rearange changelog, cli, contributing

20 files changed, 498 insertions, 102 deletions

diff --git a/docs/automation/index.rst b/docs/automation/index.rst
new file mode 100644
index 00000000..a3df9bc0
--- /dev/null
+++ b/docs/automation/index.rst
@@ -0,0 +1,9 @@
+###############
+VyOS Automation
+###############
+
+
+  * Ansible
+  * Saltstack
+  * HTTP-API
+  * startup scripts
\ No newline at end of file
diff --git a/docs/changelog/1.2.1.rst b/docs/changelog/1.2.1.rst
new file mode 100644
index 00000000..4f22dd0a
--- /dev/null
+++ b/docs/changelog/1.2.1.rst
@@ -0,0 +1,52 @@
+1.2.1
+=====
+
+VyOS 1.2.1 is a maintenance release made in April 2019.
+
+Resolved issues
+---------------
+
+* Package updates: kernel 4.19.32, open-vm-tools 10.3, latest Intel NIC drivers
+* :vytask:`T1326` The kernel now includes drivers for various USB serial
+  adapters, which allows people to add a serial console to a machine without
+  onboard RS232, or connect to something else from the router
+* The collection of network card firmware is now much more extensive
+* :vytask:`T1271` VRRP now correctly uses a virtual rather than physical MAC
+  addresses in the RFC-compliant mode
+* :vytask:`T1330` DHCP WPAD URL option works correctly again
+* :vytask:`T1312` Many to many NAT rules now can use source/destination and
+  translation networks of non-matching size. If 1:1 network bits translation is
+  desired, it's now users responsibility to check if prefix length matches.
+* :vytask:`T1290` IPv6 network prefix translation is fixed
+* :vytask:`T1308` Non-alphanumeric characters such as ``>`` can now be safely
+  used in PPPoE passwords
+* :vytask:`T1305` ``show | commands`` no longer fails when a config section ends
+  with a leaf node such as ``timezone`` in ``show system | commands``
+* :vytask:`T1235` ``show | commands`` correctly works in config mode now
+* :vytask:`T1298` VTI is now compatible with the DHCP-interface IPsec option
+* :vytask:`T1277` ``show dhcp server statistics`` command was broken in latest
+  Crux
+* :vytask:`T1261` An issue with TFTP server refusing to listen on addresses
+  other than loopback was fixed
+* :vytask:`T1224` Template issue that might cause UDP broadcast relay fail to
+  start is fixed
+* :vytask:`T1067` VXLAN value validation is improved
+* :vytask:`T1211` Blank hostnames in DHCP updates no longer can crash DNS
+  forwarding
+* :vytask:`T1322` Correct configuration is now generated for DHCPv6 relays with
+  more than one upstream interface
+* :vytask:`T1234` ``relay-agents-packets`` option works correctly now
+* :vytask:`T1231` Dynamic DNS data is now cleaned on configuration change
+* :vytask:`T1282` Remote Syslog can now use a fully qualified domain name
+* :vytask:`T1279` ACPI power off works again
+* :vytask:`T1247` Negation in WAN load balancing rules works again
+* :vytask:`T1218` FRR staticd now starts on boot correctly
+* :vytask:`T1296` The installer now correctly detects SD card devices
+* :vytask:`T1225` Wireguard peers can be disabled now
+* :vytask:`T1217` The issue with Wireguard interfaces impossible to delete
+  is fixed
+* :vytask:`T1160` Unintended IPv6 access is fixed in SNMP configuration
+* :vytask:`T1060` It's now possible to exclude hosts from the transparent
+  web proxy
+* :vytask:`T484` An issue with rules impossible to delete from the zone-based
+  firewall is fixed
\ No newline at end of file
diff --git a/docs/changelog/1.2.2.rst b/docs/changelog/1.2.2.rst
