Shopping Cart
 
 Optional (10GE)
 ---------------
-If you wan't to get additional ethernet ports or even 10GE connectivity
+If you want to get additional ethernet ports or even 10GE connectivity
 the following optional parts will be required:
 
 * 1x Supermicro RSC-RR1U-E8 (Riser Card)
@@ -98,7 +98,7 @@ Shopping Cart
 * 1x VARIA Group Item 326745 19" dual rack for APU4
 * 1x Compex WLE900VX (Optional mini PCIe WiFi module)
 
-The 19" enclosure can accomodate up to two APU4 boards - there is a single and
+The 19" enclosure can accommodate up to two APU4 boards - there is a single and
 dual front cover.
 
 .. note:: Compex WLE900VX is only supported in mPCIe slot 1.
@@ -252,7 +252,7 @@ Qotom Q355G4
 
 The install on this Q355G4 box is pretty much plug and play. The port numbering
 the OS does might differ from the labels on the outside, but the UEFI firmware
-has a port blink test built in with MAC adresses so you can very quickly
+has a port blink test built in with MAC addresses so you can very quickly
 identify which is which. MAC labels are on the inside as well, and this test
 can be done from VyOS or plain Linux too. Default settings in the UEFI will
 make it boot, but depending on your installation wishes (i.e. storage type,
diff --git a/docs/appendix/vyos-on-vmware.rst b/docs/appendix/vyos-on-vmware.rst
index 6feb95ba..c4299cbf 100644
--- a/docs/appendix/vyos-on-vmware.rst
+++ b/docs/appendix/vyos-on-vmware.rst
@@ -1,6 +1,6 @@
 .. _vyosonvmware:

 

-Running on VMWare ESXi

+Running on VMware ESXi

 ######################

 

 ESXi 5.5 or later

@@ -14,7 +14,7 @@ using the normal process around `install image`.
 Memory Contention Considerations

 --------------------------------

 When the underlying ESXi host is approaching ~92% memory utilisation it will start the balloon process in s a 'soft' state to start reclaiming memory from guest operating systems. 

-This causes an artifical pressure using the vmmemctl driver on memory usage on the virtual guest. As VyOS by default does not have a swap file, this vmmemctl pressure is unable to

+This causes an artificial pressure using the vmmemctl driver on memory usage on the virtual guest. As VyOS by default does not have a swap file, this vmmemctl pressure is unable to

 force processes to move in memory data to the paging file, and blindly consumes memory forcing the virtual guest into a low memory state with no way to escape. The balloon can expand to 65% of 

 guest allocated memory, so a VyOS guest running >35% of memory usage, can encounter an out of memory situation, and trigger the kernel oom_kill process. At this point a weighted 

 lottery favouring memory hungry processes will be run with the unlucky winner being terminated by the kernel.

diff --git a/docs/configuration-overview.rst b/docs/configuration-overview.rst
index 96650b2b..cadaabac 100644
--- a/docs/configuration-overview.rst
+++ b/docs/configuration-overview.rst
@@ -6,7 +6,7 @@ Configuration Overview
 
 VyOS makes use of a unified configuration file for the entire systems
 configuration: ``/config/config.boot``. This allows easy template creation,
-backup, and replication of system configuration. A sytem can thus also be
+backup, and replication of system configuration. A system can thus also be
 easily cloned by simply copying the required configuration files.
 
 Terminology
@@ -341,7 +341,7 @@ Config Archive
 ==============
 
 VyOS automatically maintains backups of every previous configurations which
-has been comitted to the system.
+has been committed to the system.
 
 Local Archive
 -------------
diff --git a/docs/contributing/build-vyos.rst b/docs/contributing/build-vyos.rst
index d158594e..26a9c674 100644
--- a/docs/contributing/build-vyos.rst
+++ b/docs/contributing/build-vyos.rst
@@ -234,7 +234,7 @@ Many base system packages are pulled straight from Debian's main and contrib
 repositories, but there are exceptions.
 
