diff options
| -rw-r--r-- | docs/ch05-network-interfaces.rst | 21 |
1 files changed, 16 insertions, 5 deletions
diff --git a/docs/ch05-network-interfaces.rst b/docs/ch05-network-interfaces.rst index 65b7dd60..4b0bdcc8 100644 --- a/docs/ch05-network-interfaces.rst +++ b/docs/ch05-network-interfaces.rst @@ -35,7 +35,10 @@ command. 257276 1890 0 0 0 0 vyos@vyos:~$ -Each interface can be configured with a description and address. +Each interface can be configured with a description and address. Interface +addresses might be a static address like `172.16.51.129/24`, `dhcp` (to +retrieve the actual interface address from a DHCP server) or an IPv6 address +like `2001:db8:1::ffff/64`. .. code-block:: sh @@ -58,6 +61,7 @@ Ethernet interfaces allow for the configuration of speed, duplex, and hw-id .. code-block:: sh set interfaces ethernet eth1 address '192.168.0.1/24' + set interfaces ethernet eth1 address '2001:db8:1::ffff/64' set interfaces ethernet eth1 description 'INSIDE' set interfaces ethernet eth1 duplex 'auto' set interfaces ethernet eth1 speed 'auto' @@ -68,6 +72,7 @@ Resulting in: ethernet eth1 { address 192.168.0.1/24 + address 2001:db8:1::ffff/64 description INSIDE duplex auto hw-id 00:0c:29:44:3b:19 @@ -127,13 +132,15 @@ vif <vlan-id>`. set interfaces ethernet eth1 vif 100 description 'VLAN 100' set interfaces ethernet eth1 vif 100 address '192.168.100.1/24' + set interfaces ethernet eth1 vif 100 address '2001:db8:100::1/64' Resulting in: .. code-block:: sh ethernet eth1 { - address 192.168.0.1/24 + address 192.168.100.1/24 + address 2001:db8:100::1/64 description INSIDE duplex auto hw-id 00:0c:29:44:3b:19 @@ -145,7 +152,7 @@ Resulting in: } } -VLAN interfaces are shown as <name>.<vlan-id>, e.g. eth1.100: +VLAN interfaces are shown as `<name>.<vlan-id>`, e.g. `eth1.100`: .. code-block:: sh @@ -157,7 +164,7 @@ VLAN interfaces are shown as <name>.<vlan-id>, e.g. eth1.100: eth1 192.168.0.1/24 u/u INSIDE eth1.100 192.168.100.1/24 u/u VLAN 100 lo 127.0.0.1/8 u/u - ::1/128 + ::1/128 Bridging -------- @@ -180,6 +187,7 @@ normal interface. .. code-block:: sh set interfaces bridge br100 address '192.168.100.1/24' + set interfaces bridge br100 address '2001:db8:100::1/64' Example Result: @@ -187,6 +195,7 @@ Example Result: bridge br100 { address 192.168.100.1/24 + address 2001:db8:100::1/64 } [...] ethernet eth1 { @@ -266,6 +275,7 @@ You can combine (aggregate) 2 or more physical interfaces into a single logical one. It's called bonding, or LAG, or ether-channel, or port-channel. Create interface bondX, where X is just a number: + .. code-block:: sh set interfaces bonding bond0 description 'my-sw1 int 23 and 24' @@ -342,15 +352,16 @@ Set Virtual Tunnel interface .. code-block:: sh set interfaces vti vti0 address 192.168.2.249/30 + set interfaces vti vti0 address 2001:db8:2::249/64 Results in: .. code-block:: sh - vyos@vyos# show interfaces vti vti vti0 { address 192.168.2.249/30 + address 2001:db8:2::249/64 description "Description" } |