new file mode 100644
index 00000000..17ba941f
--- /dev/null
+++ b/docs/changelog/1.2.2.rst
@@ -0,0 +1,46 @@
+1.2.2
+=====
+
+1.2.2 is a maintenance release made in July 2019.
+
+New features
+------------
+
+* Options for per-interface MSS clamping.
+* BGP extended next-hop capability
+* Relaxed BGP multipath option
+* Internal and external options for "remote-as" (accept any AS as long as it's
+  the same to this router or different, respectively)
+* "Unnumbered" (interface-based) BGP peers
+* BGP no-prepend option
+* Additive BGP community option
+* OSPFv3 network type option
+* Custom arguments for VRRP scripts
+* A script for querying values from config files
+
+Resolved issues
+---------------
+
+* Linux kernel 4.19.54, including a fix for the TCP SACK vulnerability
+* :vytask:`T1371` VRRP health-check scripts now can use arguments
+* :vytask:`T1497` DNS server addresses coming from a DHCP server are now
+  correctly propagated to resolv.conf
+* :vytask:`T1469` Domain-specific name servers in DNS forwarding are now used
+  for recursive queries
+* :vytask:`T1433` ``run show dhcpv6 server leases`` now display leases correctly
+* :vytask:`T1461` Deleting ``firewall options`` node no longer causes errors
+* :vytask:`T1458` Correct hostname is sent to remote syslog again
+* :vytask:`T1438` Board serial number from DMI is correctly displayed in
+  ``show version``
+* :vytask:`T1358`, :vytask:`T1355`, :vytask:`T1294` Multiple corrections in
+  remote syslog config
+* :vytask:`T1255` Fixed missing newline in ``/etc/hosts``
+* :vytask:`T1174` ``system domain-name`` is correctly included in
+  ``/etc/resolv.conf``
+* :vytask:`T1465` Fixed priority inversion in ``interfaces vti vtiX ip``
+  settings
+* :vytask:`T1446` Fixed errors when installing with RAID1 on UEFI machines
+* :vytask:`T1387` Fixed an error on disabling an interfaces that has no address
+* :vytask:`T1367` Fixed deleting VLAN interface with non-default MTU
+* :vytask:`T1505` vyos.config ``return_effective_values()`` function now
+  correctly returns a list rather than a string
\ No newline at end of file
diff --git a/docs/changelog/1.2.3.rst b/docs/changelog/1.2.3.rst
new file mode 100644
index 00000000..653beec1
--- /dev/null
+++ b/docs/changelog/1.2.3.rst
@@ -0,0 +1,62 @@
+1.2.3
+=====
+
+1.2.3 is a maintenance and feature backport release made in September 2019.
+
+New features
+------------
+
+* HTTP API
+* :vytask:`T1524` "set service dns forwarding allow-from <IPv4 net|IPv6 net>"
+  option for limiting queries to specific client networks
+* :vytask:`T1503` Functions for checking if a commit is in progress
+* :vytask:`T1543` "set system contig-mangement commit-archive source-address"
+  option
+* :vytask:`T1554` Intel NIC drivers now support receive side scaling and
+  multiqueue
+
+Resolved issues
+---------------
+
+* :vytask:`T1209` OSPF max-metric values over 100 no longer causes commit
+  errors
+* :vytask:`T1333` Fixes issue with DNS forwarding not performing recursive
+  lookups on domain specific forwarders
+* :vytask:`T1362` Special characters in VRRP passwords are handled correctly
+* :vytask:`T1377` BGP weight is applied properly
+* :vytask:`T1420` Fixed permission for log files
+* :vytask:`T1425` Wireguard interfaces now support /31 addresses
+* :vytask:`T1428` Wireguard correctly handles firewall marks
+* :vytask:`T1439` DHCPv6 static mappings now work correctly