 This chapter lists those exceptions and gives you a brief overview what we
-have done on those packages. If you only wan't to build yourself a fresh ISO
+have done on those packages. If you only want to build yourself a fresh ISO
 you can completely skip this chapter. It may become interesting once you have
 a VyOS deep dive.
 
diff --git a/docs/contributing/development.rst b/docs/contributing/development.rst
index fed06e6f..220dd362 100644
--- a/docs/contributing/development.rst
+++ b/docs/contributing/development.rst
@@ -62,7 +62,7 @@ your commit message, as shown below:
 * ``Jenkins: add current Git commit ID to build description``
 
 If there is no Phabricator_ reference in the commits of your pull request, we
-have to ask you to ammend the commit message. Otherwise we will have to reject
+have to ask you to amend the commit message. Otherwise we will have to reject
 it.
 
 Writing good commit messages
@@ -83,7 +83,7 @@ The format should be and is inspired by: https://git-scm.com/book/ch5-2.html
 
 * Followed by a message which describes all the details like:
 
-  * What/why/how something has been changed, makes everyones life easier when
+  * What/why/how something has been changed, makes everyone's life easier when
     working with `git bisect`
 
   * All text of the commit message should be wrapped at 72 characters if
@@ -93,7 +93,7 @@ The format should be and is inspired by: https://git-scm.com/book/ch5-2.html
   * If applicable a reference to a previous commit should be made linking
     those commits nicely when browsing the history: ``After commit abcd12ef
     ("snmp: this is a headline") a Python import statement is missing,
-    throwing the follwoing exception: ABCDEF``
+    throwing the following exception: ABCDEF``
 
 * Always use the ``-x`` option to the ``git cherry-pick`` command when back or
   forward porting an individual commit. This automatically appends the line:
@@ -109,7 +109,7 @@ Limits:
 
 * We only accept bugfixes in packages other than https://github.com/vyos/vyos-1x
   as no new functionality should use the old style templates (``node.def`` and
-  Perl/BASH code. Use the new stlye XML/Python interface instead.
+  Perl/BASH code. Use the new style XML/Python interface instead.
 
 Please submit your patches using the well-known GitHub pull-request against our
 repositories found in the VyOS GitHub organisation at https://github.com/vyos
@@ -120,7 +120,7 @@ Determinine source package
 
 Suppose you want to make a change in the webproxy script but yet you do not know
 which of the many VyOS packages ship this file. You can determine the VyOS
-package name in question by using Debians ``dpkg -S`` command of your running
+package name in question by using Debian's ``dpkg -S`` command of your running
 VyOS installation.
 
 .. code-block:: none
@@ -138,7 +138,7 @@ Fork Repository and submit Patch
 
 Forking the repository and submitting a GitHub pull-request is the preferred
 way of submitting your changes to VyOS. You can fork any VyOS repository to your
-very own GitHub account by just appending ``/fork`` to any repositories URL on
+very own GitHub account by just appending ``/fork`` to any repository's URL on
 GitHub. To e.g. fork the ``vyos-1x`` repository, open the following URL in your
 favourite browser: https://github.com/vyos/vyos-1x/fork
 
@@ -149,7 +149,7 @@ repository:
 
 * Fork: ``git remote add myfork https://github.com/<user>/vyos-1x.git``
 
-In order to record you as the author of the fix please indentify yourself to Git
+In order to record you as the author of the fix please identify yourself to Git
 by setting up your name and email. This can be done local for this one and only
 repository ``git config`` or globally using ``git config --global``.
 
@@ -260,7 +260,7 @@ Configuration Script Structure and Behaviour
 
 Your configuration script or operation mode script which is also written in
 Python3 should have a line break on 80 characters. This seems to be a bit odd
-nowadays but as some people also work remotly or programm using vi(m) this is
+nowadays but as some people also work remotely or program using vi(m) this is
 a fair good standard which I hope we can rely on.
 