+* :vytask:`T1450` Flood ping commands now works correctly
+* :vytask:`T1460` Op mode "show firewall" commands now support counters longer
+  than 8 digits (T1460)
+* :vytask:`T1465` Fixed priority inversion in VTI commands
+* :vytask:`T1468` Fixed remote-as check in the BGP route-reflector-client option
+* :vytask:`T1472` It's now possible to re-create VRRP groups with RFC
+  compatibility mode enabled
+* :vytask:`T1527` Fixed a typo in DHCPv6 server help strings
+* :vytask:`T1529` Unnumbered BGP peers now support VLAN interfaces
+* :vytask:`T1530` Fixed "set system syslog global archive file" command
+* :vytask:`T1531` Multiple fixes in cluster configuration scripts
+* :vytask:`T1537` Fixed missing help text for "service dns"
+* :vytask:`T1541` Fixed input validation in DHCPv6 relay options
+* :vytask:`T1551` It's now possible to create a QinQ interface and a firewall
+  assigned to it in one commit
+* :vytask:`T1559` URL filtering now uses correct rule database path and works
+  again
+* :vytask:`T1579` "show log vpn ipsec" command works again
+* :vytask:`T1576` "show arp interface <intf>" command works again
+* :vytask:`T1605` Fixed regression in L2TP/IPsec server
+* :vytask:`T1613` Netflow/sFlow captures IPv6 traffic correctly
+* :vytask:`T1616` "renew dhcpv6" command now works from op mode
+* :vytask:`T1642` BGP remove-private-as option iBGP vs eBGP check works
+  correctly now
+* :vytask:`T1540`, :vytask:`T1360`, :vytask:`T1264`, :vytask:`T1623` Multiple
+  improvements in name servers and hosts configuration handling
+
+Internals
+---------
+
+``/etc/resolv.conf`` and ``/etc/hosts`` files are now managed by the
+*vyos-hostsd* service that listens on a ZMQ socket for update messages.
\ No newline at end of file
diff --git a/docs/changelog/1.2.4.rst b/docs/changelog/1.2.4.rst
new file mode 100644
index 00000000..397c9bb9
--- /dev/null
+++ b/docs/changelog/1.2.4.rst
@@ -0,0 +1,65 @@
+1.2.4
+=====
+
+1.2.4 is a maintenance release made in December 2019.
+
+Resolved issues
+---------------
+
+* :vytask:`T258` Can not configure wan load-balancing on vyos-1.2
+* :vytask:`T818` SNMP v3 - remove required engineid from user node
+* :vytask:`T1030` Upgrade ddclient from 3.8.2 to 3.9.0 (support Cloudflare API v4)
+* :vytask:`T1183` BFD Support via FRR
+* :vytask:`T1299` Allow SNMPd to be extended with custom scripts
+* :vytask:`T1351` accel-pppoe adding CIDR based IP pool option
+* :vytask:`T1391` In route-map set community additive
+* :vytask:`T1394` syslog systemd and host_name.py race condition
+* :vytask:`T1401` Copying files with the FTP protocol fails if the password contains special characters
+* :vytask:`T1421` OpenVPN client push-route stopped working, needs added quotes to fix
+* :vytask:`T1430` Add options for custom DHCP client-id and hostname
+* :vytask:`T1447` Python subprocess called without import in host_name.py
+* :vytask:`T1470` improve output of "show dhcpv6 server leases"
+* :vytask:`T1485` Enable 'AdvIntervalOpt' option in for radvd.conf
+* :vytask:`T1496` Separate rolling release and LTS kernel builds
+* :vytask:`T1560` "set load-balancing wan rule 0" causes segfault and prevents load balancing from starting
+* :vytask:`T1568` strip-private command improvement for additional masking of IPv6 and MAC address
+* :vytask:`T1578` completion offers "show table", but show table does not exist
+* :vytask:`T1593` Support ip6gre
+* :vytask:`T1597` /usr/sbin/rsyslogd after deleting "system syslog"
+* :vytask:`T1638` vyos-hostsd not setting system domain name
+* :vytask:`T1678` hostfile-update missing line feed
+* :vytask:`T1694` NTPd: Do not listen on all interfaces by default
+* :vytask:`T1701` Delete domain-name and domain-search won't work
+* :vytask:`T1705` High CPU usage by bgpd when snmp is active
+* :vytask:`T1707` DHCP static mapping and exclude address not working
+* :vytask:`T1708` Update Rolling Release Kernel to 4.19.76
+* :vytask:`T1709` Update WireGuard to 0.0.20190913
+* :vytask:`T1716` Update Intel NIC drivers to recent versions
+* :vytask:`T1726` Update Linux Firmware binaries to a more recent version 2019-03-14 -> 2019-10-07
+* :vytask:`T1728` Update Linux Kernel to 4.19.79
+* :vytask:`T1737` SNMP tab completion missing
+* :vytask:`T1738` Copy SNMP configuration from node to node raises exception
+* :vytask:`T1740` Broken OSPFv2 virtual-link authentication
+* :vytask:`T1742` NHRP unable to commit.
+* :vytask:`T1745` dhcp-server commit fails with "DHCP range stop address x must be greater or equal to the range start address y!" when static mapping has same IP as range stop
+* :vytask:`T1749` numeric validator doesn't support multiple ranges
+* :vytask:`T1769` Remove complex SNMPv3 Transport Security Model (TSM)
+* :vytask:`T1772` <regex> constraints in XML are partially broken
+* :vytask:`T1778` Kilobits/Megabits difference in configuration Vyos/FRR
+* :vytask:`T1780` Adding ipsec ike closeaction
+* :vytask:`T1786` disable-dhcp-nameservers is missed in current host_name.py implementation
+* :vytask:`T1788` Intel QAT (QuickAssist Technology ) implementation
+* :vytask:`T1792` Update WireGuard to Debian release 0.0.20191012-1
+* :vytask:`T1800` Update Linux Kernel to v4.19.84
+* :vytask:`T1809` Wireless: SSID scan does not work in AP mode
+* :vytask:`T1811` Upgrade from 1.1.8: Config file migration failed: module=l2tp
+* :vytask:`T1812` DHCP: hostnames of clients not resolving after update v1.2.3 -> 1.2-rolling
+* :vytask:`T1819` Reboot kills SNMPv3 configuration
+* :vytask:`T1822` Priority inversion wireless interface dhcpv6
+* :vytask:`T1825` Improve DHCP configuration error message
+* :vytask:`T1836` import-conf-mode-commands in vyos-1x/scripts fails to create an xml
+* :vytask:`T1839` LLDP shows "VyOS unknown" instead of "VyOS"
+* :vytask:`T1841` PPP ipv6-up.d direcotry missing
+* :vytask:`T1893` igmp-proxy: Do not allow adding unknown interface
+* :vytask:`T1903` Implementation udev predefined interface naming
+* :vytask:`T1904` update eth1 and eth2 link files for the vep4600
\ No newline at end of file
diff --git a/docs/changelog/1.2.5.rst b/docs/changelog/1.2.5.rst
new file mode 100644
index 00000000..231e92f2
--- /dev/null
+++ b/docs/changelog/1.2.5.rst
@@ -0,0 +1,60 @@
+1.2.5
+=====
+
+1.2.5 is a maintenance release made in April 2020.
+
+Resolved issues
+---------------
+
+* :vytask:`1020` OSPF Stops distributing default route after a while
+* :vytask:`1228` pppoe default-route force option not working (Rel 1.2.0-rc11)
+* :vytask:`1301` bgp peer-groups don't work when "no-ipv4-unicast" is enabled.
+* :vytask:`1341` Adding rate-limiter for pppoe server users
+* :vytask:`1376` Incorrect DHCP lease counting
+* :vytask:`1392` Large firewall rulesets cause the system to lose configuration and crash at startup
+* :vytask:`1416` 2 dhcp server run in failover mode can't sync hostname with each other
+* :vytask:`1452` accel-pppoe - add vendor option to shaper