 In addition this also helps when browsing the GitHub codebase on a mobile
@@ -563,7 +563,7 @@ Examples:
 
 * Good: "TCP connection timeout"
 * Bad: "tcp connection timeout"
-* Horrible: "Tcp connectin timeout"
+* Horrible: "Tcp connection timeout"
 
 Acronyms also **must** be capitalized to visually distinguish them from normal
 words:
@@ -673,10 +673,10 @@ Migrating old CLI
      - None
      - All logic should be in the scripts
 
-Continous Integration
-=====================
+Continuous Integration
+======================
 
-VyOS makes use of Jenkins_ as our Continous Integration (CI) service. Our CI
+VyOS makes use of Jenkins_ as our Continuous Integration (CI) service. Our CI
 server is publicly accessible here: https://ci.vyos.net. You can get a brief
 overview of all required components shipped in a VyOS ISO.
 
@@ -687,7 +687,7 @@ but instead of building it from source on every run, we rather always fetch a
 fresh copy (if needed) from Dockerhub_.
 
 Each module is build on demand if a new commit on the branch in question is
-found. After a successfull run the resulting Debian Package(s) will be deployed
+found. After a successful run the resulting Debian Package(s) will be deployed
 to our Debian repository which is used during build time. It is located here:
 http://dev.packages.vyos.net/repositories/.
 
diff --git a/docs/firewall.rst b/docs/firewall.rst
index f6967850..9426b87d 100644
--- a/docs/firewall.rst
+++ b/docs/firewall.rst
@@ -123,13 +123,13 @@ With the firewall you can set rules to accept, drop or reject ICMP in, out or lo
 
   set firewall all-ping enable
 
-When the command above is set, VyOS will answer every ICMP echo request addressed to itself, but that will only happen if no other rule is applied droping or rejecting local echo requests. In case of conflict, VyOS will not answer ICMP echo requests.
+When the command above is set, VyOS will answer every ICMP echo request addressed to itself, but that will only happen if no other rule is applied dropping or rejecting local echo requests. In case of conflict, VyOS will not answer ICMP echo requests.
 
 .. code-block:: none
 
   set firewall all-ping disable
 
-When the comand above is set, VyOS will answer no ICMP echo request addressed to itself at all, no matter where it comes from or whether more specific rules are being applied to accept them.
+When the command above is set, VyOS will answer no ICMP echo request addressed to itself at all, no matter where it comes from or whether more specific rules are being applied to accept them.
 
 Example Partial Config
 ----------------------
diff --git a/docs/history.rst b/docs/history.rst
index 25affaf8..9a13e2b3 100644
--- a/docs/history.rst
+++ b/docs/history.rst
@@ -39,7 +39,7 @@ How is VyOS different from any other router distributions and platform?
 - DHCP, TFTP, mDNS repeater, broadcast relay and DNS forwarding support
 - Both IPv4 and IPv6 support
 - Runs on physical and virtual platforms alike: small x86 boards, big servers,
-  KVM, Xen, VMWare, Hyper-V, and more
+  KVM, Xen, VMware, Hyper-V, and more
 - Completely free and open source, with documented internal APIs and build
   procedures
 - Community driven. Patches are welcome and all code, bugs, and nightly builds
diff --git a/docs/image-mgmt.rst b/docs/image-mgmt.rst
index 595872de..9b2da077 100644
--- a/docs/image-mgmt.rst
+++ b/docs/image-mgmt.rst
@@ -51,7 +51,7 @@ configured to be the default (:opcmd:`set system image default-boot`).
 .. opcmd:: delete system image [image-name]
 
    Delete no longer needed images from the system. You can specify an optional
-   image name to delete, the image name can be retrived via a list of available
+   image name to delete, the image name can be retrieved via a list of available
    images can be shown using the :opcmd:`show system image`.
 