+* :vytask:`1490` BGP configuration (is lost|not applied) when updating 1.1.8 -> 1.2.1
+* :vytask:`1780` Adding ipsec ike closeaction
+* :vytask:`1803` Unbind NTP while it's not requested...
+* :vytask:`1821` "authentication mode radius" has no effect for PPPoE server
+* :vytask:`1827` Increase default gc_thresh
+* :vytask:`1828` Missing completion helper for "set system syslog host 192.0.2.1 facility all protocol"
+* :vytask:`1832` radvd adding feature DNSSL branch.example.com example.com to existing package
+* :vytask:`1837` PPPoE unrecognized option 'replacedefaultroute'
+* :vytask:`1851` wireguard - changing the pubkey on an existing peer seems to destroy the running config.
+* :vytask:`1858` l2tp: Delete depricated outside-nexthop and add gateway-address
+* :vytask:`1864` Lower IPSec DPD timeout lower limit from 10s -> 2s
+* :vytask:`1879` Extend Dynamic DNS XML definition value help strings and validators
+* :vytask:`1881` Execute permissions are removed from custom SNMP scripts at commit time
+* :vytask:`1884` Keeping VRRP transition-script native behaviour and adding stop-script
+* :vytask:`1891` Router announcements broken on boot
+* :vytask:`1900` Enable SNMP for VRRP.
+* :vytask:`1902` Add redistribute non main table in bgp
+* :vytask:`1909` Incorrect behaviour of static routes with overlapping networks
+* :vytask:`1913` "system ipv6 blacklist" command has no effect
+* :vytask:`1914` IPv6 multipath hash policy does not apply
+* :vytask:`1917` Update WireGuard to Debian release 0.0.20191219-1
+* :vytask:`1934` Change default hostname when deploy from OVA without params.
+* :vytask:`1935` NIC identification and usage problem in Hyper-V environments
+* :vytask:`1936` pppoe-server CLI control features
+* :vytask:`1964` SNMP Script-extensions allows names with spaces, but commit fails
+* :vytask:`1967` BGP parameter "enforce-first-as" does not work anymore
+* :vytask:`1970` Correct adding interfaces on boot
+* :vytask:`1971` Missing modules in initrd.img for PXE boot
+* :vytask:`1998` Update FRR to 7.3
+* :vytask:`2001` Error when router reboot
+* :vytask:`2032` Monitor bandwidth bits
+* :vytask:`2059` Set source-validation on bond vif don't work
+* :vytask:`2066` PPPoE interface can be created multiple times - last wins
+* :vytask:`2069` PPPoE-client does not works with service-name option
+* :vytask:`2077` ISO build from crux branch is failing
+* :vytask:`2079` Update Linux Kernel to v4.19.106
+* :vytask:`2087` Add maxfail 0 option to pppoe configuration.
+* :vytask:`2100` BGP route adverisement wih checks rib
+* :vytask:`2120` "reset vpn ipsec-peer" doesn't work with named peers
+* :vytask:`2197` Cant add vif-s interface into a bridge
+* :vytask:`2228` WireGuard does not allow ports < 1024 to be used
+* :vytask:`2252` HTTP API add system image can return '504 Gateway Time-out'
+* :vytask:`2272` Set system flow-accounting disable-imt has syntax error
+* :vytask:`2276` PPPoE server vulnerability
\ No newline at end of file
diff --git a/docs/changelog/index.rst b/docs/changelog/index.rst
new file mode 100644
index 00000000..26262932
--- /dev/null
+++ b/docs/changelog/index.rst
@@ -0,0 +1,14 @@
+#########
+Changelog
+#########
+
+
+.. toctree::
+   :maxdepth: 1
+   :includehidden:
+
+   1.2.5
+   1.2.4
+   1.2.3
+   1.2.2
+   1.2.1
diff --git a/docs/cli.rst b/docs/cli.rst
index 4694cc5d..b138b18b 100644
--- a/docs/cli.rst
+++ b/docs/cli.rst
@@ -1,14 +1,14 @@
 .. _cli:
 