    .. code-block:: none
diff --git a/docs/install.rst b/docs/install.rst
index 0f6f0f23..dbf426ec 100644
--- a/docs/install.rst
+++ b/docs/install.rst
@@ -64,7 +64,7 @@ distributions it is installed by default as package managers use it to verify
 package signatures. If not pre-installed, it will need to be downloaded and
 installed.
 
-The offical VyOS public key can be retrieved in a number of ways. Skip to
+The official VyOS public key can be retrieved in a number of ways. Skip to
 :ref:`gpg-verification` if the key is already present.
 
 It can also be retrieved directly from a key server:
@@ -158,7 +158,7 @@ downloaded.
    downloaded VyOS image. That small *.asc* file is the signature for the
    associated image.
 
-Finally, verify the authencity of the downloaded image:
+Finally, verify the authenticity of the downloaded image:
 
 .. code-block:: none
 
@@ -274,7 +274,7 @@ method which allows deploying VyOS through the network.
 
 * :ref:`dhcp-server`
 * :ref:`tftp-server`
-* Webserver (HTTP) - optional, but we will use it to speed up intallation
+* Webserver (HTTP) - optional, but we will use it to speed up installation
 * VyOS ISO image to be installed (do not use images prior to VyOS 1.2.3)
 * ``pxelinux.0``, ``ldlinux.c32`` from SYSLINUX_
   (https://mirrors.edge.kernel.org/pub/linux/utils/boot/syslinux/)
diff --git a/docs/interfaces/dummy.rst b/docs/interfaces/dummy.rst
index 4627d1dc..e452ae73 100644
--- a/docs/interfaces/dummy.rst
+++ b/docs/interfaces/dummy.rst
@@ -13,8 +13,8 @@ you can have as many as you want.
 
 .. hint:: A Dummy interface is always up, thus it could be used for
    management traffic or as source/destination for and :abbr:`IGP (Interior
-   Gateway Protocol)` like :ref:`bgp` so your internal BGP link is not dependant
-   on physical link states and multiple routes can be choosen to the
+   Gateway Protocol)` like :ref:`bgp` so your internal BGP link is not dependent
+   on physical link states and multiple routes can be chosen to the
    destination. A :ref:`dummy-interface` Interface should always be preferred
    over a :ref:`loopback-interface` interface.
 
diff --git a/docs/interfaces/loopback.rst b/docs/interfaces/loopback.rst
index f7519631..e15062cf 100644
--- a/docs/interfaces/loopback.rst
+++ b/docs/interfaces/loopback.rst
@@ -14,8 +14,8 @@ services on your local machine.
 
 .. hint:: A lookback interface is always up, thus it could be used for
    management traffic or as source/destination for and :abbr:`IGP (Interior
-   Gateway Protocol)` like :ref:`bgp` so your internal BGP link is not dependant
-   on physical link states and multiple routes can be choosen to the
+   Gateway Protocol)` like :ref:`bgp` so your internal BGP link is not dependent
+   on physical link states and multiple routes can be chosen to the
    destination. A :ref:`dummy-interface` Interface should always be preferred
    over a :ref:`loopback-interface` interface.
 
diff --git a/docs/interfaces/vxlan.rst b/docs/interfaces/vxlan.rst
index 67dab820..409131e1 100644
--- a/docs/interfaces/vxlan.rst
+++ b/docs/interfaces/vxlan.rst
@@ -31,7 +31,7 @@ may be blocked by the hypervisor.
 
 .. note:: As VyOS is based on Linux and there was no official IANA port assigned
    for VXLAN, VyOS uses a default port of 8472. You can change the port on a
-   per VXLAN interface basis to get it working accross multiple vendors.
+   per VXLAN interface basis to get it working across multiple vendors.
 
 Configuration
 =============
diff --git a/docs/interfaces/wireless.rst b/docs/interfaces/wireless.rst
index 9e3c6cf5..ea766af2 100644
--- a/docs/interfaces/wireless.rst
+++ b/docs/interfaces/wireless.rst
@@ -23,7 +23,7 @@ added the configuration tree, specifying any detected settings (for example,
 its MAC address) and configured to run in monitor mode.
 
 To be able to use the wireless interfaces you will first need to set a
-regulatory domain with the country code of your locaion.
+regulatory domain with the country code of your location.
 
 .. cfgcmd:: set system wifi-regulatory-domain DE
 
@@ -34,7 +34,7 @@ Configuring Access-Point
 ^^^^^^^^^^^^^^^^^^^^^^^^
 
 The following example creates a WAP. When configuring multiple WAP interfaces,
-you must specify unique IP addresses, channels, Network IDs commonly refered
+you must specify unique IP addresses, channels, Network IDs commonly referred
 to as :abbr:`SSID (Service Set Identifier)`, and MAC addresses.
 
 The WAP in this example has the following characteristics:
@@ -281,8 +281,8 @@ The wireless interface identifier can range from wlan0 to wlan999.
 
 .. opcmd:: show interfaces wireless <wlanX> scan
 
-This command is used to retrive information about WAP within the range of your
-wireless interface. This command is usefull on wireless interfaces configured
+This command is used to retrieve information about WAP within the range of your
+wireless interface. This command is useful on wireless interfaces configured
 in station mode.
 
 .. note:: Scanning is not supported on all wireless drivers and wireless
diff --git a/docs/load-balancing.rst b/docs/load-balancing.rst
index 092161f4..07c18217 100644
--- a/docs/load-balancing.rst
+++ b/docs/load-balancing.rst
@@ -13,7 +13,7 @@ In a minimal, configuration the following must be provided:
  * a interface with a nexthop
  * one rule with a LAN (inbound-interface) and the WAN (interface).
 
-lets assume we have two dhcp WAN interfaces and one LAN (eth2)
+Let's assume we have two DHCP WAN interfaces and one LAN (eth2):
 
 .. code-block:: none
 
diff --git a/docs/nat.rst b/docs/nat.rst
index 9607be3d..ed48adf9 100644
--- a/docs/nat.rst
+++ b/docs/nat.rst
@@ -94,10 +94,10 @@ rewritten to address the internal (private) host.
 Bidirectional NAT
 ^^^^^^^^^^^^^^^^^
 
-This is a common szenario where both :ref:`source-nat` and
+This is a common scenario where both :ref:`source-nat` and
 :ref:`destination-nat` are configured at the same time. It's commonly used then
 internal (private) hosts need to establish a connection with external resources
-and external systems need to acces sinternal (private) resources.
+and external systems need to access internal (private) resources.
 
 NAT, Routing, Firewall Interaction
 ----------------------------------
@@ -109,7 +109,7 @@ NAT Ruleset
 -----------
 
 :abbr:`NAT (Network Address Translation)` is configured entirely on a series
-of so called `rules`. Rules are numbered and evaluated by the underlaying OS
+of so called `rules`. Rules are numbered and evaluated by the underlying OS
 in numerical order! The rule numbers can be changes by utilizing the
 :cfgcmd:`rename` and :cfgcmd:`copy` commands.
 
@@ -145,7 +145,7 @@ rules applied. Five different filters can be applied within a NAT rule
     set nat source rule 20 outbound-interface eth0
 
 * **inbound-interface** - applicable only to :ref:`destination-nat`. It
-  configures the interface which is used for the inside traffic the the
+  configures the interface which is used for the inside traffic the
   translation rule applies to.
 
   Example:
@@ -205,7 +205,7 @@ Address Conversion
 ------------------
 
 Every NAT rule has a translation command defined. The address defined for the
-translation is the addrass used when the address information in a packet is
+translation is the address used when the address information in a packet is
 replaced.
 
 Source Address
@@ -358,7 +358,7 @@ Example:
 * Redirect Microsoft RDP traffic from the internal (LAN, private) network via
   :ref:`destination-nat` in rule 110 to the internal, private host 192.0.2.40.
   We also need a :ref:`source-nat` rule 110 for the reverse path of the traffic.
-  The internal network 192.0.2.0/24 is reachable via interfache `eth0.10`.
+  The internal network 192.0.2.0/24 is reachable via interface `eth0.10`.
 