-###
-CLI
-###
+#####################
+Comand Line Interface
+#####################
 
 The VyOS :abbr:`CLI (Command-Line Interface)` comprises an operational and a
 configuration mode.
 
 Operational Mode
-================
+################
 
 Operational mode allows for commands to perform operational system tasks and
 view system and service status, while configuration mode allows for the
@@ -73,7 +73,7 @@ When viewing in page mode the following commands are available:
    in the event that the output has lines which exceed the terminal size.
 
 Configuration Mode
-==================
+##################
 
 The list of all operational level commands is available at
 :ref:`configuration_level_commands`.
diff --git a/docs/contributing/documentation.rst b/docs/contributing/documentation.rst
index e8d1dba5..9dd0c495 100644
--- a/docs/contributing/documentation.rst
+++ b/docs/contributing/documentation.rst
@@ -1,7 +1,8 @@
 .. _documentation:
 
+#############
 Documentation
-=============
+#############
 
 As most software projects we also have a lack in documentation. We encourage
 every VyOS user to help us improve our documentation. This will not only be
@@ -15,7 +16,7 @@ guide how to do so.
    documentation.
 
 Forking Workflow
-----------------
+================
 
 The Forking Workflow is fundamentally different than other popular Git
 workflows. Instead of using a single server-side repository to act as the
@@ -102,17 +103,20 @@ access to the official codebase.
   push origin master``
 
 Style Guide
------------
+===========
 
-Sections
-^^^^^^^^
+Formating and Sphinxmarkup
+--------------------------
+
+TOC Level
+^^^^^^^^^^
 
 We use the following syntax for Headlines.
 
 .. code-block:: none
 
   #####
-  Parts
+  Title
   #####
 
   ********
@@ -159,16 +163,17 @@ render the documentation.
 cfgcmd
 """"""
 
-When documenting CLI commands use the ``.. cfgcmd::`` directive for all
-configuration mode commands. An explanation of the described command should be
-added below this statement.
+When documenting CLI commands use the ``.. cfgcmd::`` directive
+for all configuration mode commands. An explanation of the described command
+should be added below this statement.
+Replace all variable contents with <value> or somthing similar.
 
 With those custom commands it will be possible to render them in a more
 descriptive way in the resulting HTML/PDF manual.
 
 .. code-block:: none
 
-  .. cfgcmd:: set protocols static arp 192.0.2.100 hwaddr 00:53:27:de:23:aa
+  .. cfgcmd:: protocols static arp <ipaddress> hwaddr <macaddress>
 
      This will configure a static ARP entry always resolving `192.0.2.100` to
      `00:53:27:de:23:aa`.
@@ -250,6 +255,70 @@ URL. This is heavily used in the :ref:`release-notes` section.
   * :vytask:`T1605` Fixed regression in L2TP/IPsec server
   * :vytask:`T1613` Netflow/sFlow captures IPv6 traffic correctly
 
+Page content
+------------
+
+The documentation have 3 different types of pages, the same kind of pages must 
+have the same structure to achieve a recognition factor.
+
+For all *.rst files must follow the same TOC Level syntax and have to start with
+
+.. code-block::
+
+   #####
+   Titel
+   #####
+
+Configuration mode pages
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+A configuration mode article covers a specific level of a command.
+The exact level depends on the command.
+
+For example:
+
+  * ``set zone-policy`` is written in ``zone-policy/index.rst``
+  * ``set interfaces ethernet`` is written in ``interfaces/ethernet.rst``
+
+The article starts with a short intruducing about the command or the technologie.
+Include some helpfull links or background informations.
+
+After this a optional section follows. Some commands have requirements like the
+compatible hardware (e.g. Wifi) or some commands you have to set before. For
+example it is recommended to set a route-map before configure bgp.
+
+In the configuration part of the page all possible confiuration options
+should be documented. Use ``.. cfgcmd::`` like described above.
+
+Related Operation command must be documented in the next part of the articel.
+Use ``::opcmd..`` for these commands.
+
+If there some troubleshooting guides releated to the commands. Explain it in the
+next optional part.
+
+Examples:
+
+   * ssh
+   
+
+
+Operation mode pages
+^^^^^^^^^^^^^^^^^^^^
+
+Operation mode commands, which didn't fit in a related configuraton mode command
+must documented in this part of the documentation.
+
+.. todo::
+
+  create structure
+
+
+Anything else
+^^^^^^^^^^^^^
+
+Anything else what is not a configuration or a operation command have no
+predefined structure.
+
 