 .. code-block:: none
 
diff --git a/docs/routing/arp.rst b/docs/routing/arp.rst
index 70d83503..1587fbbe 100644
--- a/docs/routing/arp.rst
+++ b/docs/routing/arp.rst
@@ -29,7 +29,7 @@ Operation
 
 .. opcmd:: show protocols static arp
 
-   Display all known ARP table entries spanning accross all interfaces
+   Display all known ARP table entries spanning across all interfaces
 
 .. code-block:: none
 
@@ -50,4 +50,4 @@ Operation
   10.1.1.1                 ether   00:53:00:de:23:2e   C              eth1
   10.1.1.100               ether   00:53:00:de:23:aa   CM             eth1
 
-.. _ARP: https://en.wikipedia.org/wiki/Address_Resolution_Protocol
\ No newline at end of file
+.. _ARP: https://en.wikipedia.org/wiki/Address_Resolution_Protocol
diff --git a/docs/routing/bgp.rst b/docs/routing/bgp.rst
index 41be5c6c..f1c183dc 100644
--- a/docs/routing/bgp.rst
+++ b/docs/routing/bgp.rst
@@ -177,7 +177,7 @@ Route Selection
 .. cfgcmd:: set protocols bgp <asn> parameters bestpath as-path confed
 
    This command specifies that the length of confederation path sets and
-   sequences should should be taken into account during the BGP best path
+   sequences should be taken into account during the BGP best path
    decision process.
 
 .. cfgcmd:: set protocols bgp <asn> parameters bestpath as-path multipath-relax
diff --git a/docs/services/conntrack.rst b/docs/services/conntrack.rst
index 0ee6eb16..e56bf076 100644
--- a/docs/services/conntrack.rst
+++ b/docs/services/conntrack.rst
@@ -58,7 +58,7 @@ Configuration
 
 Example
 ^^^^^^^
-The next exemple is a simple configuration of conntrack-sync.
+The next example is a simple configuration of conntrack-sync.
 
 
 .. figure:: /_static/images/service_conntrack_sync-schema.png
@@ -117,7 +117,7 @@ If you are using VRRP, you need to define a VRRP sync-group, and use ``vrrp sync
   set service conntrack-sync failover-mechanism vrrp sync-group 'syncgrp'
 
 
-On the active router, you should have informations in the internal-cache of
+On the active router, you should have information in the internal-cache of
 conntrack-sync. The same current active connections number should be shown in
 the external-cache of the standby router
 
diff --git a/docs/services/dhcp.rst b/docs/services/dhcp.rst
index 23dbabf9..5c7fad9e 100644
--- a/docs/services/dhcp.rst
+++ b/docs/services/dhcp.rst
@@ -291,7 +291,7 @@ Raw parameters can be passed to shared-network-name, subnet and static-mapping:
 These parameters are passed as-is to isc-dhcp's dhcpd.conf under the
 configuration node they are defined in. They are not validated so an error in
 the raw parameters won't be caught by vyos's scripts and will cause dhcpd to
-fail to start. Always verify that the parameters are correct before commiting
+fail to start. Always verify that the parameters are correct before committing
 the configuration. Refer to isc-dhcp's dhcpd.conf manual for more information:
 https://kb.isc.org/docs/isc-dhcp-44-manual-pages-dhcpdconf
 
diff --git a/docs/services/dynamic-dns.rst b/docs/services/dynamic-dns.rst
index 3842c1c4..f526009f 100644
--- a/docs/services/dynamic-dns.rst
+++ b/docs/services/dynamic-dns.rst
@@ -34,7 +34,7 @@ Configuration
 .. cfgcmd:: set service dns dynamic interface <interface> rfc2136 <service-name> server <server>
 
    Configure the DNS `<server>` IP/FQDN used when updating this dynamic
-   assignemnt.
+   assignment.
 
 .. cfgcmd:: set service dns dynamic interface <interface> rfc2136 <service-name> zone <zone>
 
@@ -124,7 +124,7 @@ hostnames, protocol and server.
 .. cfgcmd:: set service dns dynamic interface <interface> service <service> server <server>
 
    When a ``custom`` DynDNS provider is used the `<server>` where update
-   requests are beeing sent to must be specified.
+   requests are being sent to must be specified.
 
 Example:
 ^^^^^^^^
diff --git a/docs/services/udp-broadcast-relay.rst b/docs/services/udp-broadcast-relay.rst
index f9e1b03e..df48bfd6 100644
--- a/docs/services/udp-broadcast-relay.rst
+++ b/docs/services/udp-broadcast-relay.rst
@@ -4,9 +4,9 @@
 UDP Broadcast Relay
 ###################
 
-Certain vendors use broadcasts to identify their equipemnt within one ethernet
+Certain vendors use broadcasts to identify their equipment within one ethernet
 segment. Unfortunately if you split your network with multiple VLANs you loose
-the ability of identifying your equiment.
+the ability of identifying your equipment.
 
 This is where "UDP broadcast relay" comes into play! It will forward received
 broadcasts to other configured networks.
@@ -20,7 +20,7 @@ Configuration
 .. cfgcmd:: set service broadcast-relay id <n> description <description>
 
    A description can be added for each and every unique relay ID. This is
-   usefull to distinguish between multiple different ports/appliactions.
+   useful to distinguish between multiple different ports/appliactions.
 
 .. cfgcmd:: set service broadcast-relay id <n> interface <interface>
 
diff --git a/docs/services/webproxy.rst b/docs/services/webproxy.rst
index 20e1eb73..654e73f2 100644
--- a/docs/services/webproxy.rst
+++ b/docs/services/webproxy.rst
@@ -24,7 +24,7 @@ Configuration
   # Enable proxy service
   set service webproxy listen-address 192.168.0.1
 
-  # By default it will listen to port 3128. If you wan't something else you have to define that.
+  # By default it will listen to port 3128. If you want something else you have to define that.
   set service webproxy listen-address 192.168.0.1 port 2050
 
   # By default the transparent proxy on that interface is enabled. To disable that you simply
@@ -43,7 +43,7 @@ Options
 Filtering by category
 ^^^^^^^^^^^^^^^^^^^^^
 
-If you wan't to use existing blacklists you have to create/download a database
+If you want to use existing blacklists you have to create/download a database
 first. Otherwise you will not be able to commit the config changes.
 
 .. code-block:: none
diff --git a/docs/system/user-management.rst b/docs/system/user-management.rst
index bb9a6e90..c56a22a1 100644
--- a/docs/system/user-management.rst
+++ b/docs/system/user-management.rst
@@ -28,7 +28,7 @@ Local
 
 .. cfgcmd:: set system login user <name> authentication encrypted-password <password>
 
-   Setup encrypted password for given username. This is usefull for
+   Setup encrypted password for given username. This is useful for
    transferring a hashed password from system to system.
 
 .. cfgcmd:: set system login user <name> group <group>
@@ -127,7 +127,7 @@ Configuration
 
    Setup the `<timeout>` in seconds when querying the RADIUS server.
 
-.. hint:: If you wan't to have admin users to authenticate via RADIUS it is
+.. hint:: If you want to have admin users to authenticate via RADIUS it is
    essential to sent the ``Cisco-AV-Pair shell:priv-lvl=15`` attribute. Without
    the attribute you will only get regular, non privilegued, system users.
 
diff --git a/docs/troubleshooting.rst b/docs/troubleshooting.rst
index b3b8ff3d..450dcdd9 100644
--- a/docs/troubleshooting.rst
+++ b/docs/troubleshooting.rst
@@ -164,11 +164,11 @@ The `unlimited` keyword is used to specify that an unlimited number of packets
 can be captured (by default, 1,000 packets are captured and you're returned to
 the VyOS command prompt).
 