 .. _Sphinx-doc: https://www.sphinx-doc.org
 .. _reStructuredText: http://www.sphinx-doc.org/en/master/usage/restructuredtext/index.html
diff --git a/docs/contributing/index.rst b/docs/contributing/index.rst
new file mode 100644
index 00000000..c3bb2688
--- /dev/null
+++ b/docs/contributing/index.rst
@@ -0,0 +1,13 @@
+############
+Contributing
+############
+
+.. toctree::
+   :maxdepth: 2
+
+   build-vyos
+   debugging
+   development
+   documentation
+   issues-features
+   upstream-packages
\ No newline at end of file
diff --git a/docs/copyright.rst b/docs/copyright.rst
new file mode 100644
index 00000000..beebc2a2
--- /dev/null
+++ b/docs/copyright.rst
@@ -0,0 +1,19 @@
+################
+Copyright Notice
+################
+
+Copyright (C) 2018-2020 VyOS maintainers and contributors
+
+Permission is granted to make and distribute verbatim copies of this manual
+provided the copyright notice and this permission notice are preserved on all
+copies.
+
+Permission is granted to copy and distribute modified versions of this manual
+under the conditions for verbatim copying, provided that the entire resulting
+derived work is distributed under the terms of a permission notice identical
+to this one.
+
+Permission is granted to copy and distribute translations of this manual into
+another language, under the above conditions for modified versions, except that
+this permission notice may be stated in a translation approved by the VyOS
+maintainers.
\ No newline at end of file
diff --git a/docs/draw.io/pbr_example_1.drawio b/docs/draw.io/pbr_example_1.drawio
deleted file mode 100644
index 0d496572..00000000
--- a/docs/draw.io/pbr_example_1.drawio
+++ /dev/null
@@ -1 +0,0 @@
-<mxfile modified="2019-06-20T09:46:15.910Z" host="www.draw.io" agent="Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/75.0.3770.100 Safari/537.36" etag="pgW5M9QC_GIVY4GNWbyF" version="10.7.9" type="device"><diagram name="Page-1" id="c37626ed-c26b-45fb-9056-f9ebc6bb27b6">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</diagram></mxfile>
\ No newline at end of file
diff --git a/docs/draw.io/vpn_s2s_ikev2.drawio b/docs/draw.io/vpn_s2s_ikev2.drawio
deleted file mode 100644
index b240c191..00000000
--- a/docs/draw.io/vpn_s2s_ikev2.drawio
+++ /dev/null
@@ -1 +0,0 @@
-<mxfile modified="2019-07-18T20:12:29.116Z" host="www.draw.io" agent="Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/75.0.3770.142 Safari/537.36" etag="se-JT0q6YZwCfwyGJaAA" version="10.9.8" type="device"><diagram name="Page-1" id="c37626ed-c26b-45fb-9056-f9ebc6bb27b6">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</diagram></mxfile>
\ No newline at end of file
diff --git a/docs/index.rst b/docs/index.rst
index ab9d3f66..3322bf8d 100644
--- a/docs/index.rst
+++ b/docs/index.rst
@@ -6,102 +6,44 @@ VyOS User Guide
 
 
 .. toctree::
-   :caption: Introduction
-   :name: intro
    :maxdepth: 2
+   :hidden:
+   :caption: FIND CAPTION NAME
 
-   about
-   history
-   install
-   cli
-   quick-start
-
+   introducing/about
+   introducing/history
+   introducing/releases
+   changelog/index
 
 .. toctree::
-   :caption: Basic Configuration
-   :name: basics
    :maxdepth: 2
+   :hidden:
+   :includehidden:
+   :caption: first steps
 
-   configuration-overview
-   interfaces/basic-index
-   system/basic-index
-   image-mgmt
-
-
-.. toctree::
-   :caption: Advanced Configuration
-   :name: advanced
-   :maxdepth: 2
-
-   interfaces/advanced-index
-   system/advanced-index
-   services/index
-   firewall
-   routing/index
-   vrf
-   nat
-   nptv6
-   qos
-   high-availability
-   vpn/index
-   load-balancing
-   command-list-configuration
-
+   installation/index
+   quick-start
+   cli
 
+   
 .. toctree::
-   :caption: System Operation
-   :name: system-operation
    :maxdepth: 2
+   :hidden:
+   :includehidden:
+   :caption: Adminguide
 
-   information
-   troubleshooting
-   command-list-operation
+   configuration/index
+   operation/index
+   automation/index
+   troubleshooting/index
+   configexamples/index
 