-Interface Bandwith
-^^^^^^^^^^^^^^^^^^
+Interface Bandwidth
+^^^^^^^^^^^^^^^^^^^
 
-to take a quick view on the used bandwith of an interface use the ``monitor
-bandwith`` command
+to take a quick view on the used bandwidth of an interface use the ``monitor
+bandwidth`` command
 
 .. code-block:: none
 
@@ -199,7 +199,7 @@ show the following:
 Interface performance
 ^^^^^^^^^^^^^^^^^^^^^
 
-To take a look on the network bandwith between two nodes, the ``monitor
+To take a look on the network bandwidth between two nodes, the ``monitor
 bandwidth-test`` command is used to run iperf.
 
 .. code-block:: none
@@ -209,8 +209,8 @@ bandwidth-test`` command is used to run iperf.
     accept        Wait for bandwidth test connections (port TCP/5001)
     initiate      Initiate a bandwidth test
 
-* The ``accept`` command open a listen iperf server on TCP Port 5001
-* The ``initiate`` command conncet to this server.
+* The ``accept`` command opens a listening iperf server on TCP Port 5001
+* The ``initiate`` command connects to that server to perform the test.
 
 .. code-block:: none
 
diff --git a/docs/vpn/dmvpn.rst b/docs/vpn/dmvpn.rst
index 344d5c3f..c4f53a72 100644
--- a/docs/vpn/dmvpn.rst
+++ b/docs/vpn/dmvpn.rst
@@ -164,7 +164,7 @@ HUB Example Configuration:
 HUB on AWS Configuration Specifics
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
-Setting this up on AWS will require a "Custom Protocol Rule" for protocol number "47" (GRE) Allow Rule in TWO places. Firstly on the VPC Network ACL, and secondly on the security group network ACL attached to the EC2 instance. This has been tested as working for the offical AMI image on the AWS Marketplace. (Locate the correct VPC and security group by navigating through the details pane below your EC2 instance in the AWS console)
+Setting this up on AWS will require a "Custom Protocol Rule" for protocol number "47" (GRE) Allow Rule in TWO places. Firstly on the VPC Network ACL, and secondly on the security group network ACL attached to the EC2 instance. This has been tested as working for the official AMI image on the AWS Marketplace. (Locate the correct VPC and security group by navigating through the details pane below your EC2 instance in the AWS console)
 
 SPOKE Configuration
 ^^^^^^^^^^^^^^^^^^^
diff --git a/docs/vpn/gre-ipsec.rst b/docs/vpn/gre-ipsec.rst
index 38849f67..6d4bf1d0 100644
--- a/docs/vpn/gre-ipsec.rst
+++ b/docs/vpn/gre-ipsec.rst
@@ -25,7 +25,7 @@ what needs to be changed to make it work with a different protocol. We assume
 that IPsec will use pre-shared secret authentication and will use AES128/SHA1
 for the cipher and hash. Adjust this as necessary.
 
-.. NOTE:: VMWare users should ensure that VMXNET3 adapters used, e1000 adapters
+.. NOTE:: VMware users should ensure that VMXNET3 adapters used, e1000 adapters
    have known issue with GRE processing
 
 IPsec policy matching GRE
diff --git a/docs/vpn/l2tp.rst b/docs/vpn/l2tp.rst
index 768e5acd..71ab1c46 100644
--- a/docs/vpn/l2tp.rst
+++ b/docs/vpn/l2tp.rst
@@ -141,7 +141,7 @@ RADIUS authentication
 ======================
 
 To enable RADIUS based authentication, the authentication mode needs to be
-changed withing the configuration. Previous settings like the local users, still
+changed within the configuration. Previous settings like the local users, still
 exists within the configuration, however they are not used if the mode has been
 changed from local to radius. Once changed back to local, it will use all local
 accounts again.