 
 .. toctree::
-   :caption: Appendix
-   :name: appendix
    :maxdepth: 2
-
-   appendix/release-notes
-   appendix/examples/index
-   appendix/vyos-on-baremetal
-   appendix/virtual/index
-   appendix/vyos-on-clouds
-   appendix/migrate-from-vyatta
-   appendix/command-scripting
-   appendix/http-api
-
-
-.. toctree::
+   :hidden:
+   :includehidden:
    :caption: Contributing
-   :name: contributing
-   :maxdepth: 2
-
-   contributing/build-vyos
-   contributing/upstream-packages
-   contributing/issues-features
-   contributing/development
-   contributing/debugging
-   contributing/documentation
-
-
-################
-Copyright Notice
-################
-
-Copyright (C) 2018-2020 VyOS maintainers and contributors
-
-Permission is granted to make and distribute verbatim copies of this manual
-provided the copyright notice and this permission notice are preserved on all
-copies.
-
-Permission is granted to copy and distribute modified versions of this manual
-under the conditions for verbatim copying, provided that the entire resulting
-derived work is distributed under the terms of a permission notice identical
-to this one.
 
-Permission is granted to copy and distribute translations of this manual into
-another language, under the above conditions for modified versions, except that
-this permission notice may be stated in a translation approved by the VyOS
-maintainers.
+   contributing/index
+   copyright
diff --git a/docs/installation/index.rst b/docs/installation/index.rst
new file mode 100644
index 00000000..af265121
--- /dev/null
+++ b/docs/installation/index.rst
@@ -0,0 +1,18 @@
+#################################
+Installation and Image Management
+#################################
+
+
+
+.. toctree::
+   :maxdepth: 2
+   :caption: Content
+
+   install
+   iso
+   virtual/index
+   cloud/index
+   update
+   image
+   migrate-from-vyatta
+   ../vyos-on-baremetal
\ No newline at end of file
diff --git a/docs/install.rst b/docs/installation/install.rst
index 11d0fc88..11d0fc88 100644
--- a/docs/install.rst
+++ b/docs/installation/install.rst
diff --git a/docs/about.rst b/docs/introducing/about.rst
index 383c95eb..0411344b 100644
--- a/docs/about.rst
+++ b/docs/introducing/about.rst
@@ -8,7 +8,7 @@ VyOS is an open source network operating system based on Debian GNU/Linux.
 
 VyOS provides a free routing platform that competes directly with other
 commercially available solutions from well known network providers. Because
-VyOS is run on standard amd64, i586 and ARM systems, it can be used
+VyOS is run on standard amd64, i586 and ARM systems, it is able to be used
 as a router and firewall platform for cloud deployments.
 
 We use multiple live versions of our manual hosted thankfully by
@@ -16,7 +16,7 @@ https://readthedocs.org. We will provide one version of the manual for every
 VyOS major version starting with VyOS 1.2 which will receive Long-term support
 (LTS).
 
-The manual version is selected/specified by its Git branch name. You can
+The manual version is selected/specified by it's Git branch name. You can
 switch between versions of the documentation by selecting the appropriate
 branch on the bottom left corner.
 
diff --git a/docs/history.rst b/docs/introducing/history.rst
index 9a13e2b3..9a13e2b3 100644
--- a/docs/history.rst
+++ b/docs/introducing/history.rst
diff --git a/docs/introducing/releases.rst b/docs/introducing/releases.rst
new file mode 100644
index 00000000..6d95c4bc
--- /dev/null
+++ b/docs/introducing/releases.rst
@@ -0,0 +1,29 @@
+.. _release:
+
+########
+Releases
+########
+
+Rolling Release
+###############
+
+rolling rolling
+
+LTS
+###
+
+lts lts lts
+
+
+old LTS
+=======
+
+old LTSLTSLTSLTS
+
+even older LTS
+--------------
+
+even older LTS even older LTS
+even older LTS even older LTS even older LTS even older LTS even older LTS
+
+
diff --git a/docs/troubleshooting.rst b/docs/troubleshooting/index.rst
index 0b3420f4..0b3420f4 100644
--- a/docs/troubleshooting.rst
+++ b/docs/troubleshooting/index.